ElmVsc attributesPowerFactory PWM Converter/2 DC-Connections
Every attribute of the PowerFactory PWM Converter/2 DC-Connections (ElmVsc): 265 input parameters and 1061 result variables, with units and meaning. Copy a name into GetAttribute or SetAttribute.
What ElmVsc is
A PWM voltage-source converter with an AC terminal and two DC terminals (DC+ and DC-), as in a VSC-HVDC station.
- Class
ElmVsc, element class- PowerFactory name
- PWM Converter/2 DC-Connections
- Terminal suffix
:busacterminal ac,:busdpterminal dc+,:busdmterminal dc-- Attributes
- 265 input parameters and 1061 result variables, in 7 calculations
Read and write ElmVsc in Python
import powerfactory
app = powerfactory.GetApplication() # GetApplicationExt() from outside PowerFactory
app.GetFromStudyCase("ComLdf").Execute() # results exist after a calculation
for obj in app.GetCalcRelevantObjects("*.ElmVsc"):
urnet_busac = obj.GetAttribute("m:urnet:busac") # Voltage, Real Part, referred to network, p.u.
print(obj.loc_name, urnet_busac)
obj = app.GetCalcRelevantObjects("*.ElmVsc")[0]
obj.SetAttribute("outserv", 1) # take the converter out of service- A result at a terminal of the pwm converter/2 dc-connections needs the terminal in its name:
m:P:busac, notm:P, which raisesAttributeError. - An input parameter is read and written with or without its
e:prefix:GetAttribute("outserv")andGetAttribute("e:outserv")give the same value. - RMS and EMT variables change over time: record them in a results object (
ElmRes) to read the whole curve.GetAttributeafter a run gives the value at the last time step.
- Input parameters265
- Load flow results211
- Short-circuit results249
- RMS simulation results206
- EMT simulation results192
- DC load flow results34
- Modal analysis results47
- Optimal power flow results122
- Basic data2
ElmVsc input parameters
The element data, as typed in GetAttribute and SetAttribute (the e: prefix is optional). Setting one changes the model.
| Attribute | Unit | Description |
|---|---|---|
loc_name | · | Name |
chr_name | · | Characteristic Name |
for_name | · | Foreign Key |
dat_src | · | Data source |
sernum | · | Serial Number |
manuf | · | Manufacturer |
commissionDate | · | Commissioning Date |
appr_modby | · | Modified by |
psutype | · | Power station unit type |
outserv | · | Out of Service |
iZoneBus | · | Zone |
iAreaBus | · | Area |
nparnum | · | parallel converters |
iQorient | · | Orientation |
iVacMax | · | Consider modulation index limit |
ctrlStruct | · | Control strategy |
iPphidrp | · | Angle difference dependent P-droop |
considerPset | · | Consider active power setpoint |
i_acdc | · | Control mode |
ivacdroop | · | AC-Voltage Droop |
pf_recap | · | Power factor |
idroop | · | DC-voltage dependent P-droop |
iPpart | · | Active power participation |
priority | · | Merit Order |
vsctype | · | Converter type |
iThiPWM | · | Third harmonic injection |
icurref | · | Harmonic currents referred to |
considerAddz0 | · | Additional zero sequence impedance |
i_mod | · | Modulation |
i_det | · | Model |
i_ctrl | · | Use integrated current controller |
iArmFilt | · | 2nd-Harmonic Filter |
mmcModel | · | MMC model |
NmmcSM | · | Number of submodules per arm |
mmcModType | · | Modulation |
iZarmDCside | · | Consider arm reactor on DC side |
iVIsource | · | Independent AC and DC voltage/current source model |
iShcModel | · | Short-circuit model |
shcDeadband | · | Voltage deadband |
constr | · | Year of Construction |
appr_status | · | Status |
iconfed | · | Static converter-fed drive |
iNoShcContr | · | No short-circuit contribution |
searchBlockTrf | · | Externally modelled unit transformer |
ictrltp | · | Model |
iAstabint | · | A-stable integration algorithm |
isOpfCtrlP | · | Active Power |
isOpfCtrlQ | · | Reactive Power |
isLimPminOPF | · | Min. |
isLimPmaxOPF | · | Max. |
isLimQminOPF | · | Min. |
isLimQmaxOPF | · | Max. |
isCtrlP | · | Active Power |
isCtrlQ | · | Reactive Power |
isLimPmin | · | Min. |
isLimPmax | · | Max. |
isLimQmin | · | Min. |
isLimQmax | · | Max. |
isCtrlFixedToLdfVal | · | Fix controls to Load Flow values |
ctrlUsageP | · | Active Power |
ctrlUsageQ | · | Reactive Power |
isConsCostOp_Q | · | Reactive power operating costs |
iInterPol_Q | · | Approximation |
polyDegree_Q | · | Polynomial degree |
discMethCostOp_Q | · | Piecewise linearisation for LP |
isConsCostsRedispatch | · | Additional active power redispatch costs |
consCostsRedispatchQ | · | Additional reactive power redispatch costs |
refValueQ | · | Reference value for redispatch costs |
refValueV | · | Reference value for redispatch costs |
Unom | kV | Rated AC-voltage |
Unomdc | kV | Rated DC-voltage (DC) |
Snom | MVA | Rated power |
usetp | p.u. | AC voltage |
usetpdc | p.u. | DC voltage |
phisetp | deg | AC voltage angle |
psetp | MW | Active power |
qsetp | Mvar | Reactive power |
Pmmax | · | Max. PWM factor |
Pmax_uc | MW | Max. |
Pmin_uc | MW | Min. |
Kpphi | MW/deg | Kpphi |
ddroop | % | Droop |
pmsetp | p.u. | PWM factor |
usp_max | p.u. | Max. voltage setpoint |
usp_min | p.u. | Min. voltage setpoint |
pfsetp | · | Power factor |
K | p.u./MW | K |
Kpf | MW/Hz | Prim. frequency bias |
Kpart | · | Participation factor |
r1hmc | p.u. | Resistance, r1h |
x1hmc | p.u. | Reactance, x1h |
r2hmc | p.u. | Resistance, r2h |
x2hmc | p.u. | Reactance, x2h |
r0hmc | p.u. | Resistance, r0h |
x0hmc | p.u. | Reactance, x0h |
P1hrm | MW | Active power |
Q1hrm | Mvar | Reactive power |
u1hrm | p.u. | Positive sequence voltage |
fmod | Hz | Modulation frequency |
Ron | Ohm | On-resistance |
Goff | uS | Off-conductance |
Cvalve | uF | Snubber capacitance |
Gvalve | S | Snubber conductance |
uk | % | Short circuit impedance |
Pcu | kW | Copper losses |
R0toR1 | · | R0/R1 ratio |
X0toX1 | · | X0/X1 ratio |
Pnold | kW | No-load losses |
swtLossFactor | kW/A | Switching loss factor |
resLossFactor | Ohm | Resistive loss factor |
Tdeadtime | us | Dead time |
Cdc | uF | Cell capacitor |
Xd | Ohm | Commutation reactance |
Kd | · | Kd |
Kq | · | Kq |
Td | s | Td |
Tq | s | Tq |
Rarm | Ohm | Resistance, Rarm |
Larm | mH | Inductance, Larm |
Lfilt | mH | Inductance, Lfilt |
Cfilt | uF | Capacitance, Cfilt |
mmcCmod | uF | Submodule capacitance |
mmcGcap | uS | Capacitor parallel conductance |
Rdon | Ohm | On-resistance |
Gdoff | uS | Off-conductance |
fmodMmc | Hz | Modulation frequency |
Rac | Ohm | AC resistance |
Lac | mH | AC inductance |
R0toR1ac | · | R0/R1 ratio |
X0toX1ac | · | X0/X1 ratio |
Rdc | Ohm | DC resistance |
Ldc | mH | DC inductance |
q_max | p.u. | Max. |
q_min | p.u. | Min. |
r0 | p.u. | Resistance, r0 |
x0 | p.u. | Reactance, x0 |
r2 | p.u. | Resistance, r2 |
x2 | p.u. | Reactance, x2 |
Ikss | kA | Subtransient short-circuit current |
Iks | kA | Transient short-circuit current |
rtox | · | R to X'' ratio |
Kfactor | · | K factor |
imax | p.u. | Max. current |
uDeadband | p.u. | Deadband |
r2shc | p.u. | Resistance, r2 |
x2shc | p.u. | Reactance, x2 |
smoothfac_Q | % | Smoothing Factor |
GPSlat | deg | Latitude / Northing |
GPSlon | deg | Longitude / Easting |
scaleQmin | % | Scaling factor (min.) |
scaleQmax | % | Scaling factor (max.) |
Ikss2PF | kA | Two-phase faults, Ik"2PF |
Ikss1PF | kA | Single-phase faults, Ik"1PF |
Ikss3PF | kA | Three-phase faults, Ik"3PF |
IkPFmax | kA | Maximum current |
IkPFmin | kA | Minimum current |
r2iec | p.u. | Resistance, r2 |
x2iec | p.u. | Reactance, x2 |
r0iec | p.u. | Resistance, r0 |
x0iec | p.u. | Reactance, x0 |
penaltyCosts | USD/MWh | Costs for active power deviation |
curativeLimP | MW | Max. curative active power deviation |
curativeLimQ | Mvar | Max. curative reactive power deviation |
curativeCosts | USD/MVAh | Costs for curative power deviation |
penaltyCosts_Q | USD/Mvarh | Penalty costs |
targetQ | Mvar | Q target value |
targetV | p.u. | Target voltage setpoint |
fixedCostsSetpChangeQ | USD | Fixed costs per setpoint deviation |
costRedispatchV | USD/p.u. | Costs for voltage setpoint deviation |
costRedispatchQ | USD/Mvarh | Costs for reactive power deviation |
appr_modif | · | Modified |
cpower_Q | Mvar | Power |
ccost_Q | USD/h | Costs |
vecBreakpointsQ | Mvar | Power |
cimRdfId | · | RDF ID |
desc | · | Description |
fold_id | · | In Folder |
busac | · | Terminal ACObject: StaCubic |
busdp | · | Terminal DC+Object: StaCubic |
busdm | · | Terminal DC-Object: StaCubic |
p_uctrl | · | Controlled node (AC)Object: ElmTerm*,StaBar* |
p_pctrl | · | Controlled flowObject: StaCubic,ElmBoundary |
p_b1phiu | · | Remote AC busbarObject: ElmTerm* |
p_b2phiu | · | Local AC busbarObject: ElmTerm* |
p_pmeas | · | P(AC) measured atObject: StaCubic*,ElmBoundary |
phmc | · | Harmonic injectionsObject: TypHmccur,TypHmcopcur |
phmcv | · | Harmonic voltagesObject: TypHmcvolt,TypHmcopvolt |
