ElmAsmsc attributesPowerFactory Doubly-Fed Induction Machine
Every attribute of the PowerFactory Doubly-Fed Induction Machine (ElmAsmsc): 110 input parameters and 1044 result variables, with units and meaning. Copy a name into GetAttribute or SetAttribute.
What ElmAsmsc is
A doubly-fed induction machine (DFIG): an induction machine whose rotor is fed through a converter, as in many wind turbines.
- Class
ElmAsmsc, element class- PowerFactory name
- Doubly-Fed Induction Machine
- Terminal suffix
:bus1terminal ac,:bus2terminal r- Attributes
- 110 input parameters and 1044 result variables, in 7 calculations
Read and write ElmAsmsc in Python
import powerfactory
app = powerfactory.GetApplication() # GetApplicationExt() from outside PowerFactory
app.GetFromStudyCase("ComLdf").Execute() # results exist after a calculation
for obj in app.GetCalcRelevantObjects("*.ElmAsmsc"):
loading = obj.GetAttribute("c:loading") # Loading, %
print(obj.loc_name, loading)
obj = app.GetCalcRelevantObjects("*.ElmAsmsc")[0]
obj.SetAttribute("pgini", 2) # active power 2 MW- A result at a terminal of the doubly-fed induction machine needs the terminal in its name:
m:P:bus1, notm:P, which raisesAttributeError. - An input parameter is read and written with or without its
e:prefix:GetAttribute("outserv")andGetAttribute("e:outserv")give the same value. - RMS and EMT variables change over time: record them in a results object (
ElmRes) to read the whole curve.GetAttributeafter a run gives the value at the last time step.
- Input parameters110
- Load flow results216
- Short-circuit results254
- RMS simulation results226
- EMT simulation results132
- DC load flow results24
- Modal analysis results70
- Optimal power flow results122
- Basic data3
ElmAsmsc input parameters
The element data, as typed in GetAttribute and SetAttribute (the e: prefix is optional). Setting one changes the model.
| Attribute | Unit | Description |
|---|---|---|
loc_name | · | Name |
chr_name | · | Characteristic Name |
for_name | · | Foreign Key |
dat_src | · | Data source |
sernum | · | Serial Number |
commissionDate | · | Commissioning Date |
appr_modby | · | Modified by |
outserv | · | Out of Service |
iZoneBus | · | Zone |
iAreaBus | · | Area |
ngnum | · | parallel Machines |
i_mot | · | Generator/Motor |
constr | · | Year of Construction |
appr_status | · | Status |
i_conv | · | Use Integrated PWM Converter |
iAstabint | · | A-stable integration algorithm |
icurref | · | Harmonic currents referred to |
iHmcType | · | Harmonic Model |
iShcModel | · | Short-Circuit Model |
shcDeadband | · | Voltage deadband |
iNoShcContr | · | No Short-Circuit Contribution |
iconfed | · | Static converter-fed drive |
searchBlockTrf | · | Externally modelled unit transformer |
stowind | · | Wind Model |
iopt_windm | · | Wind Model |
pgini | MW | Active Power |
qgini | Mvar | Reactive Power |
mdmex | · | Exponent |
mdmlp | p.u. | Proportional Factor |
tstart | s | Starting Time |
Xe | Ohm | Reactance, Xe |
Re | Ohm | Resistance, Re |
Iks | kA | Transient Short-Circuit Current |
Kfactor | · | K Factor |
imax | p.u. | Max. Current |
uDeadband | p.u. | Deadband |
GPSlat | deg | Latitude / Northing |
GPSlon | deg | Longitude / Easting |
slipset | % | Slip |
Urot | V | Rated Slip Ring Voltage |
rcrow | p.u. | Crow-Bar Resistance |
xcrow | p.u. | Crow-Bar Reactance |
iWDmax | kA | Max. instantaneous short-circuit current, iWDmax |
kWD | · | Factor kappaWD |
rxWD | · | Ratio RWD/XWD |
IkWDmax | kA | Maximum current |
IkWDmin | kA | Minimum current |
r2iec | p.u. | Resistance, r2 |
x2iec | p.u. | Reactance, x2 |
r0iec | p.u. | Resistance, r0 |
x0iec | p.u. | Reactance, x0 |
lambda | m/s | Lambda |
beta | · | Beta |
appr_modif | · | Modified |
cimRdfId | · | RDF ID |
desc | · | Description |
fold_id | · | In Folder |
typ_id | · | TypeObject: TypAsmo* |
bus1 | · | Terminal ACObject: StaCubic |
bus2 | · | Terminal RObject: StaCubic |
doc_id | · | Additional Data |
pOwner | · | OwnerObject: ElmOwner |
pOperator | · | OperatorObject: ElmOperator |
p_pctrl | · | Controlled FlowObject: StaCubic* |
phmc | · | Harmonic CurrentsObject: TypHmccur,TypHmcopcur |
pFlicker | · | Flicker CoefficientsObject: TypFlicker |
pGRStoch | StoGen | Stochastic Model |
pPowerCrv | · | Wind Power CurveObject: TypPowercurve |
pCharYrMW | ChaVec,ChaVecfile,ChaTime,ChaProfile | Time Series Characteristics of Active Power Contribution (MW) |
pCharYrWS | ChaVec,ChaVecfile,ChaTime,ChaProfile | Time Series Characteristics for Wind Speed (m/s) |
cpHeadFold | · | Head Folder |
bus1_bar | · | Terminal AC |
bus2_bar | · | Terminal R |
cpGrid | · | GridObject: ElmNet |
cpZone | · | ZoneObject: ElmZone |
cpArea | · | AreaObject: ElmArea |
cpFeed | · | FeederObject: ElmFeeder |
ciDist | · | Distance from infeed in number of buses |
ciLater | · | Lateral Index |
ciDistRoot | · | Distance from first infeed in number of buses |
ciDistAll | · | Distance from infeed in number of buses including switches |
ciDistAllRoot | · | Distance from first infeed in number of buses including switches |
cpOwner | · | OwnerObject: ElmOwner |
cpOperator | · | OperatorObject: ElmOperator |
cpBranch | · | BranchObject: ElmBranch |
cpSite | · | SiteObject: ElmSite |
cpSubstat | · | SubstationObject: ElmSubstat,ElmTrfstat |
cpMeteostat | · | Meteo StationObject: ElmMeteostat |
ciOutaged | · | Planned Outage |
ciEnergized | · | Energized |
ciEarthed | · | Earthed |
cDisplayName | · | Display Name |
cpSupplyTransformer | · | Supplying TransformerObject: ElmTr?,ElmTrmult |
cpSupplyTrfStation | · | Supplying Secondary SubstationObject: ElmTrfstat |
cpSupplySubstation | · | Supplying SubstationObject: ElmSubstat |
Inom | kA | Nominal Current |
c_pmod | · | ModelObject: ElmComp |
cOperSpeed | p.u. | Operating speed |
cgnd | · | Star Point |
cTypHmc | · | Type of harmonic sources |
Irated | kA | Rated Current |
Ikss | kA | Subtransient Short-Circuit Current |
crtox | · | R to X'' ratio |
pblocktrf | · | Unit transformerObject: ElmTr2 |
Pngrel | MW | Based on rated active power (Pr) |
mean | m/s | Mean |
variance | m/s | Variance |
cnwsamples | · | Number of Samples |
cCategory | · | Plant Category |
cSubCategory | · | Subcategory |
ElmAsmsc load flow results
Read after ComLdf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1or :bus2 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1or :bus2 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1or :bus2 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1or :bus2 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1or :bus2 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1or :bus2 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1or :bus2 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1or :bus2 | p.u. | Current, Magnitude, referred to network |
m:I:bus1or :bus2 | kA | Current, Magnitude |
m:phii:bus1or :bus2 | deg | Current, Angle |
