ElmShnt attributesPowerFactory Shunt/Filter
Every attribute of the PowerFactory Shunt/Filter (ElmShnt): 179 input parameters and 1054 result variables, with units and meaning. Copy a name into GetAttribute or SetAttribute.
What ElmShnt is
A shunt: a capacitor bank, a reactor or a tuned filter, with switchable steps.
- Class
ElmShnt, element class- PowerFactory name
- Shunt/Filter
- Terminal suffix
:bus1terminal- Attributes
- 179 input parameters and 1054 result variables, in 7 calculations
Most used ElmShnt attributes
| Attribute | Unit | Description | Where |
|---|---|---|---|
m:Q:bus1 | Mvar | Reactive Powerreactive power | Load flow |
shtype | · | Shunt TypeR-L, C, R-L-C... | input data |
qcapn | Mvar | Rated Reactive Power, Crated reactive power, capacitive | input data |
qrean | Mvar | Rated Reactive Power, Lrated reactive power, inductive | input data |
ncapa | · | Act. No. of Stepsteps in service | input data |
ncapx | · | Max. No. of Stepsnumber of steps | input data |
ushnm | kV | Rated Voltage | input data |
outserv | · | Out of Service | input data |
Read and write ElmShnt in Python
import powerfactory
app = powerfactory.GetApplication() # GetApplicationExt() from outside PowerFactory
app.GetFromStudyCase("ComLdf").Execute() # results exist after a calculation
for shunt in app.GetCalcRelevantObjects("*.ElmShnt"):
q_bus1 = shunt.GetAttribute("m:Q:bus1") # Reactive Power, Mvar
print(shunt.loc_name, q_bus1)
shunt = app.GetCalcRelevantObjects("*.ElmShnt")[0]
shunt.SetAttribute("ncapa", 2) # switch in 2 steps- A result at a terminal of the shunt/filter needs the terminal in its name:
m:P:bus1, notm:P, which raisesAttributeError. - An input parameter is read and written with or without its
e:prefix:GetAttribute("outserv")andGetAttribute("e:outserv")give the same value. - RMS and EMT variables change over time: record them in a results object (
ElmRes) to read the whole curve.GetAttributeafter a run gives the value at the last time step.
- Input parameters179
- Load flow results232
- Short-circuit results362
- RMS simulation results177
- EMT simulation results126
- DC load flow results15
- Modal analysis results19
- Optimal power flow results123
- Basic data1
ElmShnt input parameters
The element data, as typed in GetAttribute and SetAttribute (the e: prefix is optional). Setting one changes the model.
| Attribute | Unit | Description |
|---|---|---|
loc_name | · | Name |
chr_name | · | Characteristic Name |
for_name | · | Foreign Key |
dat_src | · | Data source |
imldc | · | Control Mode |
sernum | · | Serial Number |
manuf | · | Manufacturer |
commissionDate | · | Commissioning Date |
appr_modby | · | Modified by |
mode_inp | · | Input Mode |
outserv | · | Out of Service |
iintgnd | · | N-Connection |
ilcph | · | Phase |
iQorient | · | Orientation |
ncapx | · | Max. No. of Steps |
ncapa | · | Act. No. of Step |
shtype | · | Shunt Type |
i_opt | · | Use Controller for OPF optimisation |
i_optCont | · | Control Mode |
isCtrlShnt | · | Tap Control for Unit Commitment |
isCtrlShntCont | · | Control Mode |
ctrlUsage | · | Tap Changer |
curativeLim | · | Max. curative tap deviation |
isAllowSwitching | · | Allow control to be switched on/off |
minTap | · | Min. No. of Steps |
itrmt | · | Type |
iFinalSlope | · | Set final slope (peak values) |
ksat | · | Saturation Exponent |
iLimb | · | Core |
iInterPol | · | Interpolation |
iFit | · | Data fitting |
iHyster | · | Model |
iResFlux | · | Residual flux |
systp | · | System Type |
iZeConfig | · | Configuration |
iswitch | · | Switchable |
i_cont | · | Tap Changer |
constr | · | Year of Construction |
appr_status | · | Status |
i_rem | · | Remote Control |
pf_recap_mx | · | Power Factor |
pf_recap_mn | · | Power Factor |
uset_mode | · | Setpoint |
iIntTapCtrl | · | Use Integrated Tap Controller |
iTaps | · | According to Measurement Report |
iperfect | · | Ideal component |
ushnm | kV | Rated Voltage |
qcapn | Mvar | Rated Reactive Power, C |
qtotn | Mvar | Rated Reactive Power, L-C |
