ElmRecmono attributesPowerFactory Rectifier/Inverter/1 DC-Connection

Every attribute of the PowerFactory Rectifier/Inverter/1 DC-Connection (ElmRecmono): 137 input parameters and 941 result variables, with units and meaning. Copy a name into GetAttribute or SetAttribute.

What ElmRecmono is

A line-commutated rectifier or inverter with an AC terminal and one DC terminal.

Class: ElmRecmono, element class
PowerFactory name: Rectifier/Inverter/1 DC-Connection
Terminal suffix: :busac terminal ac, :busdc terminal dc
Attributes: 137 input parameters and 941 result variables, in 7 calculations

Read and write ElmRecmono in Python

import powerfactory

app = powerfactory.GetApplication()          # GetApplicationExt() from outside PowerFactory
app.GetFromStudyCase("ComLdf").Execute()      # results exist after a calculation

for obj in app.GetCalcRelevantObjects("*.ElmRecmono"):
    urnet_busac = obj.GetAttribute("m:urnet:busac") # Voltage, Real Part, referred to network, p.u.
    print(obj.loc_name, urnet_busac)

obj = app.GetCalcRelevantObjects("*.ElmRecmono")[0]
obj.SetAttribute("outserv", 1)                # take it out of service

A result at a terminal of the rectifier/inverter/1 dc-connection needs the terminal in its name: m:P:busac, not m:P, which raises AttributeError.
An input parameter is read and written with or without its e: prefix: GetAttribute("outserv") and GetAttribute("e:outserv") give the same value.
RMS and EMT variables change over time: record them in a results object (ElmRes) to read the whole curve. GetAttribute after a run gives the value at the last time step.

Input parameters137
Load flow results215
Short-circuit results248
RMS simulation results188
EMT simulation results110
DC load flow results24
Modal analysis results34
Optimal power flow results122
Basic data1

ElmRecmono input parameters

The element data, as typed in GetAttribute and SetAttribute (the e: prefix is optional). Setting one changes the model.

Attribute	Unit	Description
`loc_name`	·	Name
`chr_name`	·	Characteristic Name
`for_name`	·	Foreign Key
`dat_src`	·	Data source
`sernum`	·	Serial Number
`commissionDate`	·	Commissioning Date
`appr_modby`	·	Modified by
`mode`	·	Orientation (Rectifier/Inverter)
`bstp`	·	Control-Characteristic
`outserv`	·	Out of Service
`iZoneBus`	·	Zone
`iAreaBus`	·	Area
`constr`	·	Year of Construction
`appr_status`	·	Status
`ntrcn`	·	Tap-Changer
`ntrcnhvdc`	·	Tap-Changer
`ntrcnextrafo`	·	Tap-Changer
`alphacn`	·	Automatic Firing Angle Control
`iopt_hvdc`	·	HVDC LCC Control
`icurref`	·	Harmonic currents referred to
`i_int`	·	Harmonic spectrum
`maxorder`	·	Maximum Harmonic Order
`gammaMode`	·	Handling of extinction angle (gamma) during commutation failure
`psetloc`	·	at
`Bnum`	·	Number of bridges in series
`iExtCtrlNode`	·	HVDC connected at
`iAstabint`	·	A-stable integration algorithm
`gammaminCtrl`	·	Consider minimum extinction angle (gammamin)
`iHighDCCur`	·	Consider "High DC current mode"
`iPphidrp`	·	Angle difference dependent P-Droop
`considerPset`	·	Consider active power setpoint
`iPpart`	·	Active power participation
`iconfed`	·	Static converter-fed drive
`shcBlock`	·	Consider undervoltage blocking
`shcContrib`	·	Short-circuit current contribution
`iAcNetLoc`	·	AC Network Impedance Input
`iRecModel`	·	Power rectifier model
`uset`	p.u.	Voltage Setpoint
`Pset`	MW	Power-Setpoint
`Qset`	Mvar	Reactive Power-Setpoint
`Iset`	kA	Current Setpoint
`Xd`	Ohm	Commutation Reactance
`alpha_set`	deg	Actual Firing Angle
`gamma_set`	deg	Extinction Angle (gamma) Setpoint
`nntap`	p.u.	Actual tap position (p.u.)
`alphamin`	deg	Minimum Firing Angle
`alphamax`	deg	Maximum Firing Angle
`gammamin`	deg	Minimum Extinction Angle
`gammamax`	deg	Maximum Extinction Angle
`gammamindyn`	deg	Min. Extinction Angle for commutation failure
`nt2ag`	·	Phase Shift
`krelax`	·	Relaxation Factor
`dutap`	%	Add. voltage per tap
`udctapset`	p.u.	Vdc setpoint
`usetmin`	p.u.	Min. voltage setpoint
`usetmax`	p.u.	Max. voltage setpoint
`uminp`	p.u.	Min. voltage for power control
`Rdroop`	Ohm	Voltage control droop
`Im`	%	Current margin
`Rdce`	Ohm	Equiv. DC line resistance
`Kpphi`	MW/deg	Kpphi
`Kpart`	·	Participation factor
`volfac`	·	Voltage factor, c
`volfacmin`	·	Voltage factor, c
`comres`	Ohm	Resistance
`comrea`	Ohm	Reactance
`Racmin`	Ohm	AC Resistance
`Xacmin`	Ohm	AC Reactance
`Racmax`	Ohm	AC Resistance
`Xacmax`	Ohm	AC Reactance
`idcAmplFactor`	·	Transient current amplitude factor
`eda`	p.u.	Assumed rectifier terminal fault voltage
`GPSlat`	deg	Latitude / Northing
`GPSlon`	deg	Longitude / Easting
`uBlock`	p.u.	Undervoltage
`appr_modif`	·	Modified
`cimRdfId`	·	RDF ID
`desc`	·	Description
`fold_id`	·	In Folder
`typ_id`	·	TypeObject: TypRec
`busac`	·	Terminal ACObject: StaCubic
`busdc`	·	Terminal DCObject: StaCubic
`doc_id`	·	Additional Data
`pOwner`	·	OwnerObject: ElmOwner
`pOperator`	·	OperatorObject: ElmOperator
`pctrl`	·	ControllerObject: ElmRec,ElmRecmono
`phvdclcc`	·	Opposite side converterObject: ElmRec,ElmRecmono
`phmc`	·	Harmonic CurrentsObject: TypHmccur,TypHmcopcur
`p_exttransf`	·	External transformerObject: ElmTr?,ElmTrmult
`p_b1phiu`	·	Remote AC BusbarObject: ElmTerm*
`p_b2phiu`	·	Local AC BusbarObject: ElmTerm*
`p_pmeas`	·	P(AC) measured atObject: StaCubic*,ElmBoundary
`cpHeadFold`	·	Head Folder
`busac_bar`	·	Terminal AC
`busdc_bar`	·	Terminal DC
`cpGrid`	·	GridObject: ElmNet
`cpZone`	·	ZoneObject: ElmZone
`cpArea`	·	AreaObject: ElmArea
`cpFeed`	·	FeederObject: ElmFeeder
`ciDist`	·	Distance from infeed in number of buses
`ciLater`	·	Lateral Index
`ciDistRoot`	·	Distance from first infeed in number of buses
`ciDistAll`	·	Distance from infeed in number of buses including switches
`ciDistAllRoot`	·	Distance from first infeed in number of buses including switches
`cpOwner`	·	OwnerObject: ElmOwner
`cpOperator`	·	OperatorObject: ElmOperator
`cpBranch`	·	BranchObject: ElmBranch
`cpSite`	·	SiteObject: ElmSite
`cpSubstat`	·	SubstationObject: ElmSubstat,ElmTrfstat
`cpMeteostat`	·	Meteo StationObject: ElmMeteostat
`ciOutaged`	·	Planned Outage
`ciEnergized`	·	Energized
`ciEarthed`	·	Earthed
`cDisplayName`	·	Display Name
`cpSupplyTransformer`	·	Supplying TransformerObject: ElmTr?,ElmTrmult
`cpSupplyTrfStation`	·	Supplying Secondary SubstationObject: ElmTrfstat
`cpSupplySubstation`	·	Supplying SubstationObject: ElmSubstat
`gammaPrimeset`	deg	Commutation margin setpoint
`Inom`	kA	Nominal Current (AC)
`Inomdc`	kA	Nominal Current (DC)
`cTypHmc`	·	Type of harmonic sources
`Irated`	kA	Rated Current
`gammaPrimemin`	deg	Minimum commutation margin
`gammaPrimemax`	deg	Maximum commutation margin
`gammaPrimemindyn`	deg	Min. commutation margin for commutation failure
`gammaPrimeMode`	·	Handling of commutation margin (gamma_prime) during commutation failure
`c_pmod`	·	ModelObject: ElmComp
`qdslCtrl`	·	Quasi-Dynamic ModelObject: ElmQdsl
`gammaPrimeminCtrl`	deg	Consider minimum commutation margin (gammaPrimemin)
`PdcTot`	MW	Total power-setpoint
`ikssmin`	kA	Subtransient Short-Circuit Current
`rntxnmin`	·	R to X" Ratio
`ikssmax`	kA	Subtransient Short-Circuit Current
`rntxnmax`	·	R to X" Ratio
`snssmin`	MVA	Subtransient Short-Circuit Level
`snssmax`	MVA	Subtransient Short-Circuit Level
`chargerRating`	kA	Charger current rating

ElmRecmono load flow results

Read after ComLdf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).