m:i1r:bus1or :bus2 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1or :bus2 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1or :bus2 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1or :bus2 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1or :bus2 | deg | Positive-Sequence Current, Angle |
m:P:bus1or :bus2 | MW | Active Power |
m:Q:bus1or :bus2 | Mvar | Reactive Power |
m:S:bus1or :bus2 | MVA | Apparent Power |
m:cosphi:bus1or :bus2 | · | Power Factor |
m:tanphi:bus1or :bus2 | · | tan(phi) |
m:Psum:bus1or :bus2 | MW | Total Active Power |
m:Qsum:bus1or :bus2 | Mvar | Total Reactive Power |
m:Ssum:bus1or :bus2 | MVA | Total Apparent Power |
m:cosphisum:bus1or :bus2 | · | Total Power Factor |
m:tanphisum:bus1or :bus2 | · | Total tan(phi) |
m:i1P:bus1or :bus2 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1or :bus2 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1or :bus2 | kA | Positive-Sequence Active Current |
m:I1Q:bus1or :bus2 | kA | Positive-Sequence Reactive Current |
m:ur:bus1or :bus2 | p.u. | Voltage, Real Part |
m:ui:bus1or :bus2 | p.u. | Voltage, Imaginary Part |
m:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
m:ir:bus1or :bus2 | p.u. | Current, Real Part |
m:ii:bus1or :bus2 | p.u. | Current, Imaginary Part |
m:i:bus1or :bus2 | p.u. | Current, Magnitude |
m:phiui:bus1or :bus2 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1or :bus2 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1or :bus2 | s | Fault Clearing Time |
m:Brkload:bus1or :bus2 | % | Breaker Loading |
m:Spu:bus1or :bus2 | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:bus1or :bus2 | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:bus1or :bus2 | deg | Zero-Sequence-Voltage, Angle |
m:u2:bus1or :bus2 | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:bus1or :bus2 | deg | Negative-Sequence-Voltage, Angle |
m:irnet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part, referred to network |
m:iinet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part, referred to network |
m:inet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude, referred to network |
m:I:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:bus1or :bus2 | p.u. | Zero-Sequence Current, Real Part |
m:i0i:bus1or :bus2 | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:bus1or :bus2 | p.u. | Zero-Sequence Current, Magnitude |
m:I0:bus1or :bus2 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1or :bus2 | kA | 3*I0 |
m:phii0:bus1or :bus2 | deg | Zero-Sequence Current, Angle |
m:i2r:bus1or :bus2 | p.u. | Negative-Sequence Current, Real Part |
m:i2i:bus1or :bus2 | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:bus1or :bus2 | p.u. | Negative-Sequence Current, Magnitude |
m:I2:bus1or :bus2 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1or :bus2 | deg | Negative-Sequence Current, Angle |
m:ubfacI:bus1or :bus2 | % | Current Unbalance Factor |
m:ubfacS:bus1or :bus2 | % | Power Unbalance Factor |
m:P:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:bus1or :bus2 | MW | Positive Sequence Active Power |
m:Q1:bus1or :bus2 | Mvar | Positive Sequence Reactive Power |
m:P2:bus1or :bus2 | MW | Negative Sequence Active Power |
m:Q2:bus1or :bus2 | Mvar | Negative Sequence Reactive Power |
m:P0:bus1or :bus2 | MW | Zero Sequence Active Power |
m:Q0:bus1or :bus2 | Mvar | Zero Sequence Reactive Power |
m:i2P:bus1or :bus2 | p.u. | Negative-Sequence Active Current |
m:i2Q:bus1or :bus2 | p.u. | Negative-Sequence Reactive Current |
m:I2P:bus1or :bus2 | kA | Negative-Sequence Active Current |
m:I2Q:bus1or :bus2 | kA | Negative-Sequence Reactive Current |
m:ur:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1or :bus2 | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:bus1or :bus2 | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:cosn | · | Rated Power Factor |
c:p | MW | Active Power (Electrical) |
c:q | Mvar | Reactive Power |
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:Pnom | MW | Total Nominal Active power |
c:rstr | p.u. | Stator Resistance |
c:xstr | p.u. | Stator Reactance |
c:xrtrA | p.u. | Rotor Reactance A |
c:xrtrB | p.u. | Rotor Reactance B |
c:xm | p.u. | Magnetising Reactance |
c:xmrtr | p.u. | Rotor Leakage Reactance |
c:frnom | Hz | Nominal Frequency |
c:loading | % | Loading |
c:i_con | · | flag |
c:i_slip | · | flag |
c:slipn | % | Nominal Slip |
c:i_mot | · | i_mot=0 |
c:mk | · | Stalling Torque |
c:xme | p.u. | Electrical Torque |
c:i_cdisp | · | Current Displacement |
c:rrtrA0 | p.u. | RrA0 |
c:xrtrA0 | p.u. | XrA0 |
c:rr0 | p.u. | Rr0 |
c:xr0 | p.u. | Xr0 |
c:rr1 | p.u. | Rr1 |
c:xr1 | p.u. | Xr1 |
c:Pmr | · | Amplification, Real Part |
c:Pmi | · | Amplification, Imaginary Part |
c:Unrot | kV | Rated Slip Ring Voltage |
c:zonewscale | · | Wind generation zone scaling factor |
c:psiM | p.u. | Magnetising Flux |
c:ksat | · | Saturation Factor |
c:xmsat | p.u. | Saturated Magnetising Reactance |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
c:usr | p.u. | Slip-ring Voltage, Real Part |
c:usi | p.u. | Slip-ring Voltage, Imaginary Part |
c:r2 | p.u. | Negative Sequence Resistance |
c:x2 | p.u. | Negative Sequence Reactance |
c:z0 | p.u. | Zero Sequence Impedance |
c:ze | p.u. | Grounding Impedance |
n:ur:bus1or :bus2 | p.u. | Voltage, Real Part |
n:ui:bus1or :bus2 | p.u. | Voltage, Imaginary Part |
n:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:upc:bus1or :bus2 | % | Voltage, Magnitude |
n:du:bus1or :bus2 | % | Voltage Deviation |
n:U:bus1or :bus2 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1or :bus2 | deg | Voltage, Angle |
n:phiurel:bus1or :bus2 | deg | Voltage, Relative Angle |
n:Ul:bus1or :bus2 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:u1pc:bus1or :bus2 | % | Voltage, Magnitude |
n:u1r:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:bus1or :bus2 | MW | Generation, Active Power |
n:Qgen:bus1or :bus2 | Mvar | Generation, Reactive Power |
n:Pmot:bus1or :bus2 | MW | Motor Load, Active Power |
n:Qmot:bus1or :bus2 | Mvar | Motor Load, Reactive Power |
n:Pload:bus1or :bus2 | MW | General Load, Active Power |
n:Qload:bus1or :bus2 | Mvar | General Load, Reactive Power |
n:Pcomp:bus1or :bus2 | MW | Compensation (Losses) |
n:Qcomp:bus1or :bus2 | Mvar | Compensation |
n:Pnet:bus1or :bus2 | MW | External Networks, Active Power |
n:Qnet:bus1or :bus2 | Mvar | External Networks, Reactive Power |
n:Pflow:bus1or :bus2 | MW | Power Flow, Active Power |
n:Qflow:bus1or :bus2 | Mvar | Power Flow, Reactive Power |
n:Pout:bus1or :bus2 | MW | Outgoing Flow, Active Power |
n:Qout:bus1or :bus2 | Mvar | Outgoing Power, Reactive Power |
n:Sout:bus1or :bus2 | MVA | Outgoing Power, Apparent Power |
n:cosphiout:bus1or :bus2 | · | Outgoing Power, Power Factor |
n:Pbalance:bus1or :bus2 | MW | Active Power Balance (=0) |
n:Qbalance:bus1or :bus2 | Mvar | Reactive Power Balance (=0) |
n:LossPdown:bus1or :bus2 | MW | Losses, downstream |
n:LossQdown:bus1or :bus2 | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:bus1or :bus2 | MW | Load losses, downstream |
n:LossQdownload:bus1or :bus2 | Mvar | Load losses, downstream |