cucap | A | Rated Current, C |
cutot | A | Rated Current, L-C |
bcap | uS | Susceptance |
ccap | uF | Capacitance |
c1 | uF | Capacitance C1 |
c2 | uF | Capacitance C2 |
pgrad | % | Degree |
fres | Hz | Resonant Frequency |
nres | · | Tuning Order |
qrean | Mvar | Rated Reactive Power, L |
curea | A | Rated Current, L |
xrea | Ohm | Reactance |
rlrea | mH | Inductance |
grea | · | Quality Factor (at fn) |
greaf0 | · | Quality Factor (at fr) |
rrea | Ohm | Resistance |
rpara | Ohm | Parallel Resistance |
tandc | · | Loss Factor, tan(delta) |
gparac | uS | Parallel Conductance |
psi0 | p.u. | Knee Flux |
xmair | p.u. | Saturated Reactance |
smoothfac | % | Smoothing Factor |
Lwidth | % | Loop width |
PsiresA | p.u. | Residual flux, ph. A |
PsiresB | p.u. | Residual flux, ph. B |
PsiresC | p.u. | Residual flux, ph. C |
Bg | nS | Susceptance to Ground |
Xe | Ohm | Reactance, Xe |
Re | Ohm | Resistance, Re |
X0toX1 | · | X0/X1 ratio |
R0toR1 | · | R0/R1 ratio |
B0toB1 | · | B0/B1 ratio |
G0toG1 | · | G0/G1 ratio |
acost | USD/a | Annual Cost |
Tctrl | s | Controller Time Constant |
Kctrl | p.u./% | Controller Sensitivity dq/dv |
usetp_mx | p.u. | Upper Voltage Limit |
usetp_mn | p.u. | Lower Voltage Limit |
qsetp_mx | Mvar | Upper Reactive Power Limit |
qsetp_mn | Mvar | Lower Reactive Power Limit |
pfsetp_mx | · | Upper Power Factor Limit |
pfsetp_mn | · | Lower Power Factor Limit |
GPSlat | deg | Latitude / Northing |
GPSlon | deg | Longitude / Easting |
penaltyCosts | USD | Penalty costs per tap deviation |
curativeCosts | USD | Costs per curative tap deviation |
switchOnCosts | USD | Switch-on costs |
switchOffCosts | USD | Switch-off costs |
appr_modif | · | Modified |
satcur | p.u. | Current (peak) |
satflux | p.u. | Flux (peak) |
satcue | % | Current (RMS) |
satvol | p.u. | Voltage (RMS) |
mTaps | · | Measurement Report |
cimRdfId | · | RDF ID |
desc | · | Description |
sOpComment | · | Operator Comment |
fold_id | · | In Folder |
bus1 | · | TerminalObject: StaCubic |
bus1n | · | NeutralObject: StaCubic |
fcharL | ChaPol,ChaVec,ChaMat | L(f) |
fcharR | ChaPol,ChaVec,ChaMat | Rs(f) |
fcharC | ChaPol,ChaVec,ChaMat | C(f) |
fcharL0 | ChaPol,ChaVec,ChaMat | L0(f) |
fcharR0 | ChaPol,ChaVec,ChaMat | Rs0(f) |
fcharC0 | ChaPol,ChaVec,ChaMat | C0(f) |
fcharC1 | ChaPol,ChaVec,ChaMat | C1(f) |
fcharC2 | ChaPol,ChaVec,ChaMat | C2(f) |
fcharRp | ChaPol,ChaVec,ChaMat | Rp(f) |
doc_id | · | Additional Data |
pOwner | · | OwnerObject: ElmOwner |
pOperator | · | OperatorObject: ElmOperator |
p_rem | · | Controlled NodeObject: StaBar,ElmTerm |
p_cub | · | Q Controlled atObject: StaCubic,ElmBoundary |
pStoch | StoTyptrf | Element model |
cpHeadFold | · | Head Folder |
bus1_bar | · | Terminal |
bus1n_bar | · | Neutral |
cpGrid | · | GridObject: ElmNet |
cpZone | · | ZoneObject: ElmZone |
cpArea | · | AreaObject: ElmArea |
cpFeed | · | FeederObject: ElmFeeder |
ciDist | · | Distance from infeed in number of buses |
ciLater | · | Lateral Index |
ciDistRoot | · | Distance from first infeed in number of buses |
ciDistAll | · | Distance from infeed in number of buses including switches |
ciDistAllRoot | · | Distance from first infeed in number of buses including switches |
cpOwner | · | OwnerObject: ElmOwner |
cpOperator | · | OperatorObject: ElmOperator |
cpBranch | · | BranchObject: ElmBranch |
cpSite | · | SiteObject: ElmSite |
cpSubstat | · | SubstationObject: ElmSubstat,ElmTrfstat |
cpMeteostat | · | Meteo StationObject: ElmMeteostat |
ciOutaged | · | Planned Outage |
ciEnergized | · | Energized |
ciEarthed | · | Earthed |
cDisplayName | · | Display Name |
cpSupplyTransformer | · | Supplying TransformerObject: ElmTr?,ElmTrmult |
cpSupplyTrfStation | · | Supplying Secondary SubstationObject: ElmTrfstat |
cpSupplySubstation | · | Supplying SubstationObject: ElmSubstat |
cgnd | · | Star Point |
ctech | · | Technology |
harmPgeL | mH | Inductance |
harmPgeR | Ohm | Resistance |
harmPgeC | uF | Capacitance |
harmPgeL0 | mH | Zero-sequence Ind. |