fcharr1 | ChaPol,ChaVec,ChaMat,ChaOpfreq | Frequency-dependence, r1h(f) |
fcharx1 | ChaPol,ChaVec,ChaMat,ChaOpfreq | Frequency-dependence, x1h(f) |
fcharr2 | ChaPol,ChaVec,ChaMat,ChaOpfreq | Frequency-dependence, r2h(f) |
fcharx2 | ChaPol,ChaVec,ChaMat,ChaOpfreq | Frequency-dependence, x2h(f) |
fcharr0 | ChaPol,ChaVec,ChaMat,ChaOpfreq | Frequency-dependence, r0h(f) |
fcharx0 | ChaPol,ChaVec,ChaMat,ChaOpfreq | Frequency-dependence, x0h(f) |
pFlicker | · | Flicker coefficientsObject: TypFlicker |
pSubModel | · | SubmodelObject: ElmSubmodel |
pQlimType | · | Capability curveObject: IntQlim |
doc_id | · | Additional Data |
pOwner | · | OwnerObject: ElmOwner |
pOperator | · | OperatorObject: ElmOperator |
cpHeadFold | · | Head Folder |
busac_bar | · | Terminal AC |
busdp_bar | · | Terminal DC+ |
busdm_bar | · | Terminal DC- |
cpGrid | · | GridObject: ElmNet |
cpZone | · | ZoneObject: ElmZone |
cpArea | · | AreaObject: ElmArea |
cpFeed | · | FeederObject: ElmFeeder |
ciDist | · | Distance from infeed in number of buses |
ciLater | · | Lateral Index |
ciDistRoot | · | Distance from first infeed in number of buses |
ciDistAll | · | Distance from infeed in number of buses including switches |
ciDistAllRoot | · | Distance from first infeed in number of buses including switches |
cpOwner | · | OwnerObject: ElmOwner |
cpOperator | · | OperatorObject: ElmOperator |
cpBranch | · | BranchObject: ElmBranch |
cpSite | · | SiteObject: ElmSite |
cpSubstat | · | SubstationObject: ElmSubstat,ElmTrfstat |
cpMeteostat | · | Meteo StationObject: ElmMeteostat |
ciOutaged | · | Planned Outage |
ciEnergized | · | Energized |
ciEarthed | · | Earthed |
cDisplayName | · | Display Name |
cpSupplyTransformer | · | Supplying TransformerObject: ElmTr?,ElmTrmult |
cpSupplyTrfStation | · | Supplying Secondary SubstationObject: ElmTrfstat |
cpSupplySubstation | · | Supplying SubstationObject: ElmSubstat |
cCategory | · | Category |
cSubCategory | · | Subcategory |
Inom | kA | Nominal Current (AC) |
Inomdc | kA | Nominal Current (DC) |
Pnom | MW | Pr(rated) |
P_max | MW | Max. |
c_pmod | · | ModelObject: ElmComp |
c_psecc | · | Ext. secondary controllerObject: ElmSecctrl |
c_pstac | · | External station controllerObject: ElmStactrl |
c_ppvmpp | · | MPPT controllerObject: ElmPvmpp |
qdslCtrl | · | Quasi-dynamic modelObject: ElmQdsl |
cTypHmc | · | Type of harmonic sources |
Irated | kA | Rated Current |
R1hmc | Ohm | Resistance, R1h |
X1hmc | Ohm | Reactance, X1h |
R2hmc | Ohm | Resistance, R2h |
X2hmc | Ohm | Reactance, X2h |
R0hmc | Ohm | Resistance, R0h |
X0hmc | Ohm | Reactance, X0h |
r1h | p.u. | Resistance, r1h |
x1h | p.u. | Reactance, x1h |
r2h | p.u. | Resistance, r2h |
x2h | p.u. | Reactance, x2h |
r0h | p.u. | Resistance, r0h |
x0h | p.u. | Reactance, x0h |
islandOperRMS | · | Enable operation if part of an isolated area |
islandOperEMT | · | Enable operation if part of an isolated area |
cLarm1 | mH | Inductance, Larm1 |
cQ_min | Mvar | Min. |
cQ_max | Mvar | Max. |
Qmin_a | Mvar | Qmin(act.) |
Qmax_a | Mvar | Qmax(act.) |
Skss | MVA | Subtransient short-circuit level |
Sks | MVA | Transient short-circuit level |
xtor | · | X'' to R ratio |
pblocktrf | · | Unit transformerObject: ElmTr2 |
cCurativeLimQ | p.u. | Max. curative reactive power deviation |
avgCostsUc_Q | USD/Mvarh | Average costs |
avgCostsUc_posQ | USD/Mvarh | Average costs (pos. range) |
avgCostsUc_negQ | USD/Mvarh | Average costs (neg. range) |
ElmVsc load flow results
Read after ComLdf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:busacor :busdp, :busdm | p.u. | Voltage, Real Part, referred to network |
m:uinet:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:busacor :busdp, :busdm | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:busacor :busdp, :busdm | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:busacor :busdp, :busdm | deg | Positive-Sequence-Voltage, Angle |
m:irnet:busacor :busdp, :busdm | p.u. | Current, Real Part, referred to network |
m:iinet:busacor :busdp, :busdm | p.u. | Current, Imaginary Part, referred to network |
m:inet:busacor :busdp, :busdm | p.u. | Current, Magnitude, referred to network |
m:I:busacor :busdp, :busdm | kA | Current, Magnitude |
m:phii:busacor :busdp, :busdm | deg | Current, Angle |
m:i1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Real Part |
m:i1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Magnitude |
m:I1:busacor :busdp, :busdm | kA | Positive-Sequence Current, Magnitude |
m:phii1:busacor :busdp, :busdm | deg | Positive-Sequence Current, Angle |
m:P:busacor :busdp, :busdm | MW | Active Power |
m:Q:busacor :busdp, :busdm | Mvar | Reactive Power |
m:S:busacor :busdp, :busdm | MVA | Apparent Power |
m:cosphi:busacor :busdp, :busdm | · | Power Factor |
m:tanphi:busacor :busdp, :busdm | · | tan(phi) |
m:Psum:busacor :busdp, :busdm | MW | Total Active Power |
m:Qsum:busacor :busdp, :busdm | Mvar | Total Reactive Power |
m:Ssum:busacor :busdp, :busdm | MVA | Total Apparent Power |
m:cosphisum:busacor :busdp, :busdm | · | Total Power Factor |
m:tanphisum:busacor :busdp, :busdm | · | Total tan(phi) |
m:i1P:busacor :busdp, :busdm | p.u. | Positive-Sequence Active Current |
m:i1Q:busacor :busdp, :busdm | p.u. | Positive-Sequence Reactive Current |
m:I1P:busacor :busdp, :busdm | kA | Positive-Sequence Active Current |
m:I1Q:busacor :busdp, :busdm | kA | Positive-Sequence Reactive Current |
m:ur:busacor :busdp, :busdm | p.u. | Voltage, Real Part |
m:ui:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part |
m:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
m:ir:busacor :busdp, :busdm | p.u. | Current, Real Part |
m:ii:busacor :busdp, :busdm | p.u. | Current, Imaginary Part |
m:i:busacor :busdp, :busdm | p.u. | Current, Magnitude |
m:phiui:busacor :busdp, :busdm | deg | Angle between Voltage and Current |
m:phiu1i1:busacor :busdp, :busdm | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:busacor :busdp, :busdm | s | Fault Clearing Time |
m:Brkload:busacor :busdp, :busdm | % | Breaker Loading |
m:Spu:busacor :busdp, :busdm | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:busacor :busdp, :busdm | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:busacor :busdp, :busdm | deg | Zero-Sequence-Voltage, Angle |
m:u2:busacor :busdp, :busdm | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:busacor :busdp, :busdm | deg | Negative-Sequence-Voltage, Angle |
m:irnet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part, referred to network |
m:iinet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part, referred to network |
m:inet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude, referred to network |
m:I:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Real Part |
m:i0i:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Magnitude |
m:I0:busacor :busdp, :busdm | kA | Zero-Sequence Current, Magnitude |
m:I0x3:busacor :busdp, :busdm | kA | 3*I0 |
m:phii0:busacor :busdp, :busdm | deg | Zero-Sequence Current, Angle |
m:i2r:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Real Part |
m:i2i:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Magnitude |
m:I2:busacor :busdp, :busdm | kA | Negative-Sequence Current, Magnitude |
m:phii2:busacor :busdp, :busdm | deg | Negative-Sequence Current, Angle |
m:ubfacI:busacor :busdp, :busdm | % | Current Unbalance Factor |
m:ubfacS:busacor :busdp, :busdm | % | Power Unbalance Factor |
m:P:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:busacor :busdp, :busdm | MW | Positive Sequence Active Power |
m:Q1:busacor :busdp, :busdm | Mvar | Positive Sequence Reactive Power |
m:P2:busacor :busdp, :busdm | MW | Negative Sequence Active Power |
m:Q2:busacor :busdp, :busdm | Mvar | Negative Sequence Reactive Power |
m:P0:busacor :busdp, :busdm | MW | Zero Sequence Active Power |
m:Q0:busacor :busdp, :busdm | Mvar | Zero Sequence Reactive Power |
m:i2P:busacor :busdp, :busdm | p.u. | Negative-Sequence Active Current |
m:i2Q:busacor :busdp, :busdm | p.u. | Negative-Sequence Reactive Current |
m:I2P:busacor :busdp, :busdm | kA | Negative-Sequence Active Current |
m:I2Q:busacor :busdp, :busdm | kA | Negative-Sequence Reactive Current |
m:ur:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:busacor :busdp, :busdm | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:busacor :busdp, :busdm | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:Pm | · | Pulse-modulation factor |
c:snomn | MVA | Total rated apparent power (nparnum*Snom) |
c:K0 | · | Vac/Vdc at PWM=1 |
c:DCPoleLosses | MW | DC pole losses |
c:Kq | p.u. | Reactive power participation |
c:i_acdc | · | Control mode |
c:uini | p.u. | Voltage setpoint |
c:uinidc | p.u. | Voltage setpoint (DC) |
c:pmsetp | · | PWM factor |
c:phisetp | deg | Initial Angle |