n:LossPdownnoload:bus1or :bus2 | MW | No load losses, downstream |
n:LossQdownnoload:bus1or :bus2 | Mvar | No load losses, downstream |
n:du_feed:bus1or :bus2 | % | Difference from voltage at start of feeder |
n:ur:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1or :bus2 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1or :bus2 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1or :bus2 | kV | 3*U0 |
n:phiu0:bus1or :bus2 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1or :bus2 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1or :bus2 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1or :bus2 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1or :bus2 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1or :bus2 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1or :bus2 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1or :bus2 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1or :bus2 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1or :bus2 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1or :bus2 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:bus1or :bus2 | p.u. | Average-Voltage, Magnitude |
n:Um:bus1or :bus2 | kV | Average-Voltage, Magnitude |
n:uphtmin:bus1or :bus2 | p.u. | Minimum of Phase Technology dependent Voltage, Magnitude |
n:uphtmax:bus1or :bus2 | p.u. | Maximum of Phase Technology dependent Voltage, Magnitude |
n:ubfac:bus1or :bus2 | % | Unbalance Factor |
s:usr | p.u. | Slip-ring Voltage, Real Part |
s:usi | p.u. | Slip-ring Voltage, Imaginary Part |
s:slip | % | Slip setpoint |
ElmAsmsc short-circuit results
Read after ComShc with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:I:bus1or :bus2 | kA | Short-Circuit Current, Magnitude |
m:phii:bus1or :bus2 | deg | Phase Current, Angle |
m:i1:bus1or :bus2 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1or :bus2 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1or :bus2 | deg | Positive-Sequence Current, Angle |
m:P:bus1or :bus2 | MW | Active Power |
m:Q:bus1or :bus2 | Mvar | Reactive Power |
m:i1P:bus1or :bus2 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1or :bus2 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1or :bus2 | kA | Positive-Sequence Active Current |
m:I1Q:bus1or :bus2 | kA | Positive-Sequence Reactive Current |
m:phiui:bus1or :bus2 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1or :bus2 | deg | Angle between Voltage and Current in Positive-Sequence System |
m:Tfct:bus1or :bus2 | s | Fault Clearing Time |
m:Ikss:bus1or :bus2 | kA | Initial Short-Circuit Current |
m:ikss:bus1or :bus2 | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:bus1or :bus2 | MVA | Initial Short-Circuit Power |
m:ip:bus1or :bus2 | kA | Peak Short-Circuit Current |
m:maxIkss:bus1or :bus2 | kA | Max. Initial Short-Circuit Current |
m:maxip:bus1or :bus2 | kA | Max. Peak Short-Circuit Current |
m:maxIth:bus1or :bus2 | kA | Max. Thermal equivalent Short-Circuit Current |
m:maxIb:bus1or :bus2 | kA | Max. Breaking Current |
m:R:bus1or :bus2 | Ohm | Fault Impedance, Real Part |
m:X:bus1or :bus2 | Ohm | Fault Impedance, Imaginary Part |
m:Z:bus1or :bus2 | Ohm | Fault Impedance, Magnitude |
m:phiz:bus1or :bus2 | deg | Fault Impedance, Angle |
m:Rs:bus1or :bus2 | Ohm | Source Impedance, Real Part |
m:Xs:bus1or :bus2 | Ohm | Source Impedance, Imaginary Part |
m:Zs:bus1or :bus2 | Ohm | Source Impedance, Magnitude |
m:phizs:bus1or :bus2 | deg | Source Impedance, Angle |
m:BrkIpload:bus1or :bus2 | % | Breaker Loading (peak) |
m:Ib:bus1or :bus2 | kA | Short-Circuit Breaking Current |
m:Sb:bus1or :bus2 | MVA | Short-Circuit Breaking Power |
m:Ith:bus1or :bus2 | kA | Thermal equivalent Short-Circuit Current |
m:zSbase:bus1or :bus2 | p.u. | Fault Impedance, Magnitude |
m:XtoR:bus1or :bus2 | · | X/R ratio |
m:cosphiui:bus1or :bus2 | · | cosphi |
m:BrkIbload:bus1or :bus2 | % | Breaker Loading (breaking) |
m:BrkmaxIb:bus1or :bus2 | kA | Max. Breaking Current (breaker time) |
m:Ik:bus1or :bus2 | kA | Steady-State Short-Circuit Current |
m:I:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, Magnitude |
m:phii:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:I0:bus1or :bus2 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1or :bus2 | kA | 3*I0 |
m:phii0:bus1or :bus2 | deg | Zero-Sequence Current, Angle |
m:I2:bus1or :bus2 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1or :bus2 | deg | Negative-Sequence Current, Angle |
m:P:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:Psum:bus1or :bus2 | MW | Total Active Power |
m:Qsum:bus1or :bus2 | Mvar | Total Reactive Power |
m:cosphisum:bus1or :bus2 | · | Total Power Factor |
m:P2:bus1or :bus2 | MW | P2 |
m:Q2:bus1or :bus2 | Mvar | Q2 |
m:P0:bus1or :bus2 | MW | P0 |
m:phiui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1or :bus2 | deg | Angle between Voltage and Current in Zero-Sequence System |
m:phiu2i2:bus1or :bus2 | deg | Angle between Voltage and Current in Negative-Sequence System |
m:TfctPh:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:Ikss:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
m:ikss:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
m:Skssx3:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
m:ip:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
m:Z:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Fault Impedance, Magnitude |
m:phiz:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Fault Impedance, Angle |
m:Zl:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Line-Line Fault Impedance, Magnitude |
m:phizl:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Line Fault Impedance, Angle |
m:Z0:bus1or :bus2 | Ohm | Zero-Sequence Fault Impedance, Magnitude |
m:phiz0:bus1or :bus2 | deg | Zero-Sequence Fault Impedance, Angle |
m:z0Sbase:bus1or :bus2 | p.u. | Zero-Sequence Fault Impedance, Magnitude |
m:cosphiu1i1:bus1or :bus2 | · | Positive-Sequence cosphi |
m:I0x3watt:bus1or :bus2 | kA | Earth-Fault Residual Current |
m:I0x3var:bus1or :bus2 | kA | Capacitive Earth-Fault Current |
m:Q0cap:bus1or :bus2 | Mvar | Q0 capacitive |
m:Rfrel:bus1or :bus2 | Ohm | Relay Impedance, Real Part |
m:Xfrel:bus1or :bus2 | Ohm | Relay Impedance, Imaginary Part |
m:Zfrel:bus1or :bus2 | Ohm | Relay Impedance, Magnitude |
m:phizfrel:bus1or :bus2 | deg | Relay Impedance, Angle |
m:Zf:bus1or :bus2 | Ohm | Meas. Fault Impedance, Magnitude |
m:phizf:bus1or :bus2 | deg | Meas. Fault Impedance, Angle |
c:cosn | · | Power Factor |
c:z1 | p.u. | Positive-sequence impedance |
c:uini | p.u. | Internal positive-sequence voltage |
c:imax | p.u. | Max. Current |
c:Zwd | p.u. | Impedance of doubly-fed asynchronous generator |
c:Prm | MW | Rated Mechanical Power |
c:z0 | p.u. | Zero-sequence impedance |
c:ze | p.u. | Grounding impedance |
c:z2 | p.u. | Negative-sequence impedance |
n:ur:bus1or :bus2 | p.u. | Voltage, Real Part |
n:ui:bus1or :bus2 | p.u. | Voltage, Imaginary Part |
n:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:upc:bus1or :bus2 | % | Voltage, Magnitude |