harmPgeR0 | Ohm | Zero-sequence Res. |
harmPgeC0 | uF | Zero-sequence Cap. |
harmPgeC1 | uF | Capacitance 1 |
harmPgeC2 | uF | Capacitance 2 |
harmPgeRp | Ohm | Parallel Resistance |
xreapu | p.u. | Linear Reactance |
cPsiresC | p.u. | Residual flux, ph. C |
aFrolich | · | Frolich equation coefficient a |
bFrolich | · | Frolich equation coefficient b |
cFrolich | · | Frolich equation coefficient c |
xsatFrolich | · | Frolich equation saturated reactance (p.u.) |
mseFrolich | · | Frolich equation, mean squared error |
cpCtrlNode | · | Target NodeObject: ElmTerm |
c_pstac | · | External Station ControllerObject: ElmStactrl |
c_pctrl | · | Shunt ControllerObject: ElmShntctrl |
qdslCtrl | · | Quasi-Dynamic ModelObject: ElmQdsl |
Qmax | Mvar | Max. Rated Reactive Power |
Qact | Mvar | Actual Reactive Power |
FOR1 | 1/a | Forced Outage Rate |
FOE | h/a | Forced Outage Expectancy |
FOD | h | Forced Outage Duration |
CCEarFr | 1/a | Frequency of single earth faults |
CCEarRepMu | h | Repair duration |
CCEarProb | % | Conditional probability of a second earth fault |
ElmShnt load flow results
Read after ComLdf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1 | p.u. | Current, Magnitude, referred to network |
m:I:bus1 | kA | Current, Magnitude |
m:phii:bus1 | deg | Current, Angle |
m:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:S:bus1 | MVA | Apparent Power |
m:cosphi:bus1 | · | Power Factor |
m:tanphi:bus1 | · | tan(phi) |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:Ssum:bus1 | MVA | Total Apparent Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:tanphisum:bus1 | · | Total tan(phi) |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:ur:bus1 | p.u. | Voltage, Real Part |
m:ui:bus1 | p.u. | Voltage, Imaginary Part |
m:u:bus1 | p.u. | Voltage, Magnitude |
m:ir:bus1 | p.u. | Current, Real Part |
m:ii:bus1 | p.u. | Current, Imaginary Part |
m:i:bus1 | p.u. | Current, Magnitude |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Brkload:bus1 | % | Breaker Loading |
m:Spu:bus1 | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:bus1 | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:bus1 | deg | Zero-Sequence-Voltage, Angle |
m:u2:bus1 | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:bus1 | deg | Negative-Sequence-Voltage, Angle |
m:irnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part, referred to network |
m:iinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part, referred to network |
m:inet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude, referred to network |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:bus1 | p.u. | Zero-Sequence Current, Real Part |
m:i0i:bus1 | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:bus1 | p.u. | Zero-Sequence Current, Magnitude |
m:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1 | kA | 3*I0 |
m:phii0:bus1 | deg | Zero-Sequence Current, Angle |
m:i2r:bus1 | p.u. | Negative-Sequence Current, Real Part |
m:i2i:bus1 | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:bus1 | p.u. | Negative-Sequence Current, Magnitude |
m:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1 | deg | Negative-Sequence Current, Angle |
m:ubfacI:bus1 | % | Current Unbalance Factor |
m:ubfacS:bus1 | % | Power Unbalance Factor |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:bus1 | MW | Positive Sequence Active Power |
m:Q1:bus1 | Mvar | Positive Sequence Reactive Power |
m:P2:bus1 | MW | Negative Sequence Active Power |
m:Q2:bus1 | Mvar | Negative Sequence Reactive Power |
m:P0:bus1 | MW | Zero Sequence Active Power |
m:Q0:bus1 | Mvar | Zero Sequence Reactive Power |
m:i2P:bus1 | p.u. | Negative-Sequence Active Current |
m:i2Q:bus1 | p.u. | Negative-Sequence Reactive Current |
m:I2P:bus1 | kA | Negative-Sequence Active Current |
m:I2Q:bus1 | kA | Negative-Sequence Reactive Current |
m:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1 | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:bus1 | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:bus1:Aper phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:z | p.u. | Shunt-Impedance |