c:phirelref | rad | Relative reference angle |
c:i_mod | · | Modulation |
c:uDC | p.u. | DC-voltage |
c:pini | · | Active power setpoint |
c:qini | · | Reactive power setpoint |
c:Qmax | Mvar | Upper limit of reactive power |
c:Qmin | Mvar | Lower limit of reactive power |
c:Pmin | MW | Lower limit of active power |
c:Pmax | MW | Upper limit of active power |
c:i_qlim | · | Reactive power limited |
c:i_plim | · | Active power limited |
c:Kpf | MW/Hz | Frequency bias |
c:Kp | p.u. | Active power participation |
c:zonewscale | · | Wind generation zone scaling factor |
c:iRefElement | · | Reference element |
c:iPowerOn | · | Flag |
c:i_vlim | · | Voltage setpoint limit reached |
c:dphi | deg | Measured angle difference |
c:Pmeas | MW | Measured active power |
c:nCtrlIter | · | No. of CTRL-iterations |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
n:ur:busacor :busdp, :busdm | p.u. | Voltage, Real Part |
n:ui:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part |
n:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:upc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:du:busacor :busdp, :busdm | % | Voltage Deviation |
n:U:busacor :busdp, :busdm | kV | Line-Ground Voltage, Magnitude |
n:phiu:busacor :busdp, :busdm | deg | Voltage, Angle |
n:phiurel:busacor :busdp, :busdm | deg | Voltage, Relative Angle |
n:Ul:busacor :busdp, :busdm | kV | Line-Line Voltage, Magnitude |
n:u1:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:u1pc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:u1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:busacor :busdp, :busdm | MW | Generation, Active Power |
n:Qgen:busacor :busdp, :busdm | Mvar | Generation, Reactive Power |
n:Pmot:busacor :busdp, :busdm | MW | Motor Load, Active Power |
n:Qmot:busacor :busdp, :busdm | Mvar | Motor Load, Reactive Power |
n:Pload:busacor :busdp, :busdm | MW | General Load, Active Power |
n:Qload:busacor :busdp, :busdm | Mvar | General Load, Reactive Power |
n:Pcomp:busacor :busdp, :busdm | MW | Compensation (Losses) |
n:Qcomp:busacor :busdp, :busdm | Mvar | Compensation |
n:Pnet:busacor :busdp, :busdm | MW | External Networks, Active Power |
n:Qnet:busacor :busdp, :busdm | Mvar | External Networks, Reactive Power |
n:Pflow:busacor :busdp, :busdm | MW | Power Flow, Active Power |
n:Qflow:busacor :busdp, :busdm | Mvar | Power Flow, Reactive Power |
n:Pout:busacor :busdp, :busdm | MW | Outgoing Flow, Active Power |
n:Qout:busacor :busdp, :busdm | Mvar | Outgoing Power, Reactive Power |
n:Sout:busacor :busdp, :busdm | MVA | Outgoing Power, Apparent Power |
n:cosphiout:busacor :busdp, :busdm | · | Outgoing Power, Power Factor |
n:Pbalance:busacor :busdp, :busdm | MW | Active Power Balance (=0) |
n:Qbalance:busacor :busdp, :busdm | Mvar | Reactive Power Balance (=0) |
n:LossPdown:busacor :busdp, :busdm | MW | Losses, downstream |
n:LossQdown:busacor :busdp, :busdm | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:busacor :busdp, :busdm | MW | Load losses, downstream |
n:LossQdownload:busacor :busdp, :busdm | Mvar | Load losses, downstream |
n:LossPdownnoload:busacor :busdp, :busdm | MW | No load losses, downstream |
n:LossQdownnoload:busacor :busdp, :busdm | Mvar | No load losses, downstream |
n:du_feed:busacor :busdp, :busdm | % | Difference from voltage at start of feeder |
n:ur:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:busacor :busdp, :busdm | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:busacor :busdp, :busdm | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:busacor :busdp, :busdm | kV | 3*U0 |
n:phiu0:busacor :busdp, :busdm | deg | Zero-Sequence Voltage, Angle |
n:U1:busacor :busdp, :busdm | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:busacor :busdp, :busdm | deg | Positive-Sequence Voltage, Angle |
n:u2:busacor :busdp, :busdm | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:busacor :busdp, :busdm | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:busacor :busdp, :busdm | deg | Negative-Sequence Voltage, Angle |
n:U1l:busacor :busdp, :busdm | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:busacor :busdp, :busdm | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:busacor :busdp, :busdm | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:busacor :busdp, :busdm | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:busacor :busdp, :busdm | deg | Neutral-Ground Voltage, Angle |
n:upht:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:busacor :busdp, :busdm | p.u. | Average-Voltage, Magnitude |
n:Um:busacor :busdp, :busdm | kV | Average-Voltage, Magnitude |
n:uphtmin:busacor :busdp, :busdm | p.u. | Minimum of Phase Technology dependent Voltage, Magnitude |
n:uphtmax:busacor :busdp, :busdm | p.u. | Maximum of Phase Technology dependent Voltage, Magnitude |
n:ubfac:busacor :busdp, :busdm | % | Unbalance Factor |
s:pset | MW | Active power setpoint |
s:qset | Mvar | Reactive power setpoint |
s:udcset | p.u. | DC Voltage setpoint |
s:dFin | Hz | Frequency Deviation |
s:phiset | rad | Voltage Angle Setpoint |
s:i2r_set | p.u. | Negative sequence current setpoint, Real Part |
s:i2i_set | p.u. | Negative sequence current setpoint, Imaginary Part |
ElmVsc short-circuit results
Read after ComShc with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:I:busacor :busdp, :busdm | kA | Short-Circuit Current, Magnitude |
m:phii:busacor :busdp, :busdm | deg | Phase Current, Angle |
m:i1:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Magnitude |
m:I1:busacor :busdp, :busdm | kA | Positive-Sequence Current, Magnitude |
m:phii1:busacor :busdp, :busdm | deg | Positive-Sequence Current, Angle |
m:P:busacor :busdp, :busdm | MW | Active Power |
m:Q:busacor :busdp, :busdm | Mvar | Reactive Power |
m:i1P:busacor :busdp, :busdm | p.u. | Positive-Sequence Active Current |
m:i1Q:busacor :busdp, :busdm | p.u. | Positive-Sequence Reactive Current |
m:I1P:busacor :busdp, :busdm | kA | Positive-Sequence Active Current |
m:I1Q:busacor :busdp, :busdm | kA | Positive-Sequence Reactive Current |
m:phiui:busacor :busdp, :busdm | deg | Angle between Voltage and Current |
m:phiu1i1:busacor :busdp, :busdm | deg | Angle between Voltage and Current in Positive-Sequence System |
m:Tfct:busacor :busdp, :busdm | s | Fault Clearing Time |
m:Ikss:busacor :busdp, :busdm | kA | Initial Short-Circuit Current |
m:ikss:busacor :busdp, :busdm | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:busacor :busdp, :busdm | MVA | Initial Short-Circuit Power |
m:ip:busacor :busdp, :busdm | kA | Peak Short-Circuit Current |
m:maxIkss:busacor :busdp, :busdm | kA | Max. Initial Short-Circuit Current |
m:maxip:busacor :busdp, :busdm | kA | Max. Peak Short-Circuit Current |
m:maxIth:busacor :busdp, :busdm | kA | Max. Thermal equivalent Short-Circuit Current |
m:maxIb:busacor :busdp, :busdm | kA | Max. Breaking Current |
m:R:busacor :busdp, :busdm | Ohm | Fault Impedance, Real Part |
m:X:busacor :busdp, :busdm | Ohm | Fault Impedance, Imaginary Part |
m:Z:busacor :busdp, :busdm | Ohm | Fault Impedance, Magnitude |
m:phiz:busacor :busdp, :busdm | deg | Fault Impedance, Angle |
m:Rs:busacor :busdp, :busdm | Ohm | Source Impedance, Real Part |
m:Xs:busacor :busdp, :busdm | Ohm | Source Impedance, Imaginary Part |
m:Zs:busacor :busdp, :busdm | Ohm | Source Impedance, Magnitude |
m:phizs:busacor :busdp, :busdm | deg | Source Impedance, Angle |
m:BrkIpload:busacor :busdp, :busdm | % | Breaker Loading (peak) |
m:Ib:busacor :busdp, :busdm | kA | Short-Circuit Breaking Current |
m:Sb:busacor :busdp, :busdm | MVA | Short-Circuit Breaking Power |
m:Ith:busacor :busdp, :busdm | kA | Thermal equivalent Short-Circuit Current |
m:zSbase:busacor :busdp, :busdm | p.u. | Fault Impedance, Magnitude |
m:XtoR:busacor :busdp, :busdm | · | X/R ratio |
m:cosphiui:busacor :busdp, :busdm | · | cosphi |
m:BrkIbload:busacor :busdp, :busdm | % | Breaker Loading (breaking) |
m:BrkmaxIb:busacor :busdp, :busdm | kA | Max. Breaking Current (breaker time) |
m:Ik:busacor :busdp, :busdm | kA | Steady-State Short-Circuit Current |
m:I:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, Magnitude |
m:phii:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:I0:busacor :busdp, :busdm | kA | Zero-Sequence Current, Magnitude |
m:I0x3:busacor :busdp, :busdm | kA | 3*I0 |
m:phii0:busacor :busdp, :busdm | deg | Zero-Sequence Current, Angle |
m:I2:busacor :busdp, :busdm | kA | Negative-Sequence Current, Magnitude |
m:phii2:busacor :busdp, :busdm | deg | Negative-Sequence Current, Angle |
m:P:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:Psum:busacor :busdp, :busdm | MW | Total Active Power |
m:Qsum:busacor :busdp, :busdm | Mvar | Total Reactive Power |
m:cosphisum:busacor :busdp, :busdm | · | Total Power Factor |