n:du:bus1or :bus2 | % | Voltage Deviation |
n:U:bus1or :bus2 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1or :bus2 | deg | Voltage, Angle |
n:Ul:bus1or :bus2 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:u1pc:bus1or :bus2 | % | Voltage, Magnitude |
n:u1r:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Ikss:bus1or :bus2 | kA | Initial Short-Circuit Current |
n:I:bus1or :bus2 | kA | Short-Circuit Current |
n:phii:bus1or :bus2 | deg | Phase Current, Angle |
n:Skss:bus1or :bus2 | MVA | Initial Short-Circuit Power |
n:ip:bus1or :bus2 | kA | Peak Short-Circuit Current |
n:Ib:bus1or :bus2 | kA | Short-Circuit Breaking Current |
n:Sb:bus1or :bus2 | MVA | Short-Circuit Breaking Power |
n:idc:bus1or :bus2 | kA | Decaying Component |
n:Ith:bus1or :bus2 | kA | Thermal equivalent Short-Circuit Current |
n:R1toX1:bus1or :bus2 | · | R1/X1 ratio (Zk") |
n:X1toR1:bus1or :bus2 | · | X1/R1 ratio (Zk") |
n:R:bus1or :bus2 | Ohm | Short-Circuit Impedance, Real Part |
n:X:bus1or :bus2 | Ohm | Short-Circuit Impedance, Imaginary Part |
n:Z:bus1or :bus2 | Ohm | Short-Circuit Impedance, Magnitude |
n:phiz:bus1or :bus2 | deg | Short-Circuit Impedance, Angle |
n:urpref:bus1or :bus2 | p.u. | Pre-fault Voltage, Real Part |
n:uipref:bus1or :bus2 | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:bus1or :bus2 | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:bus1or :bus2 | % | Pre-fault Voltage, Magnitude |
n:Upref:bus1or :bus2 | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:bus1or :bus2 | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:bus1or :bus2 | deg | Pre-fault Voltage, Angle |
n:phiui:bus1or :bus2 | deg | Angle between Voltage and Current |
n:Ithload:bus1or :bus2 | % | Loading, Thermal equivalent Current |
n:Ipload:bus1or :bus2 | % | Loading, Peak Short-Circuit Current |
n:Ithrtk:bus1or :bus2 | kA | Rated Short-Time Current (Tk) |
n:XtoR:bus1or :bus2 | · | X/R ratio (peak) |
n:RtoX:bus1or :bus2 | · | R/X ratio (peak) |
n:XtoR_b:bus1or :bus2 | · | X/R ratio (dc) |
n:RtoX_b:bus1or :bus2 | · | R/X ratio (dc) |
n:fctof_b:bus1or :bus2 | · | Equivalent Frequency fc/f (dc) |
n:rSbase:bus1or :bus2 | p.u. | Short-Circuit Impedance, Real Part |
n:xSbase:bus1or :bus2 | p.u. | Short-Circuit Impedance, Imaginary Part |
n:zSbase:bus1or :bus2 | p.u. | Short-Circuit Impedance, Magnitude |
n:Tn:bus1or :bus2 | ms | Grid Time Constant |
n:Ik:bus1or :bus2 | kA | Steady-State Short-Circuit Current |
n:cfac:bus1or :bus2 | · | Voltage Factor |
n:Iasy:bus1or :bus2 | kA | Asymmetrical Breaking Current |
n:ur:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1or :bus2 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1or :bus2 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1or :bus2 | kV | 3*U0 |
n:phiu0:bus1or :bus2 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1or :bus2 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1or :bus2 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1or :bus2 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1or :bus2 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1or :bus2 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1or :bus2 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1or :bus2 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1or :bus2 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1or :bus2 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1or :bus2 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:Ikss:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
n:I:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:phii:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
n:Skss:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
n:Skssx3:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
n:ip:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
n:Ib:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Breaking Current |
n:Sb:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MVA | Short-Circuit Breaking Power |
n:Ith:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Thermal equivalent Short-Circuit Current |
n:Ithmax:bus1or :bus2 | kA | Max. Thermal equivalent Short-Circuit Current |
n:R0:bus1or :bus2 | Ohm | Zero-Sequence Impedance, Real Part |
n:X0:bus1or :bus2 | Ohm | Zero-Sequence Impedance, Imaginary Part |
n:Z0:bus1or :bus2 | Ohm | Zero-Sequence Impedance, Magnitude |
n:phiz0:bus1or :bus2 | deg | Zero-Sequence Impedance, Angle |
n:r0Sbase:bus1or :bus2 | p.u. | Zero-Sequence Impedance, Real Part |
n:x0Sbase:bus1or :bus2 | p.u. | Zero-Sequence Impedance, Imaginary Part |
n:z0Sbase:bus1or :bus2 | p.u. | Zero-Sequence Impedance, Magnitude |
n:R1:bus1or :bus2 | Ohm | Positive-Sequence Impedance, Real Part |
n:X1:bus1or :bus2 | Ohm | Positive-Sequence Impedance, Imaginary Part |
n:Z1:bus1or :bus2 | Ohm | Positive-Sequence Impedance, Magnitude |
n:phiz1:bus1or :bus2 | deg | Positive-Sequence Impedance, Angle |
n:r1Sbase:bus1or :bus2 | p.u. | Positive-Sequence Impedance, Real Part |
n:x1Sbase:bus1or :bus2 | p.u. | Positive-Sequence Impedance, Imaginary Part |
n:z1Sbase:bus1or :bus2 | p.u. | Positive-Sequence Impedance, Magnitude |
n:R2:bus1or :bus2 | Ohm | Negative-Sequence Impedance, Real Part |
n:X2:bus1or :bus2 | Ohm | Negative-Sequence Impedance, Imaginary Part |
n:Z2:bus1or :bus2 | Ohm | Negative-Sequence Impedance, Magnitude |
n:phiz2:bus1or :bus2 | deg | Negative-Sequence Impedance, Angle |
n:r2Sbase:bus1or :bus2 | p.u. | Negative-Sequence Impedance, Real Part |
n:x2Sbase:bus1or :bus2 | p.u. | Negative-Sequence Impedance, Imaginary Part |
n:z2Sbase:bus1or :bus2 | p.u. | Negative-Sequence Impedance, Magnitude |
n:R0toX0:bus1or :bus2 | · | R0/X0 ratio (Zk") |
n:X0toR0:bus1or :bus2 | · | X0/R0 ratio (Zk") |
n:R2toX2:bus1or :bus2 | · | R2/X2 ratio (Zk") |
n:X2toR2:bus1or :bus2 | · | X2/R2 ratio (Zk") |
n:R:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Ground |
n:X:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Ground |
n:Z:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Ground |
n:phiz:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Ground |
n:Rl:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Line |
n:Xl:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Line |
n:Zl:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Line |
n:phizl:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Line |
n:Rln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Neutral |
n:Xln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Neutral |
n:Zln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Neutral |
n:phizln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Neutral |
n:Rn:bus1or :bus2 | Ohm | Network Resistance, Neutral |
n:Xn:bus1or :bus2 | Ohm | Network Reactance, Neutral |
n:Zn:bus1or :bus2 | Ohm | Network Impedance, Neutral |
n:phizn:bus1or :bus2 | deg | Angle of Network Impedance, Neutral |
n:eff:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | · | Earth Fault Factor |
n:X0toX1:bus1or :bus2 | · | X0/X1 |