Attribute	Unit	Description
`m:urnet:busac`or :busdc	p.u.	Voltage, Real Part, referred to network
`m:uinet:busac`or :busdc	p.u.	Voltage, Imaginary Part, referred to network
`m:u1r:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Real Part
`m:u1i:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Imaginary Part
`m:u1:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Magnitude
`m:U1:busac`or :busdc	kV	Line-Ground Positive-Sequence-Voltage, Magnitude
`m:U1l:busac`or :busdc	kV	Line-Line Positive-Sequence-Voltage, Magnitude
`m:phiu1:busac`or :busdc	deg	Positive-Sequence-Voltage, Angle
`m:irnet:busac`or :busdc	p.u.	Current, Real Part, referred to network
`m:iinet:busac`or :busdc	p.u.	Current, Imaginary Part, referred to network
`m:inet:busac`or :busdc	p.u.	Current, Magnitude, referred to network
`m:I:busac`or :busdc	kA	Current, Magnitude
`m:phii:busac`or :busdc	deg	Current, Angle
`m:i1r:busac`or :busdc	p.u.	Positive-Sequence Current, Real Part
`m:i1i:busac`or :busdc	p.u.	Positive-Sequence Current, Imaginary Part
`m:i1:busac`or :busdc	p.u.	Positive-Sequence Current, Magnitude
`m:I1:busac`or :busdc	kA	Positive-Sequence Current, Magnitude
`m:phii1:busac`or :busdc	deg	Positive-Sequence Current, Angle
`m:P:busac`or :busdc	MW	Active Power
`m:Q:busac`or :busdc	Mvar	Reactive Power
`m:S:busac`or :busdc	MVA	Apparent Power
`m:cosphi:busac`or :busdc	·	Power Factor
`m:tanphi:busac`or :busdc	·	tan(phi)
`m:Psum:busac`or :busdc	MW	Total Active Power
`m:Qsum:busac`or :busdc	Mvar	Total Reactive Power
`m:Ssum:busac`or :busdc	MVA	Total Apparent Power
`m:cosphisum:busac`or :busdc	·	Total Power Factor
`m:tanphisum:busac`or :busdc	·	Total tan(phi)
`m:i1P:busac`or :busdc	p.u.	Positive-Sequence Active Current
`m:i1Q:busac`or :busdc	p.u.	Positive-Sequence Reactive Current
`m:I1P:busac`or :busdc	kA	Positive-Sequence Active Current
`m:I1Q:busac`or :busdc	kA	Positive-Sequence Reactive Current
`m:ur:busac`or :busdc	p.u.	Voltage, Real Part
`m:ui:busac`or :busdc	p.u.	Voltage, Imaginary Part
`m:u:busac`or :busdc	p.u.	Voltage, Magnitude
`m:ir:busac`or :busdc	p.u.	Current, Real Part
`m:ii:busac`or :busdc	p.u.	Current, Imaginary Part
`m:i:busac`or :busdc	p.u.	Current, Magnitude
`m:phiui:busac`or :busdc	deg	Angle between Voltage and Current
`m:phiu1i1:busac`or :busdc	deg	Angle between Voltage and Current in positive sequence system
`m:Tfct:busac`or :busdc	s	Fault Clearing Time
`m:Brkload:busac`or :busdc	%	Breaker Loading
`m:Spu:busac`or :busdc	MVA/p.u.	Apparent Power per p.u. Voltage
`m:urnet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Real Part, referred to network
`m:uinet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Imaginary Part, referred to network
`m:u0:busac`or :busdc	p.u.	Zero-Sequence-Voltage, Magnitude
`m:phiu0:busac`or :busdc	deg	Zero-Sequence-Voltage, Angle
`m:u2:busac`or :busdc	p.u.	Negative-Sequence-Voltage, Magnitude
`m:phiu2:busac`or :busdc	deg	Negative-Sequence-Voltage, Angle
`m:irnet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Real Part, referred to network
`m:iinet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Imaginary Part, referred to network
`m:inet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Magnitude, referred to network
`m:I:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Phase Current, Magnitude
`m:phii:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Phase Current, Angle
`m:i0r:busac`or :busdc	p.u.	Zero-Sequence Current, Real Part
`m:i0i:busac`or :busdc	p.u.	Zero-Sequence Current, Imaginary Part
`m:i0:busac`or :busdc	p.u.	Zero-Sequence Current, Magnitude
`m:I0:busac`or :busdc	kA	Zero-Sequence Current, Magnitude
`m:I0x3:busac`or :busdc	kA	3*I0
`m:phii0:busac`or :busdc	deg	Zero-Sequence Current, Angle
`m:i2r:busac`or :busdc	p.u.	Negative-Sequence Current, Real Part
`m:i2i:busac`or :busdc	p.u.	Negative-Sequence Current, Imaginary Part
`m:i2:busac`or :busdc	p.u.	Negative-Sequence Current, Magnitude
`m:I2:busac`or :busdc	kA	Negative-Sequence Current, Magnitude
`m:phii2:busac`or :busdc	deg	Negative-Sequence Current, Angle
`m:ubfacI:busac`or :busdc	%	Current Unbalance Factor
`m:ubfacS:busac`or :busdc	%	Power Unbalance Factor
`m:P:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MW	Active Power
`m:Q:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Mvar	Reactive Power
`m:S:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MVA	Apparent Power
`m:cosphi:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	·	Power Factor
`m:tanphi:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	·	tan(phi)
`m:Pln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MW	Active Power (Line-Neutral)
`m:Qln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Mvar	Reactive Power (Line-Neutral)
`m:P1:busac`or :busdc	MW	Positive Sequence Active Power
`m:Q1:busac`or :busdc	Mvar	Positive Sequence Reactive Power
`m:P2:busac`or :busdc	MW	Negative Sequence Active Power
`m:Q2:busac`or :busdc	Mvar	Negative Sequence Reactive Power
`m:P0:busac`or :busdc	MW	Zero Sequence Active Power
`m:Q0:busac`or :busdc	Mvar	Zero Sequence Reactive Power
`m:i2P:busac`or :busdc	p.u.	Negative-Sequence Active Current
`m:i2Q:busac`or :busdc	p.u.	Negative-Sequence Reactive Current
`m:I2P:busac`or :busdc	kA	Negative-Sequence Active Current
`m:I2Q:busac`or :busdc	kA	Negative-Sequence Reactive Current
`m:ur:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Real Part
`m:ui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Imaginary Part
`m:u:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Magnitude
`m:ir:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Real Part
`m:ii:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Imaginary Part
`m:i:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Magnitude
`m:phiui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Angle between Voltage and Current
`m:phiu0i0:busac`or :busdc	deg	Angle between Voltage and Current in zero-sequence system
`m:phiu2i2:busac`or :busdc	deg	Angle between Voltage and Current in negative sequence system
`m:TfctPh:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	s	Fault Clearing Time
`m:BrkloadPh:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Breaker Loading
`c:uset`	p.u.	Voltage Setpoint for mode=V
`c:udctapset`	p.u.	Tap changer DC voltage setpoint