m:P2:busacor :busdp, :busdm | MW | P2 |
m:Q2:busacor :busdp, :busdm | Mvar | Q2 |
m:P0:busacor :busdp, :busdm | MW | P0 |
m:phiui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:busacor :busdp, :busdm | deg | Angle between Voltage and Current in Zero-Sequence System |
m:phiu2i2:busacor :busdp, :busdm | deg | Angle between Voltage and Current in Negative-Sequence System |
m:TfctPh:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:Ikss:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
m:ikss:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
m:Skssx3:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
m:ip:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
m:Z:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Fault Impedance, Magnitude |
m:phiz:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Fault Impedance, Angle |
m:Zl:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Line-Line Fault Impedance, Magnitude |
m:phizl:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Line Fault Impedance, Angle |
m:Z0:busacor :busdp, :busdm | Ohm | Zero-Sequence Fault Impedance, Magnitude |
m:phiz0:busacor :busdp, :busdm | deg | Zero-Sequence Fault Impedance, Angle |
m:z0Sbase:busacor :busdp, :busdm | p.u. | Zero-Sequence Fault Impedance, Magnitude |
m:cosphiu1i1:busacor :busdp, :busdm | · | Positive-Sequence cosphi |
m:I0x3watt:busacor :busdp, :busdm | kA | Earth-Fault Residual Current |
m:I0x3var:busacor :busdp, :busdm | kA | Capacitive Earth-Fault Current |
m:Q0cap:busacor :busdp, :busdm | Mvar | Q0 capacitive |
m:Rfrel:busacor :busdp, :busdm | Ohm | Relay Impedance, Real Part |
m:Xfrel:busacor :busdp, :busdm | Ohm | Relay Impedance, Imaginary Part |
m:Zfrel:busacor :busdp, :busdm | Ohm | Relay Impedance, Magnitude |
m:phizfrel:busacor :busdp, :busdm | deg | Relay Impedance, Angle |
m:Zf:busacor :busdp, :busdm | Ohm | Meas. Fault Impedance, Magnitude |
m:phizf:busacor :busdp, :busdm | deg | Meas. Fault Impedance, Angle |
c:imax | p.u. | Max. current |
c:z2 | p.u. | Negative sequence impedance |
c:z0 | p.u. | Zero sequence impedance |
c:z1 | p.u. | Subtransient impedance |
n:ur:busacor :busdp, :busdm | p.u. | Voltage, Real Part |
n:ui:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part |
n:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:upc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:du:busacor :busdp, :busdm | % | Voltage Deviation |
n:U:busacor :busdp, :busdm | kV | Line-Ground Voltage, Magnitude |
n:phiu:busacor :busdp, :busdm | deg | Voltage, Angle |
n:Ul:busacor :busdp, :busdm | kV | Line-Line Voltage, Magnitude |
n:u1:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:u1pc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:u1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Ikss:busacor :busdp, :busdm | kA | Initial Short-Circuit Current |
n:I:busacor :busdp, :busdm | kA | Short-Circuit Current |
n:phii:busacor :busdp, :busdm | deg | Phase Current, Angle |
n:Skss:busacor :busdp, :busdm | MVA | Initial Short-Circuit Power |
n:ip:busacor :busdp, :busdm | kA | Peak Short-Circuit Current |
n:Ib:busacor :busdp, :busdm | kA | Short-Circuit Breaking Current |
n:Sb:busacor :busdp, :busdm | MVA | Short-Circuit Breaking Power |
n:idc:busacor :busdp, :busdm | kA | Decaying Component |
n:Ith:busacor :busdp, :busdm | kA | Thermal equivalent Short-Circuit Current |
n:R1toX1:busacor :busdp, :busdm | · | R1/X1 ratio (Zk") |
n:X1toR1:busacor :busdp, :busdm | · | X1/R1 ratio (Zk") |
n:R:busacor :busdp, :busdm | Ohm | Short-Circuit Impedance, Real Part |
n:X:busacor :busdp, :busdm | Ohm | Short-Circuit Impedance, Imaginary Part |
n:Z:busacor :busdp, :busdm | Ohm | Short-Circuit Impedance, Magnitude |
n:phiz:busacor :busdp, :busdm | deg | Short-Circuit Impedance, Angle |
n:urpref:busacor :busdp, :busdm | p.u. | Pre-fault Voltage, Real Part |
n:uipref:busacor :busdp, :busdm | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:busacor :busdp, :busdm | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:busacor :busdp, :busdm | % | Pre-fault Voltage, Magnitude |
n:Upref:busacor :busdp, :busdm | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:busacor :busdp, :busdm | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:busacor :busdp, :busdm | deg | Pre-fault Voltage, Angle |
n:phiui:busacor :busdp, :busdm | deg | Angle between Voltage and Current |
n:Ithload:busacor :busdp, :busdm | % | Loading, Thermal equivalent Current |
n:Ipload:busacor :busdp, :busdm | % | Loading, Peak Short-Circuit Current |
n:Ithrtk:busacor :busdp, :busdm | kA | Rated Short-Time Current (Tk) |
n:XtoR:busacor :busdp, :busdm | · | X/R ratio (peak) |
n:RtoX:busacor :busdp, :busdm | · | R/X ratio (peak) |
n:XtoR_b:busacor :busdp, :busdm | · | X/R ratio (dc) |
n:RtoX_b:busacor :busdp, :busdm | · | R/X ratio (dc) |
n:fctof_b:busacor :busdp, :busdm | · | Equivalent Frequency fc/f (dc) |
n:rSbase:busacor :busdp, :busdm | p.u. | Short-Circuit Impedance, Real Part |
n:xSbase:busacor :busdp, :busdm | p.u. | Short-Circuit Impedance, Imaginary Part |
n:zSbase:busacor :busdp, :busdm | p.u. | Short-Circuit Impedance, Magnitude |
n:Tn:busacor :busdp, :busdm | ms | Grid Time Constant |
n:Ik:busacor :busdp, :busdm | kA | Steady-State Short-Circuit Current |
n:cfac:busacor :busdp, :busdm | · | Voltage Factor |
n:Iasy:busacor :busdp, :busdm | kA | Asymmetrical Breaking Current |
n:ur:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:busacor :busdp, :busdm | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:busacor :busdp, :busdm | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:busacor :busdp, :busdm | kV | 3*U0 |
n:phiu0:busacor :busdp, :busdm | deg | Zero-Sequence Voltage, Angle |
n:U1:busacor :busdp, :busdm | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:busacor :busdp, :busdm | deg | Positive-Sequence Voltage, Angle |
n:u2:busacor :busdp, :busdm | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:busacor :busdp, :busdm | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:busacor :busdp, :busdm | deg | Negative-Sequence Voltage, Angle |
n:U1l:busacor :busdp, :busdm | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:busacor :busdp, :busdm | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:busacor :busdp, :busdm | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:busacor :busdp, :busdm | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:busacor :busdp, :busdm | deg | Neutral-Ground Voltage, Angle |
n:upht:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:Ikss:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
n:I:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:phii:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
n:Skss:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
n:Skssx3:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
n:ip:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
n:Ib:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Breaking Current |
n:Sb:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MVA | Short-Circuit Breaking Power |
n:Ith:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Thermal equivalent Short-Circuit Current |
n:Ithmax:busacor :busdp, :busdm | kA | Max. Thermal equivalent Short-Circuit Current |
n:R0:busacor :busdp, :busdm | Ohm | Zero-Sequence Impedance, Real Part |
n:X0:busacor :busdp, :busdm | Ohm | Zero-Sequence Impedance, Imaginary Part |
n:Z0:busacor :busdp, :busdm | Ohm | Zero-Sequence Impedance, Magnitude |
n:phiz0:busacor :busdp, :busdm | deg | Zero-Sequence Impedance, Angle |
n:r0Sbase:busacor :busdp, :busdm | p.u. | Zero-Sequence Impedance, Real Part |
n:x0Sbase:busacor :busdp, :busdm | p.u. | Zero-Sequence Impedance, Imaginary Part |
n:z0Sbase:busacor :busdp, :busdm | p.u. | Zero-Sequence Impedance, Magnitude |
n:R1:busacor :busdp, :busdm | Ohm | Positive-Sequence Impedance, Real Part |
n:X1:busacor :busdp, :busdm | Ohm | Positive-Sequence Impedance, Imaginary Part |
n:Z1:busacor :busdp, :busdm | Ohm | Positive-Sequence Impedance, Magnitude |
n:phiz1:busacor :busdp, :busdm | deg | Positive-Sequence Impedance, Angle |
n:r1Sbase:busacor :busdp, :busdm | p.u. | Positive-Sequence Impedance, Real Part |
n:x1Sbase:busacor :busdp, :busdm | p.u. | Positive-Sequence Impedance, Imaginary Part |
n:z1Sbase:busacor :busdp, :busdm | p.u. | Positive-Sequence Impedance, Magnitude |
n:R2:busacor :busdp, :busdm | Ohm | Negative-Sequence Impedance, Real Part |
n:X2:busacor :busdp, :busdm | Ohm | Negative-Sequence Impedance, Imaginary Part |
n:Z2:busacor :busdp, :busdm | Ohm | Negative-Sequence Impedance, Magnitude |
n:phiz2:busacor :busdp, :busdm | deg | Negative-Sequence Impedance, Angle |
n:r2Sbase:busacor :busdp, :busdm | p.u. | Negative-Sequence Impedance, Real Part |