n:In:bus1or :bus2 | kA | Neutral Current, Magnitude |
n:phiin:bus1or :bus2 | deg | Neutral Current, Angle |
n:I0:bus1or :bus2 | kA | Zero-Sequence Current, Magnitude |
n:I0x3:bus1or :bus2 | kA | 3*I0 |
n:phii0:bus1or :bus2 | deg | Zero-Sequence Current, Angle |
n:I1:bus1or :bus2 | kA | Positive-Sequence Current, Magnitude |
n:phii1:bus1or :bus2 | deg | Positive-Sequence Current, Angle |
n:I2:bus1or :bus2 | kA | Negative-Sequence Current, Magnitude |
n:phii2:bus1or :bus2 | deg | Negative-Sequence Current, Angle |
n:urpref:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Real Part |
n:uipref:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Pre-fault Voltage, Magnitude |
n:Upref:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Pre-fault Voltage, Angle |
n:phiui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
n:phiu1i1:bus1or :bus2 | deg | Angle between Voltage and Current in positive sequence system |
n:phiu2i2:bus1or :bus2 | deg | Angle between Voltage and Current in negative sequence system |
n:phiu0i0:bus1or :bus2 | deg | Angle between Voltage and Current in zero-sequence system |
n:Ik:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Steady-State Short-Circuit Current |
n:in:bus1or :bus2 | p.u. | Neutral Current, Magnitude |
n:i0r:bus1or :bus2 | p.u. | Zero-Sequence Current, Real Part |
n:i0i:bus1or :bus2 | p.u. | Zero-Sequence Current, Imaginary Part |
n:i0:bus1or :bus2 | p.u. | Zero-Sequence Current, Magnitude |
n:i1r:bus1or :bus2 | p.u. | Positive-Sequence Current, Real Part |
n:i1i:bus1or :bus2 | p.u. | Positive-Sequence Current, Imaginary Part |
n:i1:bus1or :bus2 | p.u. | Positive-Sequence Current, Magnitude |
n:i2r:bus1or :bus2 | p.u. | Negative-Sequence Current, Real Part |
n:i2i:bus1or :bus2 | p.u. | Negative-Sequence Current, Imaginary Part |
n:i2:bus1or :bus2 | p.u. | Negative-Sequence Current, Magnitude |
ElmAsmsc rms simulation results
Read after ComInc (RMS) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1or :bus2 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1or :bus2 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1or :bus2 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1or :bus2 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1or :bus2 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1or :bus2 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1or :bus2 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1or :bus2 | p.u. | Current, Magnitude, referred to network |
m:I:bus1or :bus2 | kA | Current, Magnitude |
m:phii:bus1or :bus2 | deg | Current, Angle |
m:i1r:bus1or :bus2 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1or :bus2 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1or :bus2 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1or :bus2 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1or :bus2 | deg | Positive-Sequence Current, Angle |
m:P:bus1or :bus2 | MW | Active Power |
m:Q:bus1or :bus2 | Mvar | Reactive Power |
m:S:bus1or :bus2 | MVA | Apparent Power |
m:cosphi:bus1or :bus2 | · | Power Factor |
m:tanphi:bus1or :bus2 | · | tan(phi) |
m:Psum:bus1or :bus2 | MW | Total Active Power |
m:Qsum:bus1or :bus2 | Mvar | Total Reactive Power |
m:Ssum:bus1or :bus2 | MVA | Total Apparent Power |
m:cosphisum:bus1or :bus2 | · | Total Power Factor |
m:tanphisum:bus1or :bus2 | · | Total tan(phi) |
m:i1P:bus1or :bus2 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1or :bus2 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1or :bus2 | kA | Positive-Sequence Active Current |
m:I1Q:bus1or :bus2 | kA | Positive-Sequence Reactive Current |
m:ur:bus1or :bus2 | p.u. | Voltage, Real Part |
m:ui:bus1or :bus2 | p.u. | Voltage, Imaginary Part |
m:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
m:ir:bus1or :bus2 | p.u. | Current, Real Part |
m:ii:bus1or :bus2 | p.u. | Current, Imaginary Part |
m:i:bus1or :bus2 | p.u. | Current, Magnitude |
m:phiui:bus1or :bus2 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1or :bus2 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1or :bus2 | s | Fault Clearing Time |
m:Brkload:bus1or :bus2 | % | Breaker Loading |
m:Spu:bus1or :bus2 | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:bus1or :bus2 | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:bus1or :bus2 | deg | Zero-Sequence-Voltage, Angle |
m:u2:bus1or :bus2 | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:bus1or :bus2 | deg | Negative-Sequence-Voltage, Angle |
m:irnet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:iinet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:inet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:I:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:bus1or :bus2 | p.u. | Zero-Sequence Current, Real Part |
m:i0i:bus1or :bus2 | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:bus1or :bus2 | p.u. | Zero-Sequence Current, Magnitude |
m:I0:bus1or :bus2 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1or :bus2 | kA | 3*I0 |
m:phii0:bus1or :bus2 | deg | Zero-Sequence Current, Angle |
m:i2r:bus1or :bus2 | p.u. | Negative-Sequence Current, Real Part |
m:i2i:bus1or :bus2 | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:bus1or :bus2 | p.u. | Negative-Sequence Current, Magnitude |
m:I2:bus1or :bus2 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1or :bus2 | deg | Negative-Sequence Current, Angle |
m:P:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:bus1or :bus2 | MW | Positive Sequence Active Power |
m:Q1:bus1or :bus2 | Mvar | Positive Sequence Reactive Power |
m:P2:bus1or :bus2 | MW | Negative Sequence Active Power |
m:Q2:bus1or :bus2 | Mvar | Negative Sequence Reactive Power |
m:P0:bus1or :bus2 | MW | Zero Sequence Active Power |
m:Q0:bus1or :bus2 | Mvar | Zero Sequence Reactive Power |
m:i2P:bus1or :bus2 | p.u. | Negative-Sequence Active Current |
m:i2Q:bus1or :bus2 | p.u. | Negative-Sequence Reactive Current |
m:I2P:bus1or :bus2 | kA | Negative-Sequence Active Current |
m:I2Q:bus1or :bus2 | kA | Negative-Sequence Reactive Current |
m:ur:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1or :bus2 | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:bus1or :bus2 | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:cosn | · | Rated Power Factor |
c:p | MW | Active Power (Electrical) |
c:rstr | p.u. | Stator Resistance |
c:xstr | p.u. | Stator Reactance |
c:rrtrA | p.u. | Rotor Resistance A |
c:rrtrB | p.u. | Rotor Resistance B |
c:xrtrA | p.u. | Rotor Reactance A |
c:xrtrB | p.u. | Rotor Reactance B |
c:xm | p.u. | Magnetising Reactance |
c:xmrtr | p.u. | Rotor Leakage Reactance |
c:frnom | Hz | Nominal Frequency |
c:i_mot | · | i_mot=0 |
c:Pmr | · | Amplification, Real Part |
c:Pmi | · | Amplification, Imaginary Part |
c:Unrot | kV | Rated Slip Ring Voltage |
c:psiM | p.u. | Magnetising flux |
c:ksat | · | Saturation factor |
c:xmsat | p.u. | Saturated magnetising reactance |
c:xmem | p.u. | Electrical Torque |
c:xmt | p.u. | Mechanical Torque |
c:slip | % | Slip |
c:tag | s | Acceleration Time Constant |
c:i_star | · | Star/Delta |