`c:Pset`	MW	Active Power Setpoint
`c:Qset`	Mvar	Reactive Power Setpoint
`c:Iset`	kA	Current Setpoint for mode=I
`c:Xd`	Ohm	Commutation Reactance
`c:mode`	·	R/I
`c:bstp`	·	Bustype
`c:alphamrd`	rad	Minimum Firing Angle Alpha
`c:alphaxrd`	rad	Maximum Firing Angle Alpha
`c:gammamrd`	rad	Minimum Firing Angle Gamma
`c:gammaxrd`	rad	Maximum Firing Angle Gamma
`c:tapmin`	·	Minimum Tap Position
`c:tapmax`	·	Maximum Tap Position
`c:i_mode`	·	Operation mode (1=on, 0=off)
`c:ntrcn`	·	Automatic Tap
`c:uDC`	p.u.	DC-Voltage
`c:ol`	rad	Overlap Angle
`c:alpha_0`	rad	Firing Angle Alpha (Setpoint)
`c:tap_0`	rad	Tap Position (Setpoint)
`c:alphacn`	·	Automatic Firing Angle Control
`c:alpha_deg`	deg	Firing Angle Alpha
`c:gamma_deg`	deg	Extinction Angle Gamma
`c:ol_deg`	deg	Overlap Angle
`c:gammaset`	rad	Extinction Angle (Gamma) Setpoint
`c:tapnm`	·	Nominal Turns-Ratio
`c:i_diode`	·	Diode-/Thyristor Converter
`c:DCPoleLosses`	MW	DC Pole Losses
`c:dphi`	deg	Measured angle difference
`c:Pmeas`	MW	Measured Active Power
`c:igammaminCtrl`	·	Consider minimum extinction angle (gammamin)
`c:nCtrlIter`	·	No. of CTRL-iterations
`c:UcPeak`	kV	Capacitor voltage (CCC), peak value
`c:alpha_prime`	deg	Firing margin (CCC)
`c:gamma_prime`	deg	Commutation margin (CCC)
`c:Ploss`	MW	Losses (total)
`c:Qloss`	Mvar	Reactive-Losses (total)
`c:Plossld`	MW	Losses (load)
`c:Qlossld`	Mvar	Reactive-Losses (load)
`c:Plossnld`	MW	Losses (no load)
`c:Qlossnld`	Mvar	Reactive-Losses (no load)
`c:phii`	rad	Conducting Angle
`n:ur:busac`or :busdc	p.u.	Voltage, Real Part
`n:ui:busac`or :busdc	p.u.	Voltage, Imaginary Part
`n:u:busac`or :busdc	p.u.	Voltage, Magnitude
`n:upc:busac`or :busdc	%	Voltage, Magnitude
`n:du:busac`or :busdc	%	Voltage Deviation
`n:U:busac`or :busdc	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac`or :busdc	deg	Voltage, Angle
`n:phiurel:busac`or :busdc	deg	Voltage, Relative Angle
`n:Ul:busac`or :busdc	kV	Line-Line Voltage, Magnitude
`n:u1:busac`or :busdc	p.u.	Voltage, Magnitude
`n:u1pc:busac`or :busdc	%	Voltage, Magnitude
`n:u1r:busac`or :busdc	p.u.	Positive-Sequence Voltage, Real Part
`n:u1i:busac`or :busdc	p.u.	Positive-Sequence Voltage, Imaginary Part
`n:Pgen:busac`or :busdc	MW	Generation, Active Power
`n:Qgen:busac`or :busdc	Mvar	Generation, Reactive Power
`n:Pmot:busac`or :busdc	MW	Motor Load, Active Power
`n:Qmot:busac`or :busdc	Mvar	Motor Load, Reactive Power
`n:Pload:busac`or :busdc	MW	General Load, Active Power
`n:Qload:busac`or :busdc	Mvar	General Load, Reactive Power
`n:Pcomp:busac`or :busdc	MW	Compensation (Losses)
`n:Qcomp:busac`or :busdc	Mvar	Compensation
`n:Pnet:busac`or :busdc	MW	External Networks, Active Power
`n:Qnet:busac`or :busdc	Mvar	External Networks, Reactive Power
`n:Pflow:busac`or :busdc	MW	Power Flow, Active Power
`n:Qflow:busac`or :busdc	Mvar	Power Flow, Reactive Power
`n:Pout:busac`or :busdc	MW	Outgoing Flow, Active Power
`n:Qout:busac`or :busdc	Mvar	Outgoing Power, Reactive Power
`n:Sout:busac`or :busdc	MVA	Outgoing Power, Apparent Power
`n:cosphiout:busac`or :busdc	·	Outgoing Power, Power Factor
`n:Pbalance:busac`or :busdc	MW	Active Power Balance (=0)
`n:Qbalance:busac`or :busdc	Mvar	Reactive Power Balance (=0)
`n:LossPdown:busac`or :busdc	MW	Losses, downstream
`n:LossQdown:busac`or :busdc	Mvar	Losses, downstream (Reactive Power)
`n:LossPdownload:busac`or :busdc	MW	Load losses, downstream
`n:LossQdownload:busac`or :busdc	Mvar	Load losses, downstream
`n:LossPdownnoload:busac`or :busdc	MW	No load losses, downstream
`n:LossQdownnoload:busac`or :busdc	Mvar	No load losses, downstream
`n:du_feed:busac`or :busdc	%	Difference from voltage at start of feeder
`n:ur:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Real Part
`n:ui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Imaginary Part
`n:u:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Magnitude
`n:upc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Line-Ground Voltage, Magnitude
`n:du:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Voltage Deviation
`n:U:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Ground Voltage, Angle
`n:ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Line Voltage, Magnitude
`n:ulpc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Line-Line Voltage, Magnitude
`n:Ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Line Voltage, Magnitude
`n:phiul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Line Voltage, Angle
`n:u0:busac`or :busdc	p.u.	Zero-Sequence Voltage, Magnitude
`n:U0:busac`or :busdc	kV	Zero-Sequence Voltage, Magnitude
`n:U0x3:busac`or :busdc	kV	3*U0
`n:phiu0:busac`or :busdc	deg	Zero-Sequence Voltage, Angle
`n:U1:busac`or :busdc	kV	Line-Ground Positive-Sequence Voltage, Magnitude
`n:phiu1:busac`or :busdc	deg	Positive-Sequence Voltage, Angle
`n:u2:busac`or :busdc	p.u.	Negative-Sequence Voltage, Magnitude
`n:U2:busac`or :busdc	kV	Line-Ground Negative-Sequence Voltage, Magnitude
`n:phiu2:busac`or :busdc	deg	Negative-Sequence Voltage, Angle
`n:U1l:busac`or :busdc	kV	Line-Line Positive-Sequence Voltage, Magnitude
`n:U2l:busac`or :busdc	kV	Line-Line Negative-Sequence Voltage, Magnitude
`n:uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Neutral Voltage, Magnitude
`n:Uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Neutral Voltage, Magnitude
`n:phiuln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Neutral Voltage, Angle
`n:un:busac`or :busdc	p.u.	Neutral-Ground Voltage, Magnitude
`n:Un:busac`or :busdc	kV	Neutral-Ground Voltage, Magnitude
`n:phiun:busac`or :busdc	deg	Neutral-Ground Voltage, Angle
`n:upht:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Technology dependent Voltage, Magnitude
`n:Upht:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Phase Technology dependent Voltage, Magnitude
`n:um:busac`or :busdc	p.u.	Average-Voltage, Magnitude
`n:Um:busac`or :busdc	kV	Average-Voltage, Magnitude
`n:uphtmin:busac`or :busdc	p.u.	Minimum of Phase Technology dependent Voltage, Magnitude
`n:uphtmax:busac`or :busdc	p.u.	Maximum of Phase Technology dependent Voltage, Magnitude
`n:ubfac:busac`or :busdc	%	Unbalance Factor
`s:tap`	·	Tap Position
`s:alpha`	rad	Firing Angle Alpha
`s:gamma`	rad	Extinction Angle Gamma
`s:pset`	MW	Power setpoint
`s:udcset`	p.u.	DC Voltage setpoint