n:x2Sbase:busacor :busdp, :busdm | p.u. | Negative-Sequence Impedance, Imaginary Part |
n:z2Sbase:busacor :busdp, :busdm | p.u. | Negative-Sequence Impedance, Magnitude |
n:R0toX0:busacor :busdp, :busdm | · | R0/X0 ratio (Zk") |
n:X0toR0:busacor :busdp, :busdm | · | X0/R0 ratio (Zk") |
n:R2toX2:busacor :busdp, :busdm | · | R2/X2 ratio (Zk") |
n:X2toR2:busacor :busdp, :busdm | · | X2/R2 ratio (Zk") |
n:R:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Ground |
n:X:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Ground |
n:Z:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Ground |
n:phiz:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Ground |
n:Rl:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Line |
n:Xl:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Line |
n:Zl:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Line |
n:phizl:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Line |
n:Rln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Neutral |
n:Xln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Neutral |
n:Zln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Neutral |
n:phizln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Neutral |
n:Rn:busacor :busdp, :busdm | Ohm | Network Resistance, Neutral |
n:Xn:busacor :busdp, :busdm | Ohm | Network Reactance, Neutral |
n:Zn:busacor :busdp, :busdm | Ohm | Network Impedance, Neutral |
n:phizn:busacor :busdp, :busdm | deg | Angle of Network Impedance, Neutral |
n:eff:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | · | Earth Fault Factor |
n:X0toX1:busacor :busdp, :busdm | · | X0/X1 |
n:In:busacor :busdp, :busdm | kA | Neutral Current, Magnitude |
n:phiin:busacor :busdp, :busdm | deg | Neutral Current, Angle |
n:I0:busacor :busdp, :busdm | kA | Zero-Sequence Current, Magnitude |
n:I0x3:busacor :busdp, :busdm | kA | 3*I0 |
n:phii0:busacor :busdp, :busdm | deg | Zero-Sequence Current, Angle |
n:I1:busacor :busdp, :busdm | kA | Positive-Sequence Current, Magnitude |
n:phii1:busacor :busdp, :busdm | deg | Positive-Sequence Current, Angle |
n:I2:busacor :busdp, :busdm | kA | Negative-Sequence Current, Magnitude |
n:phii2:busacor :busdp, :busdm | deg | Negative-Sequence Current, Angle |
n:urpref:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Real Part |
n:uipref:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Pre-fault Voltage, Magnitude |
n:Upref:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Pre-fault Voltage, Angle |
n:phiui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
n:phiu1i1:busacor :busdp, :busdm | deg | Angle between Voltage and Current in positive sequence system |
n:phiu2i2:busacor :busdp, :busdm | deg | Angle between Voltage and Current in negative sequence system |
n:phiu0i0:busacor :busdp, :busdm | deg | Angle between Voltage and Current in zero-sequence system |
n:Ik:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Steady-State Short-Circuit Current |
n:in:busacor :busdp, :busdm | p.u. | Neutral Current, Magnitude |
n:i0r:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Real Part |
n:i0i:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Imaginary Part |
n:i0:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Magnitude |
n:i1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Real Part |
n:i1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Imaginary Part |
n:i1:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Magnitude |
n:i2r:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Real Part |
n:i2i:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Imaginary Part |
n:i2:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Magnitude |
ElmVsc rms simulation results
Read after ComInc (RMS) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:busacor :busdp, :busdm | p.u. | Voltage, Real Part, referred to network |
m:uinet:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:busacor :busdp, :busdm | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:busacor :busdp, :busdm | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:busacor :busdp, :busdm | deg | Positive-Sequence-Voltage, Angle |
m:irnet:busacor :busdp, :busdm | p.u. | Current, Real Part, referred to network |
m:iinet:busacor :busdp, :busdm | p.u. | Current, Imaginary Part, referred to network |
m:inet:busacor :busdp, :busdm | p.u. | Current, Magnitude, referred to network |
m:I:busacor :busdp, :busdm | kA | Current, Magnitude |
m:phii:busacor :busdp, :busdm | deg | Current, Angle |
m:i1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Real Part |
m:i1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Magnitude |
m:I1:busacor :busdp, :busdm | kA | Positive-Sequence Current, Magnitude |
m:phii1:busacor :busdp, :busdm | deg | Positive-Sequence Current, Angle |
m:P:busacor :busdp, :busdm | MW | Active Power |
m:Q:busacor :busdp, :busdm | Mvar | Reactive Power |
m:S:busacor :busdp, :busdm | MVA | Apparent Power |
m:cosphi:busacor :busdp, :busdm | · | Power Factor |
m:tanphi:busacor :busdp, :busdm | · | tan(phi) |
m:Psum:busacor :busdp, :busdm | MW | Total Active Power |
m:Qsum:busacor :busdp, :busdm | Mvar | Total Reactive Power |
m:Ssum:busacor :busdp, :busdm | MVA | Total Apparent Power |
m:cosphisum:busacor :busdp, :busdm | · | Total Power Factor |
m:tanphisum:busacor :busdp, :busdm | · | Total tan(phi) |
m:i1P:busacor :busdp, :busdm | p.u. | Positive-Sequence Active Current |
m:i1Q:busacor :busdp, :busdm | p.u. | Positive-Sequence Reactive Current |
m:I1P:busacor :busdp, :busdm | kA | Positive-Sequence Active Current |
m:I1Q:busacor :busdp, :busdm | kA | Positive-Sequence Reactive Current |
m:ur:busacor :busdp, :busdm | p.u. | Voltage, Real Part |
m:ui:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part |
m:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
m:ir:busacor :busdp, :busdm | p.u. | Current, Real Part |
m:ii:busacor :busdp, :busdm | p.u. | Current, Imaginary Part |
m:i:busacor :busdp, :busdm | p.u. | Current, Magnitude |
m:phiui:busacor :busdp, :busdm | deg | Angle between Voltage and Current |
m:phiu1i1:busacor :busdp, :busdm | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:busacor :busdp, :busdm | s | Fault Clearing Time |
m:Brkload:busacor :busdp, :busdm | % | Breaker Loading |
m:Spu:busacor :busdp, :busdm | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:busacor :busdp, :busdm | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:busacor :busdp, :busdm | deg | Zero-Sequence-Voltage, Angle |
m:u2:busacor :busdp, :busdm | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:busacor :busdp, :busdm | deg | Negative-Sequence-Voltage, Angle |
m:irnet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:iinet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:inet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:I:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Real Part |
m:i0i:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:busacor :busdp, :busdm | p.u. | Zero-Sequence Current, Magnitude |
m:I0:busacor :busdp, :busdm | kA | Zero-Sequence Current, Magnitude |
m:I0x3:busacor :busdp, :busdm | kA | 3*I0 |
m:phii0:busacor :busdp, :busdm | deg | Zero-Sequence Current, Angle |
m:i2r:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Real Part |
m:i2i:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:busacor :busdp, :busdm | p.u. | Negative-Sequence Current, Magnitude |
m:I2:busacor :busdp, :busdm | kA | Negative-Sequence Current, Magnitude |
m:phii2:busacor :busdp, :busdm | deg | Negative-Sequence Current, Angle |
m:P:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:busacor :busdp, :busdm | MW | Positive Sequence Active Power |
m:Q1:busacor :busdp, :busdm | Mvar | Positive Sequence Reactive Power |
m:P2:busacor :busdp, :busdm | MW | Negative Sequence Active Power |
m:Q2:busacor :busdp, :busdm | Mvar | Negative Sequence Reactive Power |
m:P0:busacor :busdp, :busdm | MW | Zero Sequence Active Power |
m:Q0:busacor :busdp, :busdm | Mvar | Zero Sequence Reactive Power |
m:i2P:busacor :busdp, :busdm | p.u. | Negative-Sequence Active Current |
m:i2Q:busacor :busdp, :busdm | p.u. | Negative-Sequence Reactive Current |
m:I2P:busacor :busdp, :busdm | kA | Negative-Sequence Active Current |
m:I2Q:busacor :busdp, :busdm | kA | Negative-Sequence Reactive Current |
m:ur:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:busacor :busdp, :busdm | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:busacor :busdp, :busdm | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:hpi | rad/s | Nominal-angular-frequency |
c:Pm | · | Pulse-modulation factor |
c:snomn | MVA | Total rated apparent power (nparnum*Snom) |
c:K0 | · | Vac/Vdc at PWM=1 |
c:DCPoleLosses | MW | DC pole losses |
c:Pmd_ctrl | · | Pulse-modulation factor (d-axis) |
c:Pmq_ctrl | · | Pulse-modulation factor (q-axis) |