c:xss | p.u. | Subtransient Reactance |
c:addmt | p.u. | Additional Torque |
c:fe | p.u. | Electrical Frequency |
c:usr | p.u. | Rotor Voltage, Real Part |
c:usi | p.u. | Rotor Voltage, Imaginary Part |
c:urd | p.u. | Rotor Voltage, d-Axis |
c:urq | p.u. | Rotor Voltage, q-Axis |
c:ura | p.u. | Rotor Voltage, Phase a |
c:urb | p.u. | Rotor Voltage, Phase b |
c:urc | p.u. | Rotor Voltage, Phase c |
c:Ird | kA | Rotor Current, d-Axis |
c:Irq | kA | Rotor Current, q-Axis |
c:Ira | kA | Rotor Current, Phase a |
c:Irb | kA | Rotor Current, Phase b |
c:Irc | kA | Rotor Current, Phase c |
c:xradd | p.u. | Additional Rotor Reactance |
c:xstadd | p.u. | Additional Stator Reactance |
c:Irot | kA | Rotor Current, Magnitude of Phasor |
c:rcrow | · | Crow-Bar Resistance |
c:xcrow | · | Crow-Bar Reactance |
c:set_bypass | · | Set Rotor-Bypass |
c:reset_bypass | · | Reset Rotor-Bypass |
c:z0 | p.u. | Zero Sequence Impedance |
c:ze | p.u. | Grounding Impedance |
c:z2 | p.u. | Negative Sequence Impedance |
n:ur:bus1or :bus2 | p.u. | Voltage, Real Part |
n:ui:bus1or :bus2 | p.u. | Voltage, Imaginary Part |
n:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:upc:bus1or :bus2 | % | Voltage, Magnitude |
n:du:bus1or :bus2 | % | Voltage Deviation |
n:U:bus1or :bus2 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1or :bus2 | deg | Voltage, Angle |
n:phiurel:bus1or :bus2 | deg | Voltage, Relative Angle |
n:Ul:bus1or :bus2 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:u1pc:bus1or :bus2 | % | Voltage, Magnitude |
n:u1r:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:ishc:bus1or :bus2 | p.u. | Short-Circuit Current, magnitude |
n:Ishc:bus1or :bus2 | kA | Short-Circuit Current, magnitude |
n:fe:bus1or :bus2 | p.u. | Electrical Frequency |
n:dfehz:bus1or :bus2 | Hz | Deviation of the El. Frequency |
n:fehz:bus1or :bus2 | Hz | Electrical Frequency |
n:frnom:bus1or :bus2 | Hz | Nominal Frequency |
n:ishcr:bus1or :bus2 | p.u. | Short-Circuit Current, real |
n:ishci:bus1or :bus2 | p.u. | Short-Circuit Current, imag |
n:dfedt:bus1or :bus2 | p.u./s | Derivative of El. Frequency |
n:ur:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1or :bus2 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1or :bus2 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1or :bus2 | kV | 3*U0 |
n:phiu0:bus1or :bus2 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1or :bus2 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1or :bus2 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1or :bus2 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1or :bus2 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1or :bus2 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1or :bus2 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1or :bus2 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1or :bus2 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1or :bus2 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1or :bus2 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:bus1or :bus2 | p.u. | Average-Voltage, Magnitude |
n:Um:bus1or :bus2 | kV | Average-Voltage, Magnitude |
n:ishc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, magnitude |
n:Ishc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, magnitude |
n:inshc:bus1or :bus2 | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:bus1or :bus2 | kA | Neutral Short-Circuit Current, magnitude |
n:ishcr:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, real |
n:ishci:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, imag |
s:speed | p.u. | Speed |
s:psiA1_r | p.u. | Flux, Loop A, Real Part |
s:psiA1_i | p.u. | Flux, Loop A, Imaginary Part |
s:psiA2_r | p.u. | Flux, Loop A, Real Part |
s:psiA2_i | p.u. | Flux, Loop A, Imaginary Part |
s:psiB_r | p.u. | Flux, Loop B, Real Part |
s:psiB_i | p.u. | Flux, Loop B, Imaginary Part |
s:pt | p.u. | Turbine Power |
s:xmdm | p.u. | MDM-Torque |
s:rradd | p.u. | Additional Rotor Resistance |
s:xspeed | p.u. | Speed |
s:pgt | p.u. | Active power |
s:xme | p.u. | Electrical Torque |
s:Pmd | · | PWM Amplification, Real Part |
s:Pmq | · | PWM Amplification, Imaginary Part |
s:ird | p.u. | Rotor Current, d-Axis |
s:irq | p.u. | Rotor Current, q-Axis |
s:xphim | rad | Rotor Angle |
s:psis_r | p.u. | Stator Flux, Real Part |
s:psis_i | p.u. | Stator Flux, Imaginary Part |
s:cosphim | · | cos(phim) |
s:sinphim | · | sin(phim) |
s:psir_r | p.u. | Rotor Flux, Real Part |
s:psir_i | p.u. | Rotor Flux, Imaginary Part |
s:speedIn | p.u. | Speed input |
ElmAsmsc emt simulation results
Read after ComInc (EMT) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:u0:bus1or :bus2 | p.u. | Zero-Sequence-Voltage |
m:u1r:bus1or :bus2 | p.u. | Voltage Phasor, Real Part |
m:u1i:bus1or :bus2 | p.u. | Voltage Phasor, Imaginary Part |
m:u1:bus1or :bus2 | p.u. | Voltage Phasor, Magnitude |
m:U1:bus1or :bus2 | kV | Line-Ground Voltage Phasor, Magnitude |
m:U1l:bus1or :bus2 | kV | Line-Line Voltage Phasor, Magnitude |
m:phiu1:bus1or :bus2 | deg | Voltage Phasor, Angle |
m:inet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, referred to network |
m:I:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Phase Current |
m:i0:bus1or :bus2 | p.u. | Zero-Sequence Current |
m:I0:bus1or :bus2 | kA | Zero-Sequence Current |
m:I0x3:bus1or :bus2 | kA | 3*I0 |
m:i1r:bus1or :bus2 | p.u. | Current Phasor, Real Part |
m:i1i:bus1or :bus2 | p.u. | Current Phasor, Imaginary Part |
m:i1:bus1or :bus2 | p.u. | Current Phasor, Magnitude |
m:I1:bus1or :bus2 | kA | Current Phasor, Magnitude |
m:phii1:bus1or :bus2 | deg | Current Phasor, Angle |
m:P:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Psum:bus1or :bus2 | MW | Power-Phasor, Active Power |
m:Qsum:bus1or :bus2 | Mvar | Power Phasor, Reactive Part |
m:Ssum:bus1or :bus2 | MVA | Power Phasor, Apparent Power |
m:i1P:bus1or :bus2 | p.u. | Current Phasor, Active Current |
m:i1Q:bus1or :bus2 | p.u. | Current Phasor, Reactive Current |
m:I1P:bus1or :bus2 | kA | Current Phasor, Active Current |
m:I1Q:bus1or :bus2 | kA | Current Phasor, Reactive Current |
m:u:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
m:i:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current |
m:phiu1i1:bus1or :bus2 | deg | Angle between Voltage and Current Phasor |
m:Tfct:bus1or :bus2 | s | Fault Clearing Time |
m:TfctPh:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:unet:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, referred to network |
m:cosphi1:bus1or :bus2 | · | Power-Phasor, Power-Factor |
c:cosn | · | Rated Power Factor |
c:p | MW | Active Power (Electrical) |
c:rstr | p.u. | Stator Resistance |
c:xstr | p.u. | Stator Reactance |
c:rrtrA | p.u. | Rotor Resistance A |
c:rrtrB | p.u. | Rotor Resistance B |
c:xrtrA | p.u. | Rotor Reactance A |
c:xrtrB | p.u. | Rotor Reactance B |
c:xm | p.u. | Magnetising Reactance |
c:xmrtr | p.u. | Rotor Leakage Reactance |
c:frnom | Hz | Nominal Frequency |
c:i_mot | · | i_mot=0 |
c:Pmr | · | Amplification, Real Part |