ElmRecmono short-circuit results

Read after ComShc with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.

Attribute	Unit	Description
`m:I:busac`or :busdc	kA	Short-Circuit Current, Magnitude
`m:phii:busac`or :busdc	deg	Phase Current, Angle
`m:i1:busac`or :busdc	p.u.	Positive-Sequence Current, Magnitude
`m:I1:busac`or :busdc	kA	Positive-Sequence Current, Magnitude
`m:phii1:busac`or :busdc	deg	Positive-Sequence Current, Angle
`m:P:busac`or :busdc	MW	Active Power
`m:Q:busac`or :busdc	Mvar	Reactive Power
`m:i1P:busac`or :busdc	p.u.	Positive-Sequence Active Current
`m:i1Q:busac`or :busdc	p.u.	Positive-Sequence Reactive Current
`m:I1P:busac`or :busdc	kA	Positive-Sequence Active Current
`m:I1Q:busac`or :busdc	kA	Positive-Sequence Reactive Current
`m:phiui:busac`or :busdc	deg	Angle between Voltage and Current
`m:phiu1i1:busac`or :busdc	deg	Angle between Voltage and Current in Positive-Sequence System
`m:Tfct:busac`or :busdc	s	Fault Clearing Time
`m:Ikss:busac`or :busdc	kA	Initial Short-Circuit Current
`m:ikss:busac`or :busdc	p.u.	Initial Short-Circuit Current, Magnitude
`m:Skss:busac`or :busdc	MVA	Initial Short-Circuit Power
`m:ip:busac`or :busdc	kA	Peak Short-Circuit Current
`m:maxIkss:busac`or :busdc	kA	Max. Initial Short-Circuit Current
`m:maxip:busac`or :busdc	kA	Max. Peak Short-Circuit Current
`m:maxIth:busac`or :busdc	kA	Max. Thermal equivalent Short-Circuit Current
`m:maxIb:busac`or :busdc	kA	Max. Breaking Current
`m:R:busac`or :busdc	Ohm	Fault Impedance, Real Part
`m:X:busac`or :busdc	Ohm	Fault Impedance, Imaginary Part
`m:Z:busac`or :busdc	Ohm	Fault Impedance, Magnitude
`m:phiz:busac`or :busdc	deg	Fault Impedance, Angle
`m:Rs:busac`or :busdc	Ohm	Source Impedance, Real Part
`m:Xs:busac`or :busdc	Ohm	Source Impedance, Imaginary Part
`m:Zs:busac`or :busdc	Ohm	Source Impedance, Magnitude
`m:phizs:busac`or :busdc	deg	Source Impedance, Angle
`m:BrkIpload:busac`or :busdc	%	Breaker Loading (peak)
`m:Ib:busac`or :busdc	kA	Short-Circuit Breaking Current
`m:Sb:busac`or :busdc	MVA	Short-Circuit Breaking Power
`m:Ith:busac`or :busdc	kA	Thermal equivalent Short-Circuit Current
`m:zSbase:busac`or :busdc	p.u.	Fault Impedance, Magnitude
`m:XtoR:busac`or :busdc	·	X/R ratio
`m:cosphiui:busac`or :busdc	·	cosphi
`m:BrkIbload:busac`or :busdc	%	Breaker Loading (breaking)
`m:BrkmaxIb:busac`or :busdc	kA	Max. Breaking Current (breaker time)
`m:Ik:busac`or :busdc	kA	Steady-State Short-Circuit Current
`m:I:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Short-Circuit Current, Magnitude
`m:phii:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Phase Current, Angle
`m:I0:busac`or :busdc	kA	Zero-Sequence Current, Magnitude
`m:I0x3:busac`or :busdc	kA	3*I0
`m:phii0:busac`or :busdc	deg	Zero-Sequence Current, Angle
`m:I2:busac`or :busdc	kA	Negative-Sequence Current, Magnitude
`m:phii2:busac`or :busdc	deg	Negative-Sequence Current, Angle
`m:P:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MW	Active Power
`m:Q:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Mvar	Reactive Power
`m:Psum:busac`or :busdc	MW	Total Active Power
`m:Qsum:busac`or :busdc	Mvar	Total Reactive Power
`m:cosphisum:busac`or :busdc	·	Total Power Factor
`m:P2:busac`or :busdc	MW	P2
`m:Q2:busac`or :busdc	Mvar	Q2
`m:P0:busac`or :busdc	MW	P0
`m:phiui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Angle between Voltage and Current
`m:phiu0i0:busac`or :busdc	deg	Angle between Voltage and Current in Zero-Sequence System
`m:phiu2i2:busac`or :busdc	deg	Angle between Voltage and Current in Negative-Sequence System
`m:TfctPh:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	s	Fault Clearing Time
`m:Ikss:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Initial Short-Circuit Current
`m:ikss:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Initial Short-Circuit Current, Magnitude
`m:Skss:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MVA	Initial Short-Circuit Power
`m:Skssx3:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MVA	3*Initial Short-Circuit Power
`m:ip:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Peak Short-Circuit Current
`m:Z:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Fault Impedance, Magnitude
`m:phiz:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Fault Impedance, Angle
`m:Zl:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Line-Line Fault Impedance, Magnitude
`m:phizl:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Line Fault Impedance, Angle
`m:Z0:busac`or :busdc	Ohm	Zero-Sequence Fault Impedance, Magnitude
`m:phiz0:busac`or :busdc	deg	Zero-Sequence Fault Impedance, Angle
`m:z0Sbase:busac`or :busdc	p.u.	Zero-Sequence Fault Impedance, Magnitude
`m:cosphiu1i1:busac`or :busdc	·	Positive-Sequence cosphi
`m:I0x3watt:busac`or :busdc	kA	Earth-Fault Residual Current
`m:I0x3var:busac`or :busdc	kA	Capacitive Earth-Fault Current
`m:Q0cap:busac`or :busdc	Mvar	Q0 capacitive
`m:Rfrel:busac`or :busdc	Ohm	Relay Impedance, Real Part
`m:Xfrel:busac`or :busdc	Ohm	Relay Impedance, Imaginary Part
`m:Zfrel:busac`or :busdc	Ohm	Relay Impedance, Magnitude
`m:phizfrel:busac`or :busdc	deg	Relay Impedance, Angle
`m:Zf:busac`or :busdc	Ohm	Meas. Fault Impedance, Magnitude
`m:phizf:busac`or :busdc	deg	Meas. Fault Impedance, Angle
`c:i12`	p.u.	Current
`c:zc`	p.u.	Commutation impedance (for ANSI/IEEE, GE guide)
`c:i_abc`	p.u.	Currents
`n:ur:busac`or :busdc	p.u.	Voltage, Real Part
`n:ui:busac`or :busdc	p.u.	Voltage, Imaginary Part
`n:u:busac`or :busdc	p.u.	Voltage, Magnitude
`n:upc:busac`or :busdc	%	Voltage, Magnitude
`n:du:busac`or :busdc	%	Voltage Deviation
`n:U:busac`or :busdc	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac`or :busdc	deg	Voltage, Angle
`n:Ul:busac`or :busdc	kV	Line-Line Voltage, Magnitude
`n:u1:busac`or :busdc	p.u.	Voltage, Magnitude
`n:u1pc:busac`or :busdc	%	Voltage, Magnitude
`n:u1r:busac`or :busdc	p.u.	Positive-Sequence Voltage, Real Part
`n:u1i:busac`or :busdc	p.u.	Positive-Sequence Voltage, Imaginary Part
`n:Ikss:busac`or :busdc	kA	Initial Short-Circuit Current
`n:I:busac`or :busdc	kA	Short-Circuit Current
`n:phii:busac`or :busdc	deg	Phase Current, Angle
`n:Skss:busac`or :busdc	MVA	Initial Short-Circuit Power
`n:ip:busac`or :busdc	kA	Peak Short-Circuit Current
`n:Ib:busac`or :busdc	kA	Short-Circuit Breaking Current
`n:Sb:busac`or :busdc	MVA	Short-Circuit Breaking Power
`n:idc:busac`or :busdc	kA	Decaying Component
`n:Ith:busac`or :busdc	kA	Thermal equivalent Short-Circuit Current
`n:R1toX1:busac`or :busdc	·	R1/X1 ratio (Zk")
`n:X1toR1:busac`or :busdc	·	X1/R1 ratio (Zk")
`n:R:busac`or :busdc	Ohm	Short-Circuit Impedance, Real Part
`n:X:busac`or :busdc	Ohm	Short-Circuit Impedance, Imaginary Part
`n:Z:busac`or :busdc	Ohm	Short-Circuit Impedance, Magnitude
`n:phiz:busac`or :busdc	deg	Short-Circuit Impedance, Angle
`n:urpref:busac`or :busdc	p.u.	Pre-fault Voltage, Real Part
`n:uipref:busac`or :busdc	p.u.	Pre-fault Voltage, Imaginary Part
`n:upref:busac`or :busdc	p.u.	Pre-fault Voltage, Magnitude
`n:uprefpc:busac`or :busdc	%	Pre-fault Voltage, Magnitude
`n:Upref:busac`or :busdc	kV	Line-Ground Pre-fault Voltage, Magnitude
`n:Ulpref:busac`or :busdc	kV	Line-Line Pre-fault Voltage, Magnitude
`n:phiupref:busac`or :busdc	deg	Pre-fault Voltage, Angle
`n:phiui:busac`or :busdc	deg	Angle between Voltage and Current
`n:Ithload:busac`or :busdc	%	Loading, Thermal equivalent Current
`n:Ipload:busac`or :busdc	%	Loading, Peak Short-Circuit Current
`n:Ithrtk:busac`or :busdc	kA	Rated Short-Time Current (Tk)
`n:XtoR:busac`or :busdc	·	X/R ratio (peak)
`n:RtoX:busac`or :busdc	·	R/X ratio (peak)
`n:XtoR_b:busac`or :busdc	·	X/R ratio (dc)
`n:RtoX_b:busac`or :busdc	·	R/X ratio (dc)
`n:fctof_b:busac`or :busdc	·	Equivalent Frequency fc/f (dc)
`n:rSbase:busac`or :busdc	p.u.	Short-Circuit Impedance, Real Part
`n:xSbase:busac`or :busdc	p.u.	Short-Circuit Impedance, Imaginary Part
`n:zSbase:busac`or :busdc	p.u.	Short-Circuit Impedance, Magnitude
`n:Tn:busac`or :busdc	ms	Grid Time Constant
`n:Ik:busac`or :busdc	kA	Steady-State Short-Circuit Current
`n:cfac:busac`or :busdc	·	Voltage Factor
`n:Iasy:busac`or :busdc	kA	Asymmetrical Breaking Current
`n:ur:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Real Part