c:cn | · | Connection Mode |
c:frnom | Hz | Nominal Frequency |
c:hpi | rad/s | Nominal Angular Frequency |
c:rs | p.u. | Rs |
c:gp | p.u. | Gp |
c:xl | p.u. | Xl |
c:bc1 | p.u. | Bc1 |
c:bc2 | p.u. | Bc2 |
c:uc1 | p.u. | Voltage across C1 |
c:uc2 | p.u. | Voltage across C2 |
c:uc | p.u. | Voltage across C1 and C2 |
c:url | p.u. | Voltage across Inductor (Rs-L) |
c:urp | p.u. | Voltage across Rp |
c:IL | A | Current through Inductor L |
c:IC | A | Current through C2 |
c:IRp | A | Current through Rp |
c:PRp | kW | Losses in Rp |
c:PL | kW | Losses in Inductor (Rs) |
c:Uc1 | kV | Voltage across C1 |
c:Uc2 | kV | Voltage across C2 |
c:Uc | kV | Voltage across C1 and C2 |
c:Url | kV | Voltage across Inductor (Rs-L) |
c:Urp | kV | Voltage across Rp |
c:ncapa | · | Number of Stages in Parallel |
c:acost | · | Annual Cost |
c:ncapx | · | Max. No. of Steps |
c:nCtrlIter | · | No. of CTRL-iterations |
c:Tctrl | · | Controller Time Constant |
c:Kctrl | p.u./% | Controller Sensitivity dq/dv |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
c:b0 | p.u. | sigmaC |
c:bc | p.u. | Bc |
c:gpc | p.u. | Gp(C) |
c:y0 | p.u. | Zero Sequence Admittance |
c:ze | p.u. | Grounding Impedance |
c:uc1ph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Capacitor C1(Phase Value) |
c:uc2ph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Capacitor C2(Phase Value) |
c:ucph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across C1 and C2(Phase Value) |
c:ucph | p.u. | Voltage across Capacitor (Phase Value) |
c:urlph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Rs-L (Phase Value) |
c:urlph | p.u. | Voltage across Inductor (Phase Value) |
c:urpph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Rp (Phase Value) |
c:ILph:Aper phase :A, :B, :C, unbalanced only | A | Current through Inductor L (Phase Value) |
c:ILph | A | Current through Inductor L (Phase Value) |
c:ICph:Aper phase :A, :B, :C, unbalanced only | A | Current through C2 (Phase Value) |
c:ICph | A | Current through Capacitor C (Phase Value) |
c:IRpph:Aper phase :A, :B, :C, unbalanced only | A | Current through Rp (Phase Value) |
c:IRpph | A | Current through Rp (Phase Value) |
c:Ustar | kV | Star-Point Voltage |
c:Uc1ph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Capacitor C1(Phase Value) |
c:Uc2ph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Capacitor C2(Phase Value) |
c:Ucph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across C1 and C2(Phase Value) |
c:Ucph | kV | Voltage across Capacitor (Phase Value) |
c:Urlph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Rs-L (Phase Value) |
c:Urlph | kV | Voltage across Inductor (Phase Value) |
c:Urpph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Rp (Phase Value) |
c:z0 | p.u. | Zero Sequence Impedance |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:bus1 | MW | Generation, Active Power |
n:Qgen:bus1 | Mvar | Generation, Reactive Power |
n:Pmot:bus1 | MW | Motor Load, Active Power |
n:Qmot:bus1 | Mvar | Motor Load, Reactive Power |
n:Pload:bus1 | MW | General Load, Active Power |
n:Qload:bus1 | Mvar | General Load, Reactive Power |
n:Pcomp:bus1 | MW | Compensation (Losses) |
n:Qcomp:bus1 | Mvar | Compensation |
n:Pnet:bus1 | MW | External Networks, Active Power |
n:Qnet:bus1 | Mvar | External Networks, Reactive Power |
n:Pflow:bus1 | MW | Power Flow, Active Power |
n:Qflow:bus1 | Mvar | Power Flow, Reactive Power |
n:Pout:bus1 | MW | Outgoing Flow, Active Power |
n:Qout:bus1 | Mvar | Outgoing Power, Reactive Power |
n:Sout:bus1 | MVA | Outgoing Power, Apparent Power |
n:cosphiout:bus1 | · | Outgoing Power, Power Factor |
n:Pbalance:bus1 | MW | Active Power Balance (=0) |
n:Qbalance:bus1 | Mvar | Reactive Power Balance (=0) |
n:LossPdown:bus1 | MW | Losses, downstream |
n:LossQdown:bus1 | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:bus1 | MW | Load losses, downstream |