c:Pmi | · | Amplification, Imaginary Part |
c:Unrot | kV | Rated Slip Ring Voltage |
c:psiM | p.u. | Magnetising flux |
c:ksat | · | Saturation factor |
c:xmsat | p.u. | Saturated magnetising reactance |
c:xmem | p.u. | Electrical Torque |
c:xmt | p.u. | Mechanical Torque |
c:slip | % | Slip |
c:tag | s | Acceleration Time Constant |
c:i_star | · | Star/Delta |
c:xss | p.u. | Subtransient Reactance |
c:addmt | p.u. | Additional Torque |
c:urd | p.u. | Rotor Voltage, d-Axis |
c:urq | p.u. | Rotor Voltage, q-Axis |
c:ura | p.u. | Rotor Voltage, Phase a |
c:urb | p.u. | Rotor Voltage, Phase b |
c:urc | p.u. | Rotor Voltage, Phase c |
c:Ird | kA | Rotor Current, d-Axis |
c:Irq | kA | Rotor Current, q-Axis |
c:Ira | kA | Rotor Current, Phase a |
c:Irb | kA | Rotor Current, Phase b |
c:Irc | kA | Rotor Current, Phase c |
c:xradd | p.u. | Additional Rotor Reactance |
c:xstadd | p.u. | Additional Stator Reactance |
c:Irot | kA | Rotor Current, Magnitude of Phasor |
c:rcrow | · | Crow-Bar Resistance |
c:xcrow | · | Crow-Bar Reactance |
c:set_bypass | · | Set Rotor-Bypass |
c:reset_bypass | · | Reset Rotor-Bypass |
c:ccomp | p.u. | Capacitor for Compensation |
n:u:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
n:upc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Phase Voltage |
n:U:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Phase Voltage |
n:ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage |
n:ulpc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage |
n:Ul:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage |
n:u0:bus1or :bus2 | p.u. | Zero-Sequence-Voltage |
n:U0:bus1or :bus2 | kV | Zero-Sequence-Voltage |
n:U0x3:bus1or :bus2 | kV | 3*U0 |
n:u1:bus1or :bus2 | p.u. | Voltage Phasor, Magnitude |
n:u1pc:bus1or :bus2 | % | Voltage Phasor, Magnitude |
n:u1r:bus1or :bus2 | p.u. | Voltage Phasor, Real Part |
n:u1i:bus1or :bus2 | p.u. | Voltage Phasor, Imaginary Part |
n:U1:bus1or :bus2 | kV | Voltage Phasor, Magnitude |
n:phiu1:bus1or :bus2 | deg | Voltage Phasor, Angle |
n:U1l:bus1or :bus2 | kV | Line-Line Voltage Phasor, Magnitude |
n:uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage |
n:Uln:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage |
n:un:bus1or :bus2 | p.u. | Neutral-Ground Voltage |
n:Un:bus1or :bus2 | kV | Neutral-Ground Voltage |
n:ishc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current |
n:Ishc:bus1:Aor :bus2; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:inshc:bus1or :bus2 | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:bus1or :bus2 | kA | Neutral Short-Circuit Current, magnitude |
n:fe:bus1or :bus2 | p.u. | Electrical Frequency |
n:dfehz:bus1or :bus2 | Hz | Deviation of the El. Frequency |
n:fehz:bus1or :bus2 | Hz | Electrical Frequency |
n:frnom:bus1or :bus2 | Hz | Nominal Frequency |
s:speed | p.u. | Speed |
s:psiA1_r | p.u. | Flux, Loop A, Real Part |
s:psiA1_i | p.u. | Flux, Loop A, Imaginary Part |
s:psiA2_r | p.u. | Flux, Loop A, Real Part |
s:psiA2_i | p.u. | Flux, Loop A, Imaginary Part |
s:psiB_r | p.u. | Flux, Loop B, Real Part |
s:psiB_i | p.u. | Flux, Loop B, Imaginary Part |
s:pt | p.u. | Turbine Power |
s:xmdm | p.u. | MDM-Torque |
s:rradd | p.u. | Additional Rotor Resistance |
s:xspeed | p.u. | Speed |
s:pgt | p.u. | Active power |
s:xme | p.u. | Electrical Torque |
s:Pmd | · | PWM Amplification, Real Part |
s:Pmq | · | PWM Amplification, Imaginary Part |
s:phim | rad | Mechanical Angle (with reference to synchronous reference frame) |
s:ird | p.u. | Rotor Current, d-Axis |
s:irq | p.u. | Rotor Current, q-Axis |
s:xphim | rad | Rotor Angle |
s:psis_r | p.u. | Stator Flux, Real Part |
s:psis_i | p.u. | Stator Flux, Imaginary Part |
s:cosphim | · | cos(phim) |
s:sinphim | · | sin(phim) |
s:psir_r | p.u. | Rotor-Flux, Real Part |
s:psir_i | p.u. | Rotor-Flux, Imaginary Part |
s:speedIn | p.u. | Speed input |
s:phi | rad | Angle |
s:cosphi | · | cos(phi) |
s:sinphi | · | sin(phi) |
ElmAsmsc dc load flow results
Read after ComLdf (DC) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:P:bus1or :bus2 | MW | Active Power |
m:Q:bus1or :bus2 | Mvar | Reactive Power |
c:cosn | · | Rated Power Factor |
c:p | MW | Active Power (Electrical) |
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:Pnom | MW | Total Nominal Active power |
c:loading | % | Loading |
c:i_mot | · | i_mot=0 |
c:zonewscale | · | Wind generation zone scaling factor |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
n:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:upc:bus1or :bus2 | % | Voltage, Magnitude |
n:U:bus1or :bus2 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1or :bus2 | deg | Voltage, Angle |
n:phiurel:bus1or :bus2 | deg | Voltage, Relative Angle |
n:Ul:bus1or :bus2 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:Pgen:bus1or :bus2 | MW | Generation, Active Power |
n:Pmot:bus1or :bus2 | MW | Motor Load, Active Power |
n:Pload:bus1or :bus2 | MW | General Load, Active Power |
n:Pcomp:bus1or :bus2 | MW | Compensation (Losses) |
n:Pnet:bus1or :bus2 | MW | External Networks, Active Power |
n:Pflow:bus1or :bus2 | MW | Power Flow, Active Power |
ElmAsmsc modal analysis results
Read after ComMod with GetAttribute. c: calculation parameter, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
c:cosn | · | Rated Power Factor |
c:p | MW | Active Power (Electrical) |
c:rstr | p.u. | Stator Resistance |
c:xstr | p.u. | Stator Reactance |
c:rrtrA | p.u. | Rotor Resistance A |
c:rrtrB | p.u. | Rotor Resistance B |
c:xrtrA | p.u. | Rotor Reactance A |
c:xrtrB | p.u. | Rotor Reactance B |
c:xm | p.u. | Magnetising Reactance |
c:xmrtr | p.u. | Rotor Leakage Reactance |
c:frnom | Hz | Nominal Frequency |
c:i_mot | · | i_mot=0 |
c:Pmr | · | Amplification, Real Part |
c:Pmi | · | Amplification, Imaginary Part |
c:Unrot | kV | Rated Slip Ring Voltage |
c:psiM | p.u. | Magnetising flux |
c:ksat | · | Saturation factor |
c:xmsat | p.u. | Saturated magnetising reactance |
c:xmem | p.u. | Electrical Torque |
c:xmt | p.u. | Mechanical Torque |
c:slip | % | Slip |
c:tag | s | Acceleration Time Constant |
c:i_star | · | Star/Delta |
c:xss | p.u. | Subtransient Reactance |
c:addmt | p.u. | Additional Torque |
c:fe | p.u. | Electrical Frequency |
c:usr | p.u. | Rotor Voltage, Real Part |
c:usi | p.u. | Rotor Voltage, Imaginary Part |
c:urd | p.u. | Rotor Voltage, d-Axis |
c:urq | p.u. | Rotor Voltage, q-Axis |
c:ura | p.u. | Rotor Voltage, Phase a |
c:urb | p.u. | Rotor Voltage, Phase b |
c:urc | p.u. | Rotor Voltage, Phase c |
c:Ird | kA | Rotor Current, d-Axis |
c:Irq | kA | Rotor Current, q-Axis |
c:Ira | kA | Rotor Current, Phase a |
c:Irb | kA | Rotor Current, Phase b |
c:Irc | kA | Rotor Current, Phase c |
c:xradd | p.u. | Additional Rotor Reactance |
c:xstadd | p.u. | Additional Stator Reactance |
c:Irot | kA | Rotor Current, Magnitude of Phasor |
c:rcrow | · | Crow-Bar Resistance |
c:xcrow | · | Crow-Bar Reactance |
c:set_bypass | · | Set Rotor-Bypass |
c:reset_bypass | · | Reset Rotor-Bypass |
s:speed | p.u. | Speed |