`n:ui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Imaginary Part
`n:u:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Magnitude
`n:upc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Line-Ground Voltage, Magnitude
`n:du:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Voltage Deviation
`n:U:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Ground Voltage, Angle
`n:ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Line Voltage, Magnitude
`n:ulpc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Line-Line Voltage, Magnitude
`n:Ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Line Voltage, Magnitude
`n:phiul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Line Voltage, Angle
`n:u0:busac`or :busdc	p.u.	Zero-Sequence Voltage, Magnitude
`n:U0:busac`or :busdc	kV	Zero-Sequence Voltage, Magnitude
`n:U0x3:busac`or :busdc	kV	3*U0
`n:phiu0:busac`or :busdc	deg	Zero-Sequence Voltage, Angle
`n:U1:busac`or :busdc	kV	Line-Ground Positive-Sequence Voltage, Magnitude
`n:phiu1:busac`or :busdc	deg	Positive-Sequence Voltage, Angle
`n:u2:busac`or :busdc	p.u.	Negative-Sequence Voltage, Magnitude
`n:U2:busac`or :busdc	kV	Line-Ground Negative-Sequence Voltage, Magnitude
`n:phiu2:busac`or :busdc	deg	Negative-Sequence Voltage, Angle
`n:U1l:busac`or :busdc	kV	Line-Line Positive-Sequence Voltage, Magnitude
`n:U2l:busac`or :busdc	kV	Line-Line Negative-Sequence Voltage, Magnitude
`n:uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Neutral Voltage, Magnitude
`n:Uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Neutral Voltage, Magnitude
`n:phiuln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Neutral Voltage, Angle
`n:un:busac`or :busdc	p.u.	Neutral-Ground Voltage, Magnitude
`n:Un:busac`or :busdc	kV	Neutral-Ground Voltage, Magnitude
`n:phiun:busac`or :busdc	deg	Neutral-Ground Voltage, Angle
`n:upht:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Technology dependent Voltage, Magnitude
`n:Upht:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Phase Technology dependent Voltage, Magnitude
`n:Ikss:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Initial Short-Circuit Current
`n:I:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Short-Circuit Current
`n:phii:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Phase Current, Angle
`n:Skss:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MVA	Initial Short-Circuit Power
`n:Skssx3:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MVA	3*Initial Short-Circuit Power
`n:ip:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Peak Short-Circuit Current
`n:Ib:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Short-Circuit Breaking Current
`n:Sb:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MVA	Short-Circuit Breaking Power
`n:Ith:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Thermal equivalent Short-Circuit Current
`n:Ithmax:busac`or :busdc	kA	Max. Thermal equivalent Short-Circuit Current
`n:R0:busac`or :busdc	Ohm	Zero-Sequence Impedance, Real Part
`n:X0:busac`or :busdc	Ohm	Zero-Sequence Impedance, Imaginary Part
`n:Z0:busac`or :busdc	Ohm	Zero-Sequence Impedance, Magnitude
`n:phiz0:busac`or :busdc	deg	Zero-Sequence Impedance, Angle
`n:r0Sbase:busac`or :busdc	p.u.	Zero-Sequence Impedance, Real Part
`n:x0Sbase:busac`or :busdc	p.u.	Zero-Sequence Impedance, Imaginary Part
`n:z0Sbase:busac`or :busdc	p.u.	Zero-Sequence Impedance, Magnitude
`n:R1:busac`or :busdc	Ohm	Positive-Sequence Impedance, Real Part
`n:X1:busac`or :busdc	Ohm	Positive-Sequence Impedance, Imaginary Part
`n:Z1:busac`or :busdc	Ohm	Positive-Sequence Impedance, Magnitude
`n:phiz1:busac`or :busdc	deg	Positive-Sequence Impedance, Angle
`n:r1Sbase:busac`or :busdc	p.u.	Positive-Sequence Impedance, Real Part
`n:x1Sbase:busac`or :busdc	p.u.	Positive-Sequence Impedance, Imaginary Part
`n:z1Sbase:busac`or :busdc	p.u.	Positive-Sequence Impedance, Magnitude
`n:R2:busac`or :busdc	Ohm	Negative-Sequence Impedance, Real Part
`n:X2:busac`or :busdc	Ohm	Negative-Sequence Impedance, Imaginary Part
`n:Z2:busac`or :busdc	Ohm	Negative-Sequence Impedance, Magnitude
`n:phiz2:busac`or :busdc	deg	Negative-Sequence Impedance, Angle
`n:r2Sbase:busac`or :busdc	p.u.	Negative-Sequence Impedance, Real Part
`n:x2Sbase:busac`or :busdc	p.u.	Negative-Sequence Impedance, Imaginary Part
`n:z2Sbase:busac`or :busdc	p.u.	Negative-Sequence Impedance, Magnitude
`n:R0toX0:busac`or :busdc	·	R0/X0 ratio (Zk")
`n:X0toR0:busac`or :busdc	·	X0/R0 ratio (Zk")
`n:R2toX2:busac`or :busdc	·	R2/X2 ratio (Zk")
`n:X2toR2:busac`or :busdc	·	X2/R2 ratio (Zk")
`n:R:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Resistance, Line-Ground
`n:X:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Reactance, Line-Ground
`n:Z:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Impedance, Line-Ground
`n:phiz:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Angle of Network Impedance, Line-Ground
`n:Rl:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Resistance, Line-Line
`n:Xl:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Reactance, Line-Line
`n:Zl:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Impedance, Line-Line
`n:phizl:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Angle of Network Impedance, Line-Line
`n:Rln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Resistance, Line-Neutral
`n:Xln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Reactance, Line-Neutral
`n:Zln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Ohm	Network Impedance, Line-Neutral
`n:phizln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Angle of Network Impedance, Line-Neutral
`n:Rn:busac`or :busdc	Ohm	Network Resistance, Neutral
`n:Xn:busac`or :busdc	Ohm	Network Reactance, Neutral
`n:Zn:busac`or :busdc	Ohm	Network Impedance, Neutral
`n:phizn:busac`or :busdc	deg	Angle of Network Impedance, Neutral
`n:eff:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	·	Earth Fault Factor
`n:X0toX1:busac`or :busdc	·	X0/X1
`n:In:busac`or :busdc	kA	Neutral Current, Magnitude
`n:phiin:busac`or :busdc	deg	Neutral Current, Angle
`n:I0:busac`or :busdc	kA	Zero-Sequence Current, Magnitude
`n:I0x3:busac`or :busdc	kA	3*I0
`n:phii0:busac`or :busdc	deg	Zero-Sequence Current, Angle
`n:I1:busac`or :busdc	kA	Positive-Sequence Current, Magnitude
`n:phii1:busac`or :busdc	deg	Positive-Sequence Current, Angle
`n:I2:busac`or :busdc	kA	Negative-Sequence Current, Magnitude
`n:phii2:busac`or :busdc	deg	Negative-Sequence Current, Angle
`n:urpref:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Pre-fault Voltage, Real Part
`n:uipref:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Pre-fault Voltage, Imaginary Part
`n:upref:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Pre-fault Voltage, Magnitude
`n:uprefpc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Pre-fault Voltage, Magnitude
`n:Upref:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Ground Pre-fault Voltage, Magnitude
`n:Ulpref:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Line Pre-fault Voltage, Magnitude
`n:phiupref:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Pre-fault Voltage, Angle
`n:phiui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Angle between Voltage and Current
`n:phiu1i1:busac`or :busdc	deg	Angle between Voltage and Current in positive sequence system
`n:phiu2i2:busac`or :busdc	deg	Angle between Voltage and Current in negative sequence system
`n:phiu0i0:busac`or :busdc	deg	Angle between Voltage and Current in zero-sequence system
`n:Ik:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Steady-State Short-Circuit Current
`n:in:busac`or :busdc	p.u.	Neutral Current, Magnitude
`n:i0r:busac`or :busdc	p.u.	Zero-Sequence Current, Real Part
`n:i0i:busac`or :busdc	p.u.	Zero-Sequence Current, Imaginary Part
`n:i0:busac`or :busdc	p.u.	Zero-Sequence Current, Magnitude
`n:i1r:busac`or :busdc	p.u.	Positive-Sequence Current, Real Part
`n:i1i:busac`or :busdc	p.u.	Positive-Sequence Current, Imaginary Part
`n:i1:busac`or :busdc	p.u.	Positive-Sequence Current, Magnitude
`n:i2r:busac`or :busdc	p.u.	Negative-Sequence Current, Real Part
`n:i2i:busac`or :busdc	p.u.	Negative-Sequence Current, Imaginary Part
`n:i2:busac`or :busdc	p.u.	Negative-Sequence Current, Magnitude