n:LossQdownload:bus1 | Mvar | Load losses, downstream |
n:LossPdownnoload:bus1 | MW | No load losses, downstream |
n:LossQdownnoload:bus1 | Mvar | No load losses, downstream |
n:du_feed:bus1 | % | Difference from voltage at start of feeder |
n:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aper phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1 | kV | 3*U0 |
n:phiu0:bus1 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:bus1 | p.u. | Average-Voltage, Magnitude |
n:Um:bus1 | kV | Average-Voltage, Magnitude |
n:uphtmin:bus1 | p.u. | Minimum of Phase Technology dependent Voltage, Magnitude |
n:uphtmax:bus1 | p.u. | Maximum of Phase Technology dependent Voltage, Magnitude |
n:ubfac:bus1 | % | Unbalance Factor |
s:ncapain | · | Number of Stages in Parallel, input |
ElmShnt short-circuit results
Read after ComShc with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:I:bus1 | kA | Short-Circuit Current, Magnitude |
m:phii:bus1 | deg | Phase Current, Angle |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in Positive-Sequence System |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Ikss:bus1 | kA | Initial Short-Circuit Current |
m:ikss:bus1 | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:bus1 | MVA | Initial Short-Circuit Power |
m:ip:bus1 | kA | Peak Short-Circuit Current |
m:maxIkss:bus1 | kA | Max. Initial Short-Circuit Current |
m:maxip:bus1 | kA | Max. Peak Short-Circuit Current |
m:maxIth:bus1 | kA | Max. Thermal equivalent Short-Circuit Current |
m:maxIb:bus1 | kA | Max. Breaking Current |
m:R:bus1 | Ohm | Fault Impedance, Real Part |
m:X:bus1 | Ohm | Fault Impedance, Imaginary Part |
m:Z:bus1 | Ohm | Fault Impedance, Magnitude |
m:phiz:bus1 | deg | Fault Impedance, Angle |
m:Rs:bus1 | Ohm | Source Impedance, Real Part |
m:Xs:bus1 | Ohm | Source Impedance, Imaginary Part |
m:Zs:bus1 | Ohm | Source Impedance, Magnitude |
m:phizs:bus1 | deg | Source Impedance, Angle |
m:BrkIpload:bus1 | % | Breaker Loading (peak) |
m:Ib:bus1 | kA | Short-Circuit Breaking Current |
m:Sb:bus1 | MVA | Short-Circuit Breaking Power |
m:Ith:bus1 | kA | Thermal equivalent Short-Circuit Current |
m:zSbase:bus1 | p.u. | Fault Impedance, Magnitude |
m:XtoR:bus1 | · | X/R ratio |
m:cosphiui:bus1 | · | cosphi |
m:BrkIbload:bus1 | % | Breaker Loading (breaking) |
m:BrkmaxIb:bus1 | kA | Max. Breaking Current (breaker time) |
m:Ik:bus1 | kA | Steady-State Short-Circuit Current |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, Magnitude |
m:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1 | kA | 3*I0 |
m:phii0:bus1 | deg | Zero-Sequence Current, Angle |
m:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1 | deg | Negative-Sequence Current, Angle |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:P2:bus1 | MW | P2 |
m:Q2:bus1 | Mvar | Q2 |
m:P0:bus1 | MW | P0 |
m:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1 | deg | Angle between Voltage and Current in Zero-Sequence System |
m:phiu2i2:bus1 | deg | Angle between Voltage and Current in Negative-Sequence System |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:Ikss:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
m:ikss:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
m:Skssx3:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
m:ip:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
m:Z:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Fault Impedance, Magnitude |
m:phiz:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Fault Impedance, Angle |
m:Zl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Line-Line Fault Impedance, Magnitude |
m:phizl:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Fault Impedance, Angle |
m:Z0:bus1 | Ohm | Zero-Sequence Fault Impedance, Magnitude |
m:phiz0:bus1 | deg | Zero-Sequence Fault Impedance, Angle |
m:z0Sbase:bus1 | p.u. | Zero-Sequence Fault Impedance, Magnitude |
m:cosphiu1i1:bus1 | · | Positive-Sequence cosphi |
m:I0x3watt:bus1 | kA | Earth-Fault Residual Current |