s:psiA1_r | p.u. | Flux, Loop A, Real Part |
s:psiA1_i | p.u. | Flux, Loop A, Imaginary Part |
s:psiA2_r | p.u. | Flux, Loop A, Real Part |
s:psiA2_i | p.u. | Flux, Loop A, Imaginary Part |
s:psiB_r | p.u. | Flux, Loop B, Real Part |
s:psiB_i | p.u. | Flux, Loop B, Imaginary Part |
s:pt | p.u. | Turbine Power |
s:xmdm | p.u. | MDM-Torque |
s:rradd | p.u. | Additional Rotor Resistance |
s:xspeed | p.u. | Speed |
s:pgt | p.u. | Active power |
s:xme | p.u. | Electrical Torque |
s:Pmd | · | PWM Amplification, Real Part |
s:Pmq | · | PWM Amplification, Imaginary Part |
s:ird | p.u. | Rotor Current, d-Axis |
s:irq | p.u. | Rotor Current, q-Axis |
s:xphim | rad | Rotor Angle |
s:psis_r | p.u. | Stator Flux, Real Part |
s:psis_i | p.u. | Stator Flux, Imaginary Part |
s:cosphim | · | cos(phim) |
s:sinphim | · | sin(phim) |
s:psir_r | p.u. | Rotor Flux, Real Part |
s:psir_i | p.u. | Rotor Flux, Imaginary Part |
s:speedIn | p.u. | Speed input |
ElmAsmsc optimal power flow results
Read after ComOpf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1or :bus2 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1or :bus2 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1or :bus2 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1or :bus2 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1or :bus2 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1or :bus2 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1or :bus2 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1or :bus2 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1or :bus2 | p.u. | Current, Magnitude, referred to network |
m:I:bus1or :bus2 | kA | Current, Magnitude |
m:phii:bus1or :bus2 | deg | Current, Angle |
m:i1r:bus1or :bus2 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1or :bus2 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1or :bus2 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1or :bus2 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1or :bus2 | deg | Positive-Sequence Current, Angle |
m:P:bus1or :bus2 | MW | Active Power |
m:Q:bus1or :bus2 | Mvar | Reactive Power |
m:S:bus1or :bus2 | MVA | Apparent Power |
m:cosphi:bus1or :bus2 | · | Power Factor |
m:tanphi:bus1or :bus2 | · | tan(phi) |
m:Psum:bus1or :bus2 | MW | Total Active Power |
m:Qsum:bus1or :bus2 | Mvar | Total Reactive Power |
m:Ssum:bus1or :bus2 | MVA | Total Apparent Power |
m:cosphisum:bus1or :bus2 | · | Total Power Factor |
m:tanphisum:bus1or :bus2 | · | Total tan(phi) |
m:i1P:bus1or :bus2 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1or :bus2 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1or :bus2 | kA | Positive-Sequence Active Current |
m:I1Q:bus1or :bus2 | kA | Positive-Sequence Reactive Current |
m:ur:bus1or :bus2 | p.u. | Voltage, Real Part |
m:ui:bus1or :bus2 | p.u. | Voltage, Imaginary Part |
m:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
m:ir:bus1or :bus2 | p.u. | Current, Real Part |
m:ii:bus1or :bus2 | p.u. | Current, Imaginary Part |
m:i:bus1or :bus2 | p.u. | Current, Magnitude |
m:phiui:bus1or :bus2 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1or :bus2 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1or :bus2 | s | Fault Clearing Time |
m:Brkload:bus1or :bus2 | % | Breaker Loading |
m:Spu:bus1or :bus2 | MVA/p.u. | Apparent Power per p.u. Voltage |
c:cosn | · | Rated Power Factor |
c:p | MW | Active Power (Electrical) |
c:q | Mvar | Reactive Power |
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:Pnom | MW | Total Nominal Active power |
c:rstr | p.u. | Stator Resistance |
c:xstr | p.u. | Stator Reactance |
c:xrtrA | p.u. | Rotor Reactance A |
c:xrtrB | p.u. | Rotor Reactance B |
c:xm | p.u. | Magnetising Reactance |
c:xmrtr | p.u. | Rotor Leakage Reactance |
c:frnom | Hz | Nominal Frequency |
c:loading | % | Loading |
c:i_con | · | flag |
c:i_slip | · | flag |
c:slipn | % | Nominal Slip |
c:i_mot | · | i_mot=0 |
c:mk | · | Stalling Torque |
c:xme | p.u. | Electrical Torque |
c:i_cdisp | · | Current Displacement |
c:rrtrA0 | p.u. | RrA0 |
c:xrtrA0 | p.u. | XrA0 |
c:rr0 | p.u. | Rr0 |
c:xr0 | p.u. | Xr0 |
c:rr1 | p.u. | Rr1 |
c:xr1 | p.u. | Xr1 |
c:Pmr | · | Amplification, Real Part |
c:Pmi | · | Amplification, Imaginary Part |
c:Unrot | kV | Rated Slip Ring Voltage |
c:zonewscale | · | Wind generation zone scaling factor |
c:psiM | p.u. | Magnetising Flux |
c:ksat | · | Saturation Factor |
c:xmsat | p.u. | Saturated Magnetising Reactance |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
c:usr | p.u. | Slip-ring Voltage, Real Part |
c:usi | p.u. | Slip-ring Voltage, Imaginary Part |
n:ur:bus1or :bus2 | p.u. | Voltage, Real Part |
n:ui:bus1or :bus2 | p.u. | Voltage, Imaginary Part |
n:u:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:upc:bus1or :bus2 | % | Voltage, Magnitude |
n:du:bus1or :bus2 | % | Voltage Deviation |
n:U:bus1or :bus2 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1or :bus2 | deg | Voltage, Angle |
n:phiurel:bus1or :bus2 | deg | Voltage, Relative Angle |
n:Ul:bus1or :bus2 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1or :bus2 | p.u. | Voltage, Magnitude |
n:u1pc:bus1or :bus2 | % | Voltage, Magnitude |
n:u1r:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1or :bus2 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:bus1or :bus2 | MW | Generation, Active Power |
n:Qgen:bus1or :bus2 | Mvar | Generation, Reactive Power |
n:Pmot:bus1or :bus2 | MW | Motor Load, Active Power |
n:Qmot:bus1or :bus2 | Mvar | Motor Load, Reactive Power |
n:Pload:bus1or :bus2 | MW | General Load, Active Power |
n:Qload:bus1or :bus2 | Mvar | General Load, Reactive Power |
n:Pcomp:bus1or :bus2 | MW | Compensation (Losses) |
n:Qcomp:bus1or :bus2 | Mvar | Compensation |
n:Pnet:bus1or :bus2 | MW | External Networks, Active Power |
n:Qnet:bus1or :bus2 | Mvar | External Networks, Reactive Power |
n:Pflow:bus1or :bus2 | MW | Power Flow, Active Power |
n:Qflow:bus1or :bus2 | Mvar | Power Flow, Reactive Power |
n:Pout:bus1or :bus2 | MW | Outgoing Flow, Active Power |
n:Qout:bus1or :bus2 | Mvar | Outgoing Power, Reactive Power |
n:Sout:bus1or :bus2 | MVA | Outgoing Power, Apparent Power |
n:cosphiout:bus1or :bus2 | · | Outgoing Power, Power Factor |
n:Pbalance:bus1or :bus2 | MW | Active Power Balance (=0) |
n:Qbalance:bus1or :bus2 | Mvar | Reactive Power Balance (=0) |
n:LossPdown:bus1or :bus2 | MW | Losses, downstream |
n:LossQdown:bus1or :bus2 | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:bus1or :bus2 | MW | Load losses, downstream |
n:LossQdownload:bus1or :bus2 | Mvar | Load losses, downstream |
n:LossPdownnoload:bus1or :bus2 | MW | No load losses, downstream |
n:LossQdownnoload:bus1or :bus2 | Mvar | No load losses, downstream |
n:du_feed:bus1or :bus2 | % | Difference from voltage at start of feeder |
ElmAsmsc basic data
b: values are worked out from the input data. Read them; they are not set.
| Attribute | Unit | Description |
|---|---|---|
b:loc_name | · | Name |
b:i_mot | · | Motor |
b:iWindGen | · | Wind Generator |