ElmRecmono rms simulation results

Read after ComInc (RMS) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).

Attribute	Unit	Description
`m:urnet:busac`or :busdc	p.u.	Voltage, Real Part, referred to network
`m:uinet:busac`or :busdc	p.u.	Voltage, Imaginary Part, referred to network
`m:u1r:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Real Part
`m:u1i:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Imaginary Part
`m:u1:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Magnitude
`m:U1:busac`or :busdc	kV	Line-Ground Positive-Sequence-Voltage, Magnitude
`m:U1l:busac`or :busdc	kV	Line-Line Positive-Sequence-Voltage, Magnitude
`m:phiu1:busac`or :busdc	deg	Positive-Sequence-Voltage, Angle
`m:irnet:busac`or :busdc	p.u.	Current, Real Part, referred to network
`m:iinet:busac`or :busdc	p.u.	Current, Imaginary Part, referred to network
`m:inet:busac`or :busdc	p.u.	Current, Magnitude, referred to network
`m:I:busac`or :busdc	kA	Current, Magnitude
`m:phii:busac`or :busdc	deg	Current, Angle
`m:i1r:busac`or :busdc	p.u.	Positive-Sequence Current, Real Part
`m:i1i:busac`or :busdc	p.u.	Positive-Sequence Current, Imaginary Part
`m:i1:busac`or :busdc	p.u.	Positive-Sequence Current, Magnitude
`m:I1:busac`or :busdc	kA	Positive-Sequence Current, Magnitude
`m:phii1:busac`or :busdc	deg	Positive-Sequence Current, Angle
`m:P:busac`or :busdc	MW	Active Power
`m:Q:busac`or :busdc	Mvar	Reactive Power
`m:S:busac`or :busdc	MVA	Apparent Power
`m:cosphi:busac`or :busdc	·	Power Factor
`m:tanphi:busac`or :busdc	·	tan(phi)
`m:Psum:busac`or :busdc	MW	Total Active Power
`m:Qsum:busac`or :busdc	Mvar	Total Reactive Power
`m:Ssum:busac`or :busdc	MVA	Total Apparent Power
`m:cosphisum:busac`or :busdc	·	Total Power Factor
`m:tanphisum:busac`or :busdc	·	Total tan(phi)
`m:i1P:busac`or :busdc	p.u.	Positive-Sequence Active Current
`m:i1Q:busac`or :busdc	p.u.	Positive-Sequence Reactive Current
`m:I1P:busac`or :busdc	kA	Positive-Sequence Active Current
`m:I1Q:busac`or :busdc	kA	Positive-Sequence Reactive Current
`m:ur:busac`or :busdc	p.u.	Voltage, Real Part
`m:ui:busac`or :busdc	p.u.	Voltage, Imaginary Part
`m:u:busac`or :busdc	p.u.	Voltage, Magnitude
`m:ir:busac`or :busdc	p.u.	Current, Real Part
`m:ii:busac`or :busdc	p.u.	Current, Imaginary Part
`m:i:busac`or :busdc	p.u.	Current, Magnitude
`m:phiui:busac`or :busdc	deg	Angle between Voltage and Current
`m:phiu1i1:busac`or :busdc	deg	Angle between Voltage and Current in positive sequence system
`m:Tfct:busac`or :busdc	s	Fault Clearing Time
`m:Brkload:busac`or :busdc	%	Breaker Loading
`m:Spu:busac`or :busdc	MVA/p.u.	Apparent Power per p.u. Voltage
`m:urnet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Real Part, referred to network
`m:uinet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Imaginary Part, referred to network
`m:u0:busac`or :busdc	p.u.	Zero-Sequence-Voltage, Magnitude
`m:phiu0:busac`or :busdc	deg	Zero-Sequence-Voltage, Angle
`m:u2:busac`or :busdc	p.u.	Negative-Sequence-Voltage, Magnitude
`m:phiu2:busac`or :busdc	deg	Negative-Sequence-Voltage, Angle
`m:irnet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Real Part
`m:iinet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Imaginary Part
`m:inet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Magnitude
`m:I:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Phase Current, Magnitude
`m:phii:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Phase Current, Angle
`m:i0r:busac`or :busdc	p.u.	Zero-Sequence Current, Real Part
`m:i0i:busac`or :busdc	p.u.	Zero-Sequence Current, Imaginary Part
`m:i0:busac`or :busdc	p.u.	Zero-Sequence Current, Magnitude
`m:I0:busac`or :busdc	kA	Zero-Sequence Current, Magnitude
`m:I0x3:busac`or :busdc	kA	3*I0
`m:phii0:busac`or :busdc	deg	Zero-Sequence Current, Angle
`m:i2r:busac`or :busdc	p.u.	Negative-Sequence Current, Real Part
`m:i2i:busac`or :busdc	p.u.	Negative-Sequence Current, Imaginary Part
`m:i2:busac`or :busdc	p.u.	Negative-Sequence Current, Magnitude
`m:I2:busac`or :busdc	kA	Negative-Sequence Current, Magnitude
`m:phii2:busac`or :busdc	deg	Negative-Sequence Current, Angle
`m:P:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MW	Active Power
`m:Q:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Mvar	Reactive Power
`m:S:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MVA	Apparent Power
`m:cosphi:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	·	Power Factor
`m:tanphi:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	·	tan(phi)
`m:Pln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MW	Active Power (Line-Neutral)
`m:Qln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	Mvar	Reactive Power (Line-Neutral)
`m:P1:busac`or :busdc	MW	Positive Sequence Active Power
`m:Q1:busac`or :busdc	Mvar	Positive Sequence Reactive Power
`m:P2:busac`or :busdc	MW	Negative Sequence Active Power
`m:Q2:busac`or :busdc	Mvar	Negative Sequence Reactive Power
`m:P0:busac`or :busdc	MW	Zero Sequence Active Power
`m:Q0:busac`or :busdc	Mvar	Zero Sequence Reactive Power
`m:i2P:busac`or :busdc	p.u.	Negative-Sequence Active Current
`m:i2Q:busac`or :busdc	p.u.	Negative-Sequence Reactive Current
`m:I2P:busac`or :busdc	kA	Negative-Sequence Active Current
`m:I2Q:busac`or :busdc	kA	Negative-Sequence Reactive Current
`m:ur:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Real Part
`m:ui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Imaginary Part
`m:u:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, Magnitude
`m:ir:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Real Part
`m:ii:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Imaginary Part
`m:i:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, Magnitude
`m:phiui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Angle between Voltage and Current
`m:phiu0i0:busac`or :busdc	deg	Angle between Voltage and Current in zero-sequence system
`m:phiu2i2:busac`or :busdc	deg	Angle between Voltage and Current in negative sequence system
`m:TfctPh:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	s	Fault Clearing Time
`m:BrkloadPh:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Breaker Loading
`c:Xd`	Ohm	Commutation Reactance
`c:mode`	·	Rectifier/Inverter
`c:alphamrd`	rad	Minimum Firing Angle Alpha
`c:alphaxrd`	rad	Maximum Firing Angle Alpha
`c:gammamrd`	rad	Minimum Firing Angle Gamma
`c:gammaxrd`	rad	Maximum Firing Angle Gamma
`c:tapmin`	·	Minimum Tap Position
`c:tapmax`	·	Maximum Tap Position
`c:alpha_deg`	deg	Firing Angle Alpha
`c:gamma_deg`	deg	Extinction Angle Gamma
`c:ol_deg`	deg	Overlap Angle
`c:tapnm`	·	Nominal Turns-Ratio
`c:i_diode`	·	Diode-/Thyristor Converter
`c:DCPoleLosses`	MW	DC Pole Losses
`c:UcPeak`	kV	Capacitor voltage (CCC), peak value
`c:alpha_prime`	deg	Firing margin (CCC)
`c:gamma_prime`	deg	Commutation margin (CCC)
`c:Unom`	kV	Nominal Voltage (AC)
`c:Pnom`	MW	Nominal Power
`c:frnom`	Hz	Nominal Frequency
`c:hpi`	rad/s	Nominal Angular Frequency
`c:imax`	p.u.	Current Limit
`c:block`	·	Flag
`c:clear`	·	Flag
`c:s_mode`	·	Set Operation mode (1=on, 0=off)
`c:c_mode`	·	Clear Operation mode (1=on, 0=off)
`c:phii`	rad	Conducting Angle
`n:ur:busac`or :busdc	p.u.	Voltage, Real Part
`n:ui:busac`or :busdc	p.u.	Voltage, Imaginary Part
`n:u:busac`or :busdc	p.u.	Voltage, Magnitude
`n:upc:busac`or :busdc	%	Voltage, Magnitude
`n:du:busac`or :busdc	%	Voltage Deviation
`n:U:busac`or :busdc	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac`or :busdc	deg	Voltage, Angle
`n:phiurel:busac`or :busdc	deg	Voltage, Relative Angle
`n:Ul:busac`or :busdc	kV	Line-Line Voltage, Magnitude
`n:u1:busac`or :busdc	p.u.	Voltage, Magnitude
`n:u1pc:busac`or :busdc	%	Voltage, Magnitude
`n:u1r:busac`or :busdc	p.u.	Positive-Sequence Voltage, Real Part
`n:u1i:busac`or :busdc	p.u.	Positive-Sequence Voltage, Imaginary Part
`n:ishc:busac`or :busdc	p.u.	Short-Circuit Current, magnitude
`n:Ishc:busac`or :busdc	kA	Short-Circuit Current, magnitude
`n:fe:busac`or :busdc	p.u.	Electrical Frequency
`n:dfehz:busac`or :busdc	Hz	Deviation of the El. Frequency
`n:fehz:busac`or :busdc	Hz	Electrical Frequency
`n:frnom:busac`or :busdc	Hz	Nominal Frequency
`n:ishcr:busac`or :busdc	p.u.	Short-Circuit Current, real
`n:ishci:busac`or :busdc	p.u.	Short-Circuit Current, imag
`n:dfedt:busac`or :busdc	p.u./s	Derivative of El. Frequency
`n:ur:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Real Part
`n:ui:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Imaginary Part
`n:u:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Ground Voltage, Magnitude
`n:upc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Line-Ground Voltage, Magnitude
`n:du:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Voltage Deviation
`n:U:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Ground Voltage, Angle
`n:ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Line Voltage, Magnitude
`n:ulpc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Line-Line Voltage, Magnitude
`n:Ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Line Voltage, Magnitude
`n:phiul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Line Voltage, Angle
`n:u0:busac`or :busdc	p.u.	Zero-Sequence Voltage, Magnitude
`n:U0:busac`or :busdc	kV	Zero-Sequence Voltage, Magnitude
`n:U0x3:busac`or :busdc	kV	3*U0
`n:phiu0:busac`or :busdc	deg	Zero-Sequence Voltage, Angle
`n:U1:busac`or :busdc	kV	Line-Ground Positive-Sequence Voltage, Magnitude
`n:phiu1:busac`or :busdc	deg	Positive-Sequence Voltage, Angle
`n:u2:busac`or :busdc	p.u.	Negative-Sequence Voltage, Magnitude
`n:U2:busac`or :busdc	kV	Line-Ground Negative-Sequence Voltage, Magnitude
`n:phiu2:busac`or :busdc	deg	Negative-Sequence Voltage, Angle
`n:U1l:busac`or :busdc	kV	Line-Line Positive-Sequence Voltage, Magnitude
`n:U2l:busac`or :busdc	kV	Line-Line Negative-Sequence Voltage, Magnitude
`n:uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Neutral Voltage, Magnitude
`n:Uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Neutral Voltage, Magnitude
`n:phiuln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	deg	Line-Neutral Voltage, Angle
`n:un:busac`or :busdc	p.u.	Neutral-Ground Voltage, Magnitude
`n:Un:busac`or :busdc	kV	Neutral-Ground Voltage, Magnitude
`n:phiun:busac`or :busdc	deg	Neutral-Ground Voltage, Angle
`n:upht:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Technology dependent Voltage, Magnitude
`n:Upht:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Phase Technology dependent Voltage, Magnitude
`n:um:busac`or :busdc	p.u.	Average-Voltage, Magnitude
`n:Um:busac`or :busdc	kV	Average-Voltage, Magnitude
`n:ishc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Short-Circuit Current, magnitude
`n:Ishc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Short-Circuit Current, magnitude
`n:inshc:busac`or :busdc	p.u.	Neutral Short-Circuit Current, magnitude
`n:Inshc:busac`or :busdc	kA	Neutral Short-Circuit Current, magnitude
`n:ishcr:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Short-Circuit Current, real
`n:ishci:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Short-Circuit Current, imag
`s:tap`	·	Tap Position
`s:alpha`	rad	Firing Angle Alpha
`s:gamma`	rad	Extinction Angle Gamma
`s:short_dc`	·	DC Bypass
`s:block_all`	·	AC Blocking
`s:gamma_min`	rad	Extinction Angle Gamma (Min. in one cycle)
`s:gamma_state`	·	Gamma State
`s:fref`	·	Reference Frequency

ElmRecmono emt simulation results

Read after ComInc (EMT) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).