m:I0x3var:bus1 | kA | Capacitive Earth-Fault Current |
m:Q0cap:bus1 | Mvar | Q0 capacitive |
m:Rfrel:bus1 | Ohm | Relay Impedance, Real Part |
m:Xfrel:bus1 | Ohm | Relay Impedance, Imaginary Part |
m:Zfrel:bus1 | Ohm | Relay Impedance, Magnitude |
m:phizfrel:bus1 | deg | Relay Impedance, Angle |
m:Zf:bus1 | Ohm | Meas. Fault Impedance, Magnitude |
m:phizf:bus1 | deg | Meas. Fault Impedance, Angle |
c:z | p.u. | Shunt-Impedance |
c:cn | · | Connection Mode |
c:frnom | Hz | Nominal Frequency |
c:hpi | rad/s | Nominal Angular Frequency |
c:rs | p.u. | Rs |
c:gp | p.u. | Gp |
c:xl | p.u. | Xl |
c:uc1 | p.u. | Voltage across C1 |
c:uc2 | p.u. | Voltage across C2 |
c:uc | p.u. | Voltage across C1 and C2 |
c:url | p.u. | Voltage across Inductor (Rs-L) |
c:urp | p.u. | Voltage across Rp |
c:IL | A | Current through Inductor L |
c:IC | A | Current through C2 |
c:IRp | A | Current through Rp |
c:PRp | kW | Losses in Rp |
c:PL | kW | Losses in Inductor (Rs) |
c:Uc1 | kV | Voltage across C1 |
c:Uc2 | kV | Voltage across C2 |
c:Uc | kV | Voltage across C1 and C2 |
c:Url | kV | Voltage across Inductor (Rs-L) |
c:Urp | kV | Voltage across Rp |
c:ncapa | · | Number of Stages in Parallel |
c:b0 | p.u. | Susceptance to Ground |
c:uha_c1 | p.u. | Harmonic Voltage (arith.) across C1 |
c:uhrms_c1 | p.u. | Harmonic Voltage (RMS) across C1 |
c:ut_c1 | p.u. | Total Voltage (u_fn+uhrms) across C1 |
c:ufn_c1 | p.u. | Fundamental Frequency Voltage across C1 |
c:uha_c2 | p.u. | Harmonic Voltage (arith.) across C2 |
c:uhrms_c2 | p.u. | Harmonic Voltage (RMS) across C2 |
c:ut_c2 | p.u. | Total Voltage (u_fn+uhrms) across C2 |
c:ufn_c2 | p.u. | Fundamental Frequency Voltage across C2 |
c:uha_c | p.u. | Harmonic Voltage (arith.) across C1 and C2 |
c:uhrms_c | p.u. | Harmonic Voltage (RMS) across C1 and C2 |
c:ut_c | p.u. | Total Voltage (u_fn+uhrms) across C1 and C2 |
c:ufn_c | p.u. | Fundamental Frequency Voltage across C1 and C2 |
c:uha_rl | p.u. | Harmonic Voltage (arith.) across Inductor (Rs-L) |
c:uhrms_rl | p.u. | Harmonic Voltage (rms) across Inductor (Rs-L) |
c:ut_rl | p.u. | Total Voltage (u_fn+uhrms) across Inductor (Rs-L) |
c:Ihrms_L | A | Harmonic Current (rms) through Inductor (Rs-L) |
c:Irms_L | A | RMS Value of Current through Inductor (Rs-L) |
c:Ihrms_Rp | A | Harmonic Current (rms) through Rp |
c:Irms_Rp | A | RMS Value of Current through Rp |
c:Ph_Rp | kW | Harmonic Losses of Rp |
c:Pt_Rp | kW | Total Losses of Rp |
c:Ph_L | kW | Harmonic Losses of Inductor (Rs) |
c:Pt_L | kW | Total Losses of Inductor |
c:ufn_rl | p.u. | Fundamental Frequency Voltage across Inductor (Rs-L) |
c:Ifn_Rp | A | Fundamental Frequency Current through Rp |
c:Ifn_L | A | Fundamental Frequency Current through Inductor (Rs-L) |
c:Pfn_L | kW | Fundamental Frequency Losses of Inductor |
c:Pfn_Rp | kW | Fundamental Frequency Losses of Rp |
c:Ifn_c | A | Fundamental Frequency Current through Capacitor C2 |
c:Ihrms_c | A | Harmonic Current (rms) through Capacitor C2 |
c:Irms_c | A | RMS Value of Current through Capacitor C2 |
c:C1 | uF | Auxiliary Capacitance C1 |
c:C2 | uF | Main Capacitance C2 |
c:L | mH | Inductance L |
c:Rp | Ohm | Parallel-Resistance Rp |
c:Rs | Ohm | Resistance Rs |
c:Uha_c1 | kV | Harmonic Voltage (arith.) across C1 |
c:Uhrms_c1 | kV | Harmonic Voltage (RMS) across C1 |
c:Ut_c1 | kV | Total Voltage (U_fn+Uhrms) across C1 |
c:Ufn_c1 | kV | Fundamental Frequency Voltage across C1 |
c:Uha_c2 | kV | Harmonic Voltage (arith.) across C2 |
c:Uhrms_c2 | kV | Harmonic Voltage (RMS) across C2 |
c:Ut_c2 | kV | Total Voltage (U_fn+Uhrms) across C2 |
c:Ufn_c2 | kV | Fundamental Frequency Voltage across C2 |
c:Uha_c | kV | Harmonic Voltage (arith.) across C1 and C2 |
c:Uhrms_c | kV | Harmonic Voltage (RMS) across C1 and C2 |
c:Ut_c | kV | Total Voltage (U_fn+Uhrms) across C1 and C2 |
c:Ufn_c | kV | Fundamental Frequency Voltage across C1 and C2 |
c:Uha_rl | kV | Harmonic Voltage (arith.) across Inductor (Rs-L) |
c:Uhrms_rl | kV | Harmonic Voltage (rms) across Inductor (Rs-L) |