c:i_acdc | · | Control mode |
c:i_mod | · | Modulation |
c:Ccell | F | Cell capacitor |
n:ur:busacor :busdp, :busdm | p.u. | Voltage, Real Part |
n:ui:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part |
n:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:upc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:du:busacor :busdp, :busdm | % | Voltage Deviation |
n:U:busacor :busdp, :busdm | kV | Line-Ground Voltage, Magnitude |
n:phiu:busacor :busdp, :busdm | deg | Voltage, Angle |
n:phiurel:busacor :busdp, :busdm | deg | Voltage, Relative Angle |
n:Ul:busacor :busdp, :busdm | kV | Line-Line Voltage, Magnitude |
n:u1:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:u1pc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:u1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:ishc:busacor :busdp, :busdm | p.u. | Short-Circuit Current, magnitude |
n:Ishc:busacor :busdp, :busdm | kA | Short-Circuit Current, magnitude |
n:fe:busacor :busdp, :busdm | p.u. | Electrical Frequency |
n:dfehz:busacor :busdp, :busdm | Hz | Deviation of the El. Frequency |
n:fehz:busacor :busdp, :busdm | Hz | Electrical Frequency |
n:frnom:busacor :busdp, :busdm | Hz | Nominal Frequency |
n:ishcr:busacor :busdp, :busdm | p.u. | Short-Circuit Current, real |
n:ishci:busacor :busdp, :busdm | p.u. | Short-Circuit Current, imag |
n:dfedt:busacor :busdp, :busdm | p.u./s | Derivative of El. Frequency |
n:ur:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:busacor :busdp, :busdm | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:busacor :busdp, :busdm | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:busacor :busdp, :busdm | kV | 3*U0 |
n:phiu0:busacor :busdp, :busdm | deg | Zero-Sequence Voltage, Angle |
n:U1:busacor :busdp, :busdm | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:busacor :busdp, :busdm | deg | Positive-Sequence Voltage, Angle |
n:u2:busacor :busdp, :busdm | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:busacor :busdp, :busdm | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:busacor :busdp, :busdm | deg | Negative-Sequence Voltage, Angle |
n:U1l:busacor :busdp, :busdm | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:busacor :busdp, :busdm | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:busacor :busdp, :busdm | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:busacor :busdp, :busdm | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:busacor :busdp, :busdm | deg | Neutral-Ground Voltage, Angle |
n:upht:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:busacor :busdp, :busdm | p.u. | Average-Voltage, Magnitude |
n:Um:busacor :busdp, :busdm | kV | Average-Voltage, Magnitude |
n:ishc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, magnitude |
n:Ishc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, magnitude |
n:inshc:busacor :busdp, :busdm | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:busacor :busdp, :busdm | kA | Neutral Short-Circuit Current, magnitude |
n:ishcr:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, real |
n:ishci:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, imag |
s:Pm_in | p.u. | Pulse-modulation factor (input) |
s:f0 | p.u. | Frequency-input |
s:F0Hz | Hz | Frequency-input |
s:dphiu | rad | Voltage-angle (input) |
s:phiu | rad | Voltage-angle |
s:Pmr | · | Pulse-modulation factor (real part) |
s:Pmi | · | Pulse-modulation factor (imaginary part) |
s:iDC | p.u. | DC-current |
s:uDC | p.u. | DC-voltage |
s:iAC_r | p.u. | AC-current, real part |
s:iAC_i | p.u. | AC-current, imaginary part |
s:uAC_r | p.u. | AC-voltage, real part |
s:uAC_i | p.u. | AC-voltage, imaginary part |
s:xd | p.u. | State variable, current controller d-axis |
s:xq | p.u. | State variable, current controller q-axis |
s:cosref | · | Cos(dq-reference-angle) |
s:sinref | · | Sin(dq-reference-angle) |
s:Pmd | · | Pulse-modulation factor (d-axis) |
s:Pmq | · | Pulse-modulation factor (q-axis) |
s:id | p.u. | Current, d-axis |
s:iq | p.u. | Current, q-axis |
s:id_ref | p.u. | d-axis current reference |
s:iq_ref | p.u. | q-axis current reference |
s:block | p.u. | Blocking |
s:simModel | · | 0 - Current source model, 1 - Voltage source model |
s:u_in | p.u. | Positive Sequence Voltage Input |
s:fref | p.u. | Reference frequency |
s:xspeed | p.u. | Frequency |
s:u1r_in | p.u. | Positive Sequence Voltage Input, Real Part |
s:u1i_in | p.u. | Positive sequence Voltage Input, Imaginary Part |
s:u1d_in | p.u. | Positive Sequence Voltage Input, d-axis |
s:u1q_in | p.u. | Positive Sequence Voltage Input, q-axis |
s:uDC_in | p.u. | DC Voltage Input |
s:iDC_in | p.u. | DC Current Input |
s:Ucell | kV | Voltage across cell capacitor |
s:mdc | p.u. | Insertion index, DC-bias |
s:yUcell | · | Voltage across cell capacitor, output |
s:i2d_ref | p.u. | Negative sequence current, d-axis reference |
s:i2q_ref | p.u. | Negative sequence current, q-axis reference |
s:u2r_in | p.u. | Negative Sequence Voltage Input, Real Part |
s:u2i_in | p.u. | Negative Sequence Voltage Input, Imaginary Part |
s:u0r_in | p.u. | Zero Sequence Voltage Input, Real Part |
s:u0i_in | p.u. | Zero Sequence Voltage Input, Imaginary Part |
ElmVsc emt simulation results
Read after ComInc (EMT) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:u0:busacor :busdp, :busdm | p.u. | Zero-Sequence-Voltage |
m:u1r:busacor :busdp, :busdm | p.u. | Voltage Phasor, Real Part |
m:u1i:busacor :busdp, :busdm | p.u. | Voltage Phasor, Imaginary Part |
m:u1:busacor :busdp, :busdm | p.u. | Voltage Phasor, Magnitude |
m:U1:busacor :busdp, :busdm | kV | Line-Ground Voltage Phasor, Magnitude |
m:U1l:busacor :busdp, :busdm | kV | Line-Line Voltage Phasor, Magnitude |
m:phiu1:busacor :busdp, :busdm | deg | Voltage Phasor, Angle |
m:inet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current, referred to network |
m:I:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Phase Current |
m:i0:busacor :busdp, :busdm | p.u. | Zero-Sequence Current |
m:I0:busacor :busdp, :busdm | kA | Zero-Sequence Current |
m:I0x3:busacor :busdp, :busdm | kA | 3*I0 |
m:i1r:busacor :busdp, :busdm | p.u. | Current Phasor, Real Part |
m:i1i:busacor :busdp, :busdm | p.u. | Current Phasor, Imaginary Part |
m:i1:busacor :busdp, :busdm | p.u. | Current Phasor, Magnitude |
m:I1:busacor :busdp, :busdm | kA | Current Phasor, Magnitude |
m:phii1:busacor :busdp, :busdm | deg | Current Phasor, Angle |
m:P:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Psum:busacor :busdp, :busdm | MW | Power-Phasor, Active Power |
m:Qsum:busacor :busdp, :busdm | Mvar | Power Phasor, Reactive Part |
m:Ssum:busacor :busdp, :busdm | MVA | Power Phasor, Apparent Power |
m:i1P:busacor :busdp, :busdm | p.u. | Current Phasor, Active Current |
m:i1Q:busacor :busdp, :busdm | p.u. | Current Phasor, Reactive Current |
m:I1P:busacor :busdp, :busdm | kA | Current Phasor, Active Current |
m:I1Q:busacor :busdp, :busdm | kA | Current Phasor, Reactive Current |
m:u:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
m:i:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Current |
m:phiu1i1:busacor :busdp, :busdm | deg | Angle between Voltage and Current Phasor |
m:Tfct:busacor :busdp, :busdm | s | Fault Clearing Time |
m:TfctPh:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:unet:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, referred to network |
m:cosphi1:busacor :busdp, :busdm | · | Power-Phasor, Power-Factor |
c:hpi | rad/s | Nominal-angular-frequency |
c:Pm | · | Pulse-modulation factor |
c:snomn | MVA | Total nominal apparent power (nparnum*Snom) |
c:K0 | · | Vac/Vdc at PWM=1 |
c:Losses | kW | Total converter losses |
c:Pmd_ctrl | · | Pulse-modulation factor (d-axis) |
c:Pmq_ctrl | · | Pulse-modulation factor (q-axis) |
c:fmodMmc | Hz | Modulation-frequency |
c:Uarm_A | kV | MMC AC voltage, phase A |
c:Uarm_B | kV | MMC AC voltage, phase B |
c:Uarm_C | kV | MMC AC voltage, phase C |
c:i_acdc | · | Control mode |
c:Idp_A | kA | D1 current |
c:Idp_B | kA | D2 current |
c:Idp_C | kA | D3 current |
c:Idm_A | kA | D4 current |
c:Idm_B | kA | D5 current |
c:Idm_C | kA | D6 current |
c:Iup_A | kA | Upper arm current, phase A |
c:Iup_B | kA | Upper arm current, phase B |
c:Iup_C | kA | Upper arm current, phase C |
c:Ilow_A | kA | Lower arm current, phase A |
c:Ilow_B | kA | Lower arm current, phase B |
c:Ilow_C | kA | Lower arm current, phase C |
c:i_mod | · | Modulation |
c:fmod | Hz | Modulation-frequency |
n:u:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
n:upc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Phase Voltage |
n:U:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Phase Voltage |
n:ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage |
n:ulpc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | % | Line-Line Voltage |
n:Ul:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage |
n:u0:busacor :busdp, :busdm | p.u. | Zero-Sequence-Voltage |
n:U0:busacor :busdp, :busdm | kV | Zero-Sequence-Voltage |
n:U0x3:busacor :busdp, :busdm | kV | 3*U0 |
n:u1:busacor :busdp, :busdm | p.u. | Voltage Phasor, Magnitude |
n:u1pc:busacor :busdp, :busdm | % | Voltage Phasor, Magnitude |
n:u1r:busacor :busdp, :busdm | p.u. | Voltage Phasor, Real Part |
n:u1i:busacor :busdp, :busdm | p.u. | Voltage Phasor, Imaginary Part |
n:U1:busacor :busdp, :busdm | kV | Voltage Phasor, Magnitude |
n:phiu1:busacor :busdp, :busdm | deg | Voltage Phasor, Angle |
n:U1l:busacor :busdp, :busdm | kV | Line-Line Voltage Phasor, Magnitude |
n:uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage |
n:Uln:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage |
n:un:busacor :busdp, :busdm | p.u. | Neutral-Ground Voltage |
n:Un:busacor :busdp, :busdm | kV | Neutral-Ground Voltage |
n:ishc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current |
n:Ishc:busac:Aor :busdp, :busdm; per phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:inshc:busacor :busdp, :busdm | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:busacor :busdp, :busdm | kA | Neutral Short-Circuit Current, magnitude |
n:fe:busacor :busdp, :busdm | p.u. | Electrical Frequency |
n:dfehz:busacor :busdp, :busdm | Hz | Deviation of the El. Frequency |
n:fehz:busacor :busdp, :busdm | Hz | Electrical Frequency |
n:frnom:busacor :busdp, :busdm | Hz | Nominal Frequency |
s:Pm_in | p.u. | Pulse-modulation factor (input) |
s:f0 | p.u. | Frequency-input |
s:F0Hz | Hz | Frequency-input |
s:dphiu | rad | Voltage-angle (input) |
s:phiu | rad | Voltage-angle |
s:mod | · | Modulation-signal |
s:Pmr | · | Pulse-modulation factor (real part) |
s:Pmi | · | Pulse-modulation factor (imaginary part) |
s:iDC | p.u. | DC-current |
s:uDC | p.u. | DC-voltage |
s:iAC_r | p.u. | AC-current, real part |
s:iAC_i | p.u. | AC-current, imaginary part |
s:uAC_r | p.u. | AC-voltage, real part |
s:uAC_i | p.u. | AC-voltage, imaginary part |
s:xd | p.u. | State variable, current controller d-axis |
s:xq | p.u. | State variable, current controller q-axis |
s:cosref | · | Cos(dq-reference-angle) |
s:sinref | · | Sin(dq-reference-angle) |
s:Pmd | · | Pulse-modulation factor (d-axis) |
s:Pmq | · | Pulse-modulation factor (q-axis) |
s:id | p.u. | Current, d-axis |
s:iq | p.u. | Current, q-axis |
s:id_ref | p.u. | d-axis current reference |
s:iq_ref | p.u. | q-axis current reference |
s:i2d_ref | p.u. | Negative sequence current, d-axis reference |
s:i2q_ref | p.u. | Negative sequence current, q-axis reference |
s:block | p.u. | Blocking |
s:N_la | · | Number of submodules (lower arm), phase A |
s:N_lb | · | Number of submodules (lower arm), phase B |
s:N_lc | · | Number of submodules (lower arm), phase C |
s:nlow_a | · | Insertion index (lower arm), phase A |
s:nlow_b | · | Insertion index (lower arm), phase B |
s:nlow_c | · | Insertion index (lower arm), phase C |
s:Pm0 | · | Pulse-modulation factor (zero sequence) |
s:simModel | · | 0 - Current source model, 1 - Voltage source model |
s:N_ua | · | Number of submodules (upper arm), phase A |
s:N_ub | · | Number of submodules (upper arm), phase B |
s:N_uc | · | Number of submodules (upper arm), phase C |
s:nup_a | · | Insertion index (upper arm), phase A |
s:nup_b | · | Insertion index (upper arm), phase B |
s:nup_c | · | Insertion index (upper arm), phase C |
s:mdc_a | · | Insertion index, DC-bias, phase A |
s:mdc_b | · | Insertion index, DC-bias, phase B |
s:mdc_c | · | Insertion index, DC-bias, phase C |
s:Iup_A | kA | Upper arm current, phase A |
s:Iup_B | kA | Upper arm current, phase B |
s:Iup_C | kA | Upper arm current, phase C |
s:Ilow_A | kA | Lower arm current, phase A |
s:Ilow_B | kA | Lower arm current, phase B |
s:Ilow_C | kA | Lower arm current, phase C |
s:Uupcap_A | kV | Upper arm capacitor voltage, phase A |
s:Uupcap_B | kV | Upper arm capacitor voltage, phase B |
s:Uupcap_C | kV | Upper arm capacitor voltage, phase C |
s:Ulowcap_A | kV | Lower arm capacitor voltage, phase A |
s:Ulowcap_B | kV | Lower arm capacitor voltage, phase B |
s:Ulowcap_C | kV | Lower arm capacitor voltage, phase C |
s:Uuparm_A | kV | Upper arm submodules voltage, phase A |
s:Uuparm_B | kV | Upper arm submodules voltage, phase B |
s:Uuparm_C | kV | Upper arm submodules voltage, phase C |
s:Ulowarm_A | kV | Lower arm submodules voltage, phase A |
s:Ulowarm_B | kV | Lower arm submodules voltage, phase B |
s:Ulowarm_C | kV | Lower arm submodules voltage, phase C |
s:Uarmcap_avg | kV | Average of arm capacitor voltages |
s:gate | · | Gate signals |
s:Ucap | kV | Submodule capacitor voltages |
s:u_in | p.u. | Voltage Input |
s:uDC_in | p.u. | DC Voltage Input |
s:iDC_in | p.u. | DC Voltage Input |
s:ur_in | p.u. | Voltage Input, Real Part |
s:ui_in | p.u. | Voltage Input, Imaginary Part |
s:ud_in | p.u. | Voltage Input, d-axis |
s:uq_in | p.u. | Voltage Input, q-axis |
s:u0_in | p.u. | Voltage Input, Zero sequence component |
s:Ucell | kV | Voltage across DC side equivalent capacitor |
s:mdc | p.u. | Insertion index, DC-bias |
s:yUcell | · | Voltage across cell capacitor, output |
s:u_a | p.u. | Firing signal, phase A |
s:u_b | p.u. | Firing signal, phase B |
s:u_c | p.u. | Firing signal, phase C |
s:Upc_A | kV | Capacitive voltage, TpA |
s:Upc_B | kV | Capacitive voltage, TpB |
s:Upc_C | kV | Capacitive voltage, TpC |
s:Umc_A | kV | Capacitive voltage, TmA |
s:Umc_B | kV | Capacitive voltage, TmB |
s:Umc_C | kV | Capacitive voltage, TmC |
s:urefA | p.u. | Reference voltage, phase A |
s:urefB | p.u. | Reference voltage, phase B |
s:urefC | p.u. | Reference voltage, phase C |
s:g1 | · | Firing signal, T1 |
s:g2 | · | Firing signal, T2 |
s:g3 | · | Firing signal, T3 |
s:g4 | · | Firing signal, T4 |
s:g5 | · | Firing signal, T5 |
s:g6 | · | Firing signal, T6 |
s:Ip_A | kA | T1 current |
s:Ip_B | kA | T2 current |
s:Ip_C | kA | T3 current |
s:Im_A | kA | T4 current |
s:Im_B | kA | T5 current |
s:Im_C | kA | T6 current |
s:Idp_A | kA | D1 current |
s:Idp_B | kA | D2 current |
s:Idp_C | kA | D3 current |
s:Idm_A | kA | D4 current |
s:Idm_B | kA | D5 current |
s:Idm_C | kA | D6 current |
ElmVsc dc load flow results
Read after ComLdf (DC) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:P:busacor :busdp, :busdm | MW | Active Power |
m:Q:busacor :busdp, :busdm | Mvar | Reactive Power |
c:i_acdc | · | Control mode |
c:pini | · | Active power setpoint |
c:Pmin | MW | Lower limit of active power |
c:Pmax | MW | Upper limit of active power |
c:i_plim | · | Active power limited |
c:Kpf | MW/Hz | Frequency bias |
c:Kp | p.u. | Active power participation |
c:zonewscale | · | Wind generation zone scaling factor |
c:iRefElement | · | Reference element |
c:iPowerOn | · | Flag |
c:dphi | deg | Measured angle difference |
c:Pmeas | MW | Measured active power |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Pmax_uc | MW | Upper limit of active power |
c:Pmin_uc | MW | Lower limit of active power |
c:phiu | rad | Voltage angle |
n:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:upc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:U:busacor :busdp, :busdm | kV | Line-Ground Voltage, Magnitude |
n:phiu:busacor :busdp, :busdm | deg | Voltage, Angle |
n:phiurel:busacor :busdp, :busdm | deg | Voltage, Relative Angle |
n:Ul:busacor :busdp, :busdm | kV | Line-Line Voltage, Magnitude |
n:u1:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:Pgen:busacor :busdp, :busdm | MW | Generation, Active Power |
n:Pmot:busacor :busdp, :busdm | MW | Motor Load, Active Power |
n:Pload:busacor :busdp, :busdm | MW | General Load, Active Power |
n:Pcomp:busacor :busdp, :busdm | MW | Compensation (Losses) |
n:Pnet:busacor :busdp, :busdm | MW | External Networks, Active Power |
n:Pflow:busacor :busdp, :busdm | MW | Power Flow, Active Power |
s:pset | MW | Active power setpoint |
s:dFin | Hz | Frequency Deviation |
ElmVsc modal analysis results
Read after ComMod with GetAttribute. c: calculation parameter, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
c:hpi | rad/s | Nominal-angular-frequency |
c:Pm | · | Pulse-modulation factor |
c:snomn | MVA | Total rated apparent power (nparnum*Snom) |
c:K0 | · | Vac/Vdc at PWM=1 |
c:DCPoleLosses | MW | DC pole losses |
c:Pmd_ctrl | · | Pulse-modulation factor (d-axis) |
c:Pmq_ctrl | · | Pulse-modulation factor (q-axis) |
c:i_acdc | · | Control mode |
c:i_mod | · | Modulation |
c:Ccell | F | Cell capacitor |
s:Pm_in | p.u. | Pulse-modulation factor (input) |
s:f0 | p.u. | Frequency-input |
s:F0Hz | Hz | Frequency-input |
s:dphiu | rad | Voltage-angle (input) |
s:phiu | rad | Voltage-angle |