Attribute	Unit	Description
`m:u0:busac`or :busdc	p.u.	Zero-Sequence-Voltage
`m:u1r:busac`or :busdc	p.u.	Voltage Phasor, Real Part
`m:u1i:busac`or :busdc	p.u.	Voltage Phasor, Imaginary Part
`m:u1:busac`or :busdc	p.u.	Voltage Phasor, Magnitude
`m:U1:busac`or :busdc	kV	Line-Ground Voltage Phasor, Magnitude
`m:U1l:busac`or :busdc	kV	Line-Line Voltage Phasor, Magnitude
`m:phiu1:busac`or :busdc	deg	Voltage Phasor, Angle
`m:inet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current, referred to network
`m:I:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Phase Current
`m:i0:busac`or :busdc	p.u.	Zero-Sequence Current
`m:I0:busac`or :busdc	kA	Zero-Sequence Current
`m:I0x3:busac`or :busdc	kA	3*I0
`m:i1r:busac`or :busdc	p.u.	Current Phasor, Real Part
`m:i1i:busac`or :busdc	p.u.	Current Phasor, Imaginary Part
`m:i1:busac`or :busdc	p.u.	Current Phasor, Magnitude
`m:I1:busac`or :busdc	kA	Current Phasor, Magnitude
`m:phii1:busac`or :busdc	deg	Current Phasor, Angle
`m:P:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	MW	Active Power
`m:Psum:busac`or :busdc	MW	Power-Phasor, Active Power
`m:Qsum:busac`or :busdc	Mvar	Power Phasor, Reactive Part
`m:Ssum:busac`or :busdc	MVA	Power Phasor, Apparent Power
`m:i1P:busac`or :busdc	p.u.	Current Phasor, Active Current
`m:i1Q:busac`or :busdc	p.u.	Current Phasor, Reactive Current
`m:I1P:busac`or :busdc	kA	Current Phasor, Active Current
`m:I1Q:busac`or :busdc	kA	Current Phasor, Reactive Current
`m:u:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage
`m:i:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Current
`m:phiu1i1:busac`or :busdc	deg	Angle between Voltage and Current Phasor
`m:Tfct:busac`or :busdc	s	Fault Clearing Time
`m:TfctPh:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	s	Fault Clearing Time
`m:unet:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage, referred to network
`m:cosphi1:busac`or :busdc	·	Power-Phasor, Power-Factor
`c:Xd`	Ohm	Commutation Reactance
`c:mode`	·	Rectifier/Inverter
`c:alphamrd`	rad	Minimum Firing Angle Alpha
`c:alphaxrd`	rad	Maximum Firing Angle Alpha
`c:gammamrd`	rad	Minimum Firing Angle Gamma
`c:gammaxrd`	rad	Maximum Firing Angle Gamma
`c:tapmin`	·	Minimum Tap Position
`c:tapmax`	·	Maximum Tap Position
`c:alpha_deg`	deg	Firing Angle Alpha
`c:gamma_deg`	deg	Extinction Angle Gamma
`c:ol_deg`	deg	Overlap Angle
`c:tapnm`	·	Nominal Turns-Ratio
`c:i_diode`	·	Diode-/Thyristor Converter
`c:Unom`	kV	Nominal Voltage (AC)
`c:Pnom`	MW	Nominal Power
`c:frnom`	Hz	Nominal Frequency
`c:hpi`	rad/s	Nominal Angular Frequency
`c:imax`	p.u.	Current Limit
`c:block`	·	Flag
`c:clear`	·	Flag
`c:s_mode`	·	Set Operation mode (1=on, 0=off)
`c:c_mode`	·	Clear Operation mode (1=on, 0=off)
`c:Gd`	S	Snubber Conductance
`c:Cd`	uF	Snubber Capacitance
`c:Goff`	S	Off-Conductance
`c:Imov:A`per phase :A, :B, :C, unbalanced only	kA	MOV current (CCC)
`n:u:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Phase Voltage
`n:upc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Phase Voltage
`n:U:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Phase Voltage
`n:ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Line Voltage
`n:ulpc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	%	Line-Line Voltage
`n:Ul:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Line Voltage
`n:u0:busac`or :busdc	p.u.	Zero-Sequence-Voltage
`n:U0:busac`or :busdc	kV	Zero-Sequence-Voltage
`n:U0x3:busac`or :busdc	kV	3*U0
`n:u1:busac`or :busdc	p.u.	Voltage Phasor, Magnitude
`n:u1pc:busac`or :busdc	%	Voltage Phasor, Magnitude
`n:u1r:busac`or :busdc	p.u.	Voltage Phasor, Real Part
`n:u1i:busac`or :busdc	p.u.	Voltage Phasor, Imaginary Part
`n:U1:busac`or :busdc	kV	Voltage Phasor, Magnitude
`n:phiu1:busac`or :busdc	deg	Voltage Phasor, Angle
`n:U1l:busac`or :busdc	kV	Line-Line Voltage Phasor, Magnitude
`n:uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Line-Neutral Voltage
`n:Uln:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kV	Line-Neutral Voltage
`n:un:busac`or :busdc	p.u.	Neutral-Ground Voltage
`n:Un:busac`or :busdc	kV	Neutral-Ground Voltage
`n:ishc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	p.u.	Short-Circuit Current
`n:Ishc:busac:A`or :busdc; per phase :A, :B, :C, unbalanced only	kA	Short-Circuit Current
`n:inshc:busac`or :busdc	p.u.	Neutral Short-Circuit Current, magnitude
`n:Inshc:busac`or :busdc	kA	Neutral Short-Circuit Current, magnitude
`n:fe:busac`or :busdc	p.u.	Electrical Frequency
`n:dfehz:busac`or :busdc	Hz	Deviation of the El. Frequency
`n:fehz:busac`or :busdc	Hz	Electrical Frequency
`n:frnom:busac`or :busdc	Hz	Nominal Frequency
`s:tap`	·	Tap Position
`s:alpha`	rad	Firing Angle Alpha
`s:gamma`	rad	Extinction Angle Gamma
`s:short_dc`	·	DC Bypass
`s:block_all`	·	AC Blocking
`s:gamma_min`	rad	Extinction Angle Gamma (Min. in one cycle)
`s:Fmeas`	Hz	Frequency
`s:Ip_A`	kA	Thyristor Current
`s:Ip_B`	kA	Thyristor Current
`s:Ip_C`	kA	Thyristor Current
`s:Im_A`	kA	Thyristor Current
`s:Im_B`	kA	Thyristor Current
`s:Im_C`	kA	Thyristor Current
`s:Upc_A`	kV	Capacitive Voltage, TpA
`s:Upc_B`	kV	Capacitive Voltage, TpB
`s:Upc_C`	kV	Capacitive Voltage, TpC
`s:Umc_A`	kV	Capacitive Voltage, TmA
`s:Umc_B`	kV	Capacitive Voltage, TmB
`s:Umc_C`	kV	Capacitive Voltage, TmC
`s:U0`	kV	Zero Sequence Voltage
`s:phiref`	rad	Reference angle
`s:Uc_A`	kV	Capacitor voltage (CCC), phase A
`s:Uc_B`	kV	Capacitor voltage (CCC), phase B
`s:Uc_C`	kV	Capacitor voltage (CCC), phase C

ElmRecmono dc load flow results

Read after ComLdf (DC) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.

Attribute	Unit	Description
`m:P:busac`or :busdc	MW	Active Power
`m:Q:busac`or :busdc	Mvar	Reactive Power
`c:Pset`	MW	Active Power Setpoint
`c:Iset`	kA	Current Setpoint for mode=I
`c:mode`	·	R/I
`c:bstp`	·	Bustype
`c:i_diode`	·	Diode-/Thyristor Converter
`c:dphi`	deg	Measured angle difference
`c:Pmeas`	MW	Measured Active Power
`c:Ploss`	MW	Losses (total)
`c:Qloss`	Mvar	Reactive-Losses (total)
`n:u:busac`or :busdc	p.u.	Voltage, Magnitude
`n:upc:busac`or :busdc	%	Voltage, Magnitude
`n:U:busac`or :busdc	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac`or :busdc	deg	Voltage, Angle
`n:phiurel:busac`or :busdc	deg	Voltage, Relative Angle
`n:Ul:busac`or :busdc	kV	Line-Line Voltage, Magnitude
`n:u1:busac`or :busdc	p.u.	Voltage, Magnitude
`n:Pgen:busac`or :busdc	MW	Generation, Active Power
`n:Pmot:busac`or :busdc	MW	Motor Load, Active Power
`n:Pload:busac`or :busdc	MW	General Load, Active Power
`n:Pcomp:busac`or :busdc	MW	Compensation (Losses)
`n:Pnet:busac`or :busdc	MW	External Networks, Active Power
`n:Pflow:busac`or :busdc	MW	Power Flow, Active Power

Read after ComMod with GetAttribute. c: calculation parameter, s: signal (state or model variable).

Attribute	Unit	Description
`c:Xd`	Ohm	Commutation Reactance
`c:mode`	·	Rectifier/Inverter
`c:alphamrd`	rad	Minimum Firing Angle Alpha
`c:alphaxrd`	rad	Maximum Firing Angle Alpha
`c:gammamrd`	rad	Minimum Firing Angle Gamma
`c:gammaxrd`	rad	Maximum Firing Angle Gamma
`c:tapmin`	·	Minimum Tap Position
`c:tapmax`	·	Maximum Tap Position
`c:alpha_deg`	deg	Firing Angle Alpha
`c:gamma_deg`	deg	Extinction Angle Gamma
`c:ol_deg`	deg	Overlap Angle
`c:tapnm`	·	Nominal Turns-Ratio
`c:i_diode`	·	Diode-/Thyristor Converter
`c:DCPoleLosses`	MW	DC Pole Losses
`c:UcPeak`	kV	Capacitor voltage (CCC), peak value
`c:alpha_prime`	deg	Firing margin (CCC)
`c:gamma_prime`	deg	Commutation margin (CCC)
`c:Unom`	kV	Nominal Voltage (AC)
`c:Pnom`	MW	Nominal Power
`c:frnom`	Hz	Nominal Frequency
`c:hpi`	rad/s	Nominal Angular Frequency
`c:imax`	p.u.	Current Limit
`c:block`	·	Flag
`c:clear`	·	Flag
`c:s_mode`	·	Set Operation mode (1=on, 0=off)
`c:c_mode`	·	Clear Operation mode (1=on, 0=off)
`s:tap`	·	Tap Position
`s:alpha`	rad	Firing Angle Alpha
`s:gamma`	rad	Extinction Angle Gamma
`s:short_dc`	·	DC Bypass
`s:block_all`	·	AC Blocking
`s:gamma_min`	rad	Extinction Angle Gamma (Min. in one cycle)
`s:gamma_state`	·	Gamma State
`s:fref`	·	Reference Frequency

ElmRecmono optimal power flow results

Read after ComOpf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.