c:Ut_rl | kV | Total Voltage (U_fn+Uhrms) across Inductor (Rs-L) |
c:Ufn_rl | kV | Fundamental Frequency Voltage across Inductor (Rs-L) |
c:bc | p.u. | Bc |
c:gpc | p.u. | Gp(C) |
c:C | uF | Capacitance C |
c:y0 | p.u. | Zero Sequence Admittance |
c:ze | p.u. | Grounding Impedance |
c:uc1ph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across C1 (Phase Value) |
c:uc2ph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across C2 (Phase Value) |
c:ucph:Aper phase :A, :B, :C, unbalanced only | p.u. | uc1 |
c:ucph | p.u. | Voltage across Capacitor (Phase Value) |
c:urlph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Inductor (Phase Value) |
c:urlph | p.u. | Voltage across Inductor (Phase Value) |
c:urpph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Rp (Phase Value) |
c:ILph:Aper phase :A, :B, :C, unbalanced only | A | Current through Inductor (Phase Value) |
c:ILph | A | Current through Inductor (Phase Value) |
c:ICph:Aper phase :A, :B, :C, unbalanced only | A | Current through C2 (Phase Value) |
c:ICph | A | Current through Capacitor C(Phase Value) |
c:IRpph:Aper phase :A, :B, :C, unbalanced only | A | Current through Rp (Phase Value) |
c:IRpph | A | Current through Rp (Phase Value) |
c:Ustar | kV | Star-Point Voltage |
c:Uc1ph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across C1 (Phase Value) |
c:Uc2ph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across C2 (Phase Value) |
c:Ucph:Aper phase :A, :B, :C, unbalanced only | kV | Url |
c:Ucph | kV | Voltage across Capacitor (Phase Value) |
c:Urlph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Inductor (Phase Value) |
c:Urlph | kV | Voltage across Inductor (Phase Value) |
c:Urpph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Rp (Phase Value) |
c:ncapx | · | Max. No. of Steps |
c:i_earth | · | Internal |
c:Uhaph_c1:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Ufnph_c1:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Uhaph_c2:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Ufnph_c2:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Uhaph_c:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Uhaph_c | kV | sigmaC |
c:Ufnph_c:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Ufnph_c | kV | sigmaC |
c:Uhaph_rl:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Uhaph_rl | kV | sigmaC |
c:Ufnph_rl:Aper phase :A, :B, :C, unbalanced only | kV | sigmaC |
c:Ufnph_rl | kV | sigmaC |
c:z0 | p.u. | Zero Sequence Impedance |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Ikss:bus1 | kA | Initial Short-Circuit Current |
n:I:bus1 | kA | Short-Circuit Current |
n:phii:bus1 | deg | Phase Current, Angle |
n:Skss:bus1 | MVA | Initial Short-Circuit Power |
n:ip:bus1 | kA | Peak Short-Circuit Current |
n:Ib:bus1 | kA | Short-Circuit Breaking Current |
n:Sb:bus1 | MVA | Short-Circuit Breaking Power |
n:idc:bus1 | kA | Decaying Component |
n:Ith:bus1 | kA | Thermal equivalent Short-Circuit Current |
n:R1toX1:bus1 | · | R1/X1 ratio (Zk") |
n:X1toR1:bus1 | · | X1/R1 ratio (Zk") |
n:R:bus1 | Ohm | Short-Circuit Impedance, Real Part |
n:X:bus1 | Ohm | Short-Circuit Impedance, Imaginary Part |
n:Z:bus1 | Ohm | Short-Circuit Impedance, Magnitude |
n:phiz:bus1 | deg | Short-Circuit Impedance, Angle |
n:urpref:bus1 | p.u. | Pre-fault Voltage, Real Part |
n:uipref:bus1 | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:bus1 | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:bus1 | % | Pre-fault Voltage, Magnitude |
n:Upref:bus1 | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:bus1 | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:bus1 | deg | Pre-fault Voltage, Angle |
n:phiui:bus1 | deg | Angle between Voltage and Current |
n:Ithload:bus1 | % | Loading, Thermal equivalent Current |
n:Ipload:bus1 | % | Loading, Peak Short-Circuit Current |
n:Ithrtk:bus1 | kA | Rated Short-Time Current (Tk) |
n:XtoR:bus1 | · | X/R ratio (peak) |
n:RtoX:bus1 | · | R/X ratio (peak) |
n:XtoR_b:bus1 | · | X/R ratio (dc) |
n:RtoX_b:bus1 | · | R/X ratio (dc) |