s:Pmr | · | Pulse-modulation factor (real part) |
s:Pmi | · | Pulse-modulation factor (imaginary part) |
s:iDC | p.u. | DC-current |
s:uDC | p.u. | DC-voltage |
s:iAC_r | p.u. | AC-current, real part |
s:iAC_i | p.u. | AC-current, imaginary part |
s:uAC_r | p.u. | AC-voltage, real part |
s:uAC_i | p.u. | AC-voltage, imaginary part |
s:xd | p.u. | State variable, current controller d-axis |
s:xq | p.u. | State variable, current controller q-axis |
s:cosref | · | Cos(dq-reference-angle) |
s:sinref | · | Sin(dq-reference-angle) |
s:Pmd | · | Pulse-modulation factor (d-axis) |
s:Pmq | · | Pulse-modulation factor (q-axis) |
s:id | p.u. | Current, d-axis |
s:iq | p.u. | Current, q-axis |
s:id_ref | p.u. | d-axis current reference |
s:iq_ref | p.u. | q-axis current reference |
s:block | p.u. | Blocking |
s:simModel | · | 0 - Current source model, 1 - Voltage source model |
s:u_in | p.u. | Positive Sequence Voltage Input |
s:fref | p.u. | Reference frequency |
s:xspeed | p.u. | Frequency |
s:u1r_in | p.u. | Positive Sequence Voltage Input, Real Part |
s:u1i_in | p.u. | Positive sequence Voltage Input, Imaginary Part |
s:u1d_in | p.u. | Positive Sequence Voltage Input, d-axis |
s:u1q_in | p.u. | Positive Sequence Voltage Input, q-axis |
s:uDC_in | p.u. | DC Voltage Input |
s:iDC_in | p.u. | DC Current Input |
s:Ucell | kV | Voltage across cell capacitor |
s:mdc | p.u. | Insertion index, DC-bias |
s:yUcell | · | Voltage across cell capacitor, output |
ElmVsc optimal power flow results
Read after ComOpf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:urnet:busacor :busdp, :busdm | p.u. | Voltage, Real Part, referred to network |
m:uinet:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:busacor :busdp, :busdm | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:busacor :busdp, :busdm | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:busacor :busdp, :busdm | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:busacor :busdp, :busdm | deg | Positive-Sequence-Voltage, Angle |
m:irnet:busacor :busdp, :busdm | p.u. | Current, Real Part, referred to network |
m:iinet:busacor :busdp, :busdm | p.u. | Current, Imaginary Part, referred to network |
m:inet:busacor :busdp, :busdm | p.u. | Current, Magnitude, referred to network |
m:I:busacor :busdp, :busdm | kA | Current, Magnitude |
m:phii:busacor :busdp, :busdm | deg | Current, Angle |
m:i1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Real Part |
m:i1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:busacor :busdp, :busdm | p.u. | Positive-Sequence Current, Magnitude |
m:I1:busacor :busdp, :busdm | kA | Positive-Sequence Current, Magnitude |
m:phii1:busacor :busdp, :busdm | deg | Positive-Sequence Current, Angle |
m:P:busacor :busdp, :busdm | MW | Active Power |
m:Q:busacor :busdp, :busdm | Mvar | Reactive Power |
m:S:busacor :busdp, :busdm | MVA | Apparent Power |
m:cosphi:busacor :busdp, :busdm | · | Power Factor |
m:tanphi:busacor :busdp, :busdm | · | tan(phi) |
m:Psum:busacor :busdp, :busdm | MW | Total Active Power |
m:Qsum:busacor :busdp, :busdm | Mvar | Total Reactive Power |
m:Ssum:busacor :busdp, :busdm | MVA | Total Apparent Power |
m:cosphisum:busacor :busdp, :busdm | · | Total Power Factor |
m:tanphisum:busacor :busdp, :busdm | · | Total tan(phi) |
m:i1P:busacor :busdp, :busdm | p.u. | Positive-Sequence Active Current |
m:i1Q:busacor :busdp, :busdm | p.u. | Positive-Sequence Reactive Current |
m:I1P:busacor :busdp, :busdm | kA | Positive-Sequence Active Current |
m:I1Q:busacor :busdp, :busdm | kA | Positive-Sequence Reactive Current |
m:ur:busacor :busdp, :busdm | p.u. | Voltage, Real Part |
m:ui:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part |
m:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
m:ir:busacor :busdp, :busdm | p.u. | Current, Real Part |
m:ii:busacor :busdp, :busdm | p.u. | Current, Imaginary Part |
m:i:busacor :busdp, :busdm | p.u. | Current, Magnitude |
m:phiui:busacor :busdp, :busdm | deg | Angle between Voltage and Current |
m:phiu1i1:busacor :busdp, :busdm | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:busacor :busdp, :busdm | s | Fault Clearing Time |
m:Brkload:busacor :busdp, :busdm | % | Breaker Loading |
m:Spu:busacor :busdp, :busdm | MVA/p.u. | Apparent Power per p.u. Voltage |
c:Pm | · | Pulse-modulation factor |
c:snomn | MVA | Total rated apparent power (nparnum*Snom) |
c:K0 | · | Vac/Vdc at PWM=1 |
c:DCPoleLosses | MW | DC pole losses |
c:Kq | p.u. | Reactive power participation |
c:i_acdc | · | Control mode |
c:uini | p.u. | Voltage setpoint |
c:uinidc | p.u. | Voltage setpoint (DC) |
c:pmsetp | · | PWM factor |
c:phisetp | deg | Initial Angle |
c:phirelref | rad | Relative reference angle |
c:i_mod | · | Modulation |
c:uDC | p.u. | DC-voltage |
c:pini | · | Active power setpoint |
c:qini | · | Reactive power setpoint |
c:Qmax | Mvar | Upper limit of reactive power |
c:Qmin | Mvar | Lower limit of reactive power |
c:Pmin | MW | Lower limit of active power |
c:Pmax | MW | Upper limit of active power |
c:i_qlim | · | Reactive power limited |
c:i_plim | · | Active power limited |
c:Kpf | MW/Hz | Frequency bias |
c:Kp | p.u. | Active power participation |
c:zonewscale | · | Wind generation zone scaling factor |
c:iRefElement | · | Reference element |
c:iPowerOn | · | Flag |
c:i_vlim | · | Voltage setpoint limit reached |
c:dphi | deg | Measured angle difference |
c:Pmeas | MW | Measured active power |
c:nCtrlIter | · | No. of CTRL-iterations |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
c:Pmax_uc | MW | Upper limit of active power |
c:Pmin_uc | MW | Lower limit of active power |
c:totRedispatchP | MWh | Total redispatched active power |
c:totRedispatchQ | Mvarh | Total redispatched reactive power |
c:totRedispatchCosts | USD | Total additional redispatch costs |
n:ur:busacor :busdp, :busdm | p.u. | Voltage, Real Part |
n:ui:busacor :busdp, :busdm | p.u. | Voltage, Imaginary Part |
n:u:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:upc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:du:busacor :busdp, :busdm | % | Voltage Deviation |
n:U:busacor :busdp, :busdm | kV | Line-Ground Voltage, Magnitude |
n:phiu:busacor :busdp, :busdm | deg | Voltage, Angle |
n:phiurel:busacor :busdp, :busdm | deg | Voltage, Relative Angle |
n:Ul:busacor :busdp, :busdm | kV | Line-Line Voltage, Magnitude |
n:u1:busacor :busdp, :busdm | p.u. | Voltage, Magnitude |
n:u1pc:busacor :busdp, :busdm | % | Voltage, Magnitude |
n:u1r:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:busacor :busdp, :busdm | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:busacor :busdp, :busdm | MW | Generation, Active Power |
n:Qgen:busacor :busdp, :busdm | Mvar | Generation, Reactive Power |
n:Pmot:busacor :busdp, :busdm | MW | Motor Load, Active Power |
n:Qmot:busacor :busdp, :busdm | Mvar | Motor Load, Reactive Power |
n:Pload:busacor :busdp, :busdm | MW | General Load, Active Power |
n:Qload:busacor :busdp, :busdm | Mvar | General Load, Reactive Power |
n:Pcomp:busacor :busdp, :busdm | MW | Compensation (Losses) |
n:Qcomp:busacor :busdp, :busdm | Mvar | Compensation |
n:Pnet:busacor :busdp, :busdm | MW | External Networks, Active Power |
n:Qnet:busacor :busdp, :busdm | Mvar | External Networks, Reactive Power |
n:Pflow:busacor :busdp, :busdm | MW | Power Flow, Active Power |
n:Qflow:busacor :busdp, :busdm | Mvar | Power Flow, Reactive Power |
n:Pout:busacor :busdp, :busdm | MW | Outgoing Flow, Active Power |
n:Qout:busacor :busdp, :busdm | Mvar | Outgoing Power, Reactive Power |
n:Sout:busacor :busdp, :busdm | MVA | Outgoing Power, Apparent Power |
n:cosphiout:busacor :busdp, :busdm | · | Outgoing Power, Power Factor |
n:Pbalance:busacor :busdp, :busdm | MW | Active Power Balance (=0) |
n:Qbalance:busacor :busdp, :busdm | Mvar | Reactive Power Balance (=0) |
n:LossPdown:busacor :busdp, :busdm | MW | Losses, downstream |
n:LossQdown:busacor :busdp, :busdm | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:busacor :busdp, :busdm | MW | Load losses, downstream |
n:LossQdownload:busacor :busdp, :busdm | Mvar | Load losses, downstream |
n:LossPdownnoload:busacor :busdp, :busdm | MW | No load losses, downstream |
n:LossQdownnoload:busacor :busdp, :busdm | Mvar | No load losses, downstream |
n:du_feed:busacor :busdp, :busdm | % | Difference from voltage at start of feeder |
ElmVsc basic data
b: values are worked out from the input data. Read them; they are not set.
| Attribute | Unit | Description |
|---|---|---|
b:loc_name | · | Name |
b:iWindGen | · | Wind Generator |
Related
- All 73 classes in the attribute reference
- Run a load flow and export the results with Python
- PowerFactory Python API: getting started
← ElmRecmono Rectifier/Inverter/1 DC-Connection · ElmVscmono PWM Converter/1 DC-Connection →