Attribute	Unit	Description
`m:urnet:busac`or :busdc	p.u.	Voltage, Real Part, referred to network
`m:uinet:busac`or :busdc	p.u.	Voltage, Imaginary Part, referred to network
`m:u1r:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Real Part
`m:u1i:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Imaginary Part
`m:u1:busac`or :busdc	p.u.	Positive-Sequence-Voltage, Magnitude
`m:U1:busac`or :busdc	kV	Line-Ground Positive-Sequence-Voltage, Magnitude
`m:U1l:busac`or :busdc	kV	Line-Line Positive-Sequence-Voltage, Magnitude
`m:phiu1:busac`or :busdc	deg	Positive-Sequence-Voltage, Angle
`m:irnet:busac`or :busdc	p.u.	Current, Real Part, referred to network
`m:iinet:busac`or :busdc	p.u.	Current, Imaginary Part, referred to network
`m:inet:busac`or :busdc	p.u.	Current, Magnitude, referred to network
`m:I:busac`or :busdc	kA	Current, Magnitude
`m:phii:busac`or :busdc	deg	Current, Angle
`m:i1r:busac`or :busdc	p.u.	Positive-Sequence Current, Real Part
`m:i1i:busac`or :busdc	p.u.	Positive-Sequence Current, Imaginary Part
`m:i1:busac`or :busdc	p.u.	Positive-Sequence Current, Magnitude
`m:I1:busac`or :busdc	kA	Positive-Sequence Current, Magnitude
`m:phii1:busac`or :busdc	deg	Positive-Sequence Current, Angle
`m:P:busac`or :busdc	MW	Active Power
`m:Q:busac`or :busdc	Mvar	Reactive Power
`m:S:busac`or :busdc	MVA	Apparent Power
`m:cosphi:busac`or :busdc	·	Power Factor
`m:tanphi:busac`or :busdc	·	tan(phi)
`m:Psum:busac`or :busdc	MW	Total Active Power
`m:Qsum:busac`or :busdc	Mvar	Total Reactive Power
`m:Ssum:busac`or :busdc	MVA	Total Apparent Power
`m:cosphisum:busac`or :busdc	·	Total Power Factor
`m:tanphisum:busac`or :busdc	·	Total tan(phi)
`m:i1P:busac`or :busdc	p.u.	Positive-Sequence Active Current
`m:i1Q:busac`or :busdc	p.u.	Positive-Sequence Reactive Current
`m:I1P:busac`or :busdc	kA	Positive-Sequence Active Current
`m:I1Q:busac`or :busdc	kA	Positive-Sequence Reactive Current
`m:ur:busac`or :busdc	p.u.	Voltage, Real Part
`m:ui:busac`or :busdc	p.u.	Voltage, Imaginary Part
`m:u:busac`or :busdc	p.u.	Voltage, Magnitude
`m:ir:busac`or :busdc	p.u.	Current, Real Part
`m:ii:busac`or :busdc	p.u.	Current, Imaginary Part
`m:i:busac`or :busdc	p.u.	Current, Magnitude
`m:phiui:busac`or :busdc	deg	Angle between Voltage and Current
`m:phiu1i1:busac`or :busdc	deg	Angle between Voltage and Current in positive sequence system
`m:Tfct:busac`or :busdc	s	Fault Clearing Time
`m:Brkload:busac`or :busdc	%	Breaker Loading
`m:Spu:busac`or :busdc	MVA/p.u.	Apparent Power per p.u. Voltage
`c:uset`	p.u.	Voltage Setpoint for mode=V
`c:udctapset`	p.u.	Tap changer DC voltage setpoint
`c:Pset`	MW	Active Power Setpoint
`c:Qset`	Mvar	Reactive Power Setpoint
`c:Iset`	kA	Current Setpoint for mode=I
`c:Xd`	Ohm	Commutation Reactance
`c:mode`	·	R/I
`c:bstp`	·	Bustype
`c:alphamrd`	rad	Minimum Firing Angle Alpha
`c:alphaxrd`	rad	Maximum Firing Angle Alpha
`c:gammamrd`	rad	Minimum Firing Angle Gamma
`c:gammaxrd`	rad	Maximum Firing Angle Gamma
`c:tapmin`	·	Minimum Tap Position
`c:tapmax`	·	Maximum Tap Position
`c:i_mode`	·	Operation mode (1=on, 0=off)
`c:ntrcn`	·	Automatic Tap
`c:uDC`	p.u.	DC-Voltage
`c:ol`	rad	Overlap Angle
`c:alpha_0`	rad	Firing Angle Alpha (Setpoint)
`c:tap_0`	rad	Tap Position (Setpoint)
`c:alphacn`	·	Automatic Firing Angle Control
`c:alpha_deg`	deg	Firing Angle Alpha
`c:gamma_deg`	deg	Extinction Angle Gamma
`c:ol_deg`	deg	Overlap Angle
`c:gammaset`	rad	Extinction Angle (Gamma) Setpoint
`c:tapnm`	·	Nominal Turns-Ratio
`c:i_diode`	·	Diode-/Thyristor Converter
`c:DCPoleLosses`	MW	DC Pole Losses
`c:dphi`	deg	Measured angle difference
`c:Pmeas`	MW	Measured Active Power
`c:igammaminCtrl`	·	Consider minimum extinction angle (gammamin)
`c:nCtrlIter`	·	No. of CTRL-iterations
`c:UcPeak`	kV	Capacitor voltage (CCC), peak value
`c:alpha_prime`	deg	Firing margin (CCC)
`c:gamma_prime`	deg	Commutation margin (CCC)
`c:Ploss`	MW	Losses (total)
`c:Qloss`	Mvar	Reactive-Losses (total)
`c:Plossld`	MW	Losses (load)
`c:Qlossld`	Mvar	Reactive-Losses (load)
`c:Plossnld`	MW	Losses (no load)
`c:Qlossnld`	Mvar	Reactive-Losses (no load)
`n:ur:busac`or :busdc	p.u.	Voltage, Real Part
`n:ui:busac`or :busdc	p.u.	Voltage, Imaginary Part
`n:u:busac`or :busdc	p.u.	Voltage, Magnitude
`n:upc:busac`or :busdc	%	Voltage, Magnitude
`n:du:busac`or :busdc	%	Voltage Deviation
`n:U:busac`or :busdc	kV	Line-Ground Voltage, Magnitude
`n:phiu:busac`or :busdc	deg	Voltage, Angle
`n:phiurel:busac`or :busdc	deg	Voltage, Relative Angle
`n:Ul:busac`or :busdc	kV	Line-Line Voltage, Magnitude
`n:u1:busac`or :busdc	p.u.	Voltage, Magnitude
`n:u1pc:busac`or :busdc	%	Voltage, Magnitude
`n:u1r:busac`or :busdc	p.u.	Positive-Sequence Voltage, Real Part
`n:u1i:busac`or :busdc	p.u.	Positive-Sequence Voltage, Imaginary Part
`n:Pgen:busac`or :busdc	MW	Generation, Active Power
`n:Qgen:busac`or :busdc	Mvar	Generation, Reactive Power
`n:Pmot:busac`or :busdc	MW	Motor Load, Active Power
`n:Qmot:busac`or :busdc	Mvar	Motor Load, Reactive Power
`n:Pload:busac`or :busdc	MW	General Load, Active Power
`n:Qload:busac`or :busdc	Mvar	General Load, Reactive Power
`n:Pcomp:busac`or :busdc	MW	Compensation (Losses)
`n:Qcomp:busac`or :busdc	Mvar	Compensation
`n:Pnet:busac`or :busdc	MW	External Networks, Active Power
`n:Qnet:busac`or :busdc	Mvar	External Networks, Reactive Power
`n:Pflow:busac`or :busdc	MW	Power Flow, Active Power
`n:Qflow:busac`or :busdc	Mvar	Power Flow, Reactive Power
`n:Pout:busac`or :busdc	MW	Outgoing Flow, Active Power
`n:Qout:busac`or :busdc	Mvar	Outgoing Power, Reactive Power
`n:Sout:busac`or :busdc	MVA	Outgoing Power, Apparent Power
`n:cosphiout:busac`or :busdc	·	Outgoing Power, Power Factor
`n:Pbalance:busac`or :busdc	MW	Active Power Balance (=0)
`n:Qbalance:busac`or :busdc	Mvar	Reactive Power Balance (=0)
`n:LossPdown:busac`or :busdc	MW	Losses, downstream
`n:LossQdown:busac`or :busdc	Mvar	Losses, downstream (Reactive Power)
`n:LossPdownload:busac`or :busdc	MW	Load losses, downstream
`n:LossQdownload:busac`or :busdc	Mvar	Load losses, downstream
`n:LossPdownnoload:busac`or :busdc	MW	No load losses, downstream
`n:LossQdownnoload:busac`or :busdc	Mvar	No load losses, downstream
`n:du_feed:busac`or :busdc	%	Difference from voltage at start of feeder

ElmRecmono basic data

b: values are worked out from the input data. Read them; they are not set.

Attribute	Unit	Description
`b:loc_name`	·	Name

← ElmTrain Train · ElmVsc PWM Converter/2 DC-Connections →