n:fctof_b:bus1 | · | Equivalent Frequency fc/f (dc) |
n:rSbase:bus1 | p.u. | Short-Circuit Impedance, Real Part |
n:xSbase:bus1 | p.u. | Short-Circuit Impedance, Imaginary Part |
n:zSbase:bus1 | p.u. | Short-Circuit Impedance, Magnitude |
n:Tn:bus1 | ms | Grid Time Constant |
n:Ik:bus1 | kA | Steady-State Short-Circuit Current |
n:cfac:bus1 | · | Voltage Factor |
n:Iasy:bus1 | kA | Asymmetrical Breaking Current |
n:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aper phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1 | kV | 3*U0 |
n:phiu0:bus1 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:Ikss:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
n:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
n:Skss:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
n:Skssx3:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
n:ip:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
n:Ib:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Breaking Current |
n:Sb:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Short-Circuit Breaking Power |
n:Ith:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Thermal equivalent Short-Circuit Current |
n:Ithmax:bus1 | kA | Max. Thermal equivalent Short-Circuit Current |
n:R0:bus1 | Ohm | Zero-Sequence Impedance, Real Part |
n:X0:bus1 | Ohm | Zero-Sequence Impedance, Imaginary Part |
n:Z0:bus1 | Ohm | Zero-Sequence Impedance, Magnitude |
n:phiz0:bus1 | deg | Zero-Sequence Impedance, Angle |
n:r0Sbase:bus1 | p.u. | Zero-Sequence Impedance, Real Part |
n:x0Sbase:bus1 | p.u. | Zero-Sequence Impedance, Imaginary Part |
n:z0Sbase:bus1 | p.u. | Zero-Sequence Impedance, Magnitude |
n:R1:bus1 | Ohm | Positive-Sequence Impedance, Real Part |
n:X1:bus1 | Ohm | Positive-Sequence Impedance, Imaginary Part |
n:Z1:bus1 | Ohm | Positive-Sequence Impedance, Magnitude |
n:phiz1:bus1 | deg | Positive-Sequence Impedance, Angle |
n:r1Sbase:bus1 | p.u. | Positive-Sequence Impedance, Real Part |
n:x1Sbase:bus1 | p.u. | Positive-Sequence Impedance, Imaginary Part |
n:z1Sbase:bus1 | p.u. | Positive-Sequence Impedance, Magnitude |
n:R2:bus1 | Ohm | Negative-Sequence Impedance, Real Part |
n:X2:bus1 | Ohm | Negative-Sequence Impedance, Imaginary Part |
n:Z2:bus1 | Ohm | Negative-Sequence Impedance, Magnitude |
n:phiz2:bus1 | deg | Negative-Sequence Impedance, Angle |
n:r2Sbase:bus1 | p.u. | Negative-Sequence Impedance, Real Part |
n:x2Sbase:bus1 | p.u. | Negative-Sequence Impedance, Imaginary Part |
n:z2Sbase:bus1 | p.u. | Negative-Sequence Impedance, Magnitude |
n:R0toX0:bus1 | · | R0/X0 ratio (Zk") |
n:X0toR0:bus1 | · | X0/R0 ratio (Zk") |
n:R2toX2:bus1 | · | R2/X2 ratio (Zk") |
n:X2toR2:bus1 | · | X2/R2 ratio (Zk") |
n:R:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Ground |
n:X:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Ground |
n:Z:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Ground |
n:phiz:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Ground |
n:Rl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Line |
n:Xl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Line |
n:Zl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Line |
n:phizl:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Line |
n:Rln:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Neutral |
n:Xln:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Neutral |
n:Zln:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Neutral |
n:phizln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Neutral |
n:Rn:bus1 | Ohm | Network Resistance, Neutral |
n:Xn:bus1 | Ohm | Network Reactance, Neutral |
n:Zn:bus1 | Ohm | Network Impedance, Neutral |
n:phizn:bus1 | deg | Angle of Network Impedance, Neutral |
n:eff:bus1:Aper phase :A, :B, :C, unbalanced only | · | Earth Fault Factor |
n:X0toX1:bus1 | · | X0/X1 |
n:In:bus1 | kA | Neutral Current, Magnitude |
n:phiin:bus1 | deg | Neutral Current, Angle |
n:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
n:I0x3:bus1 | kA | 3*I0 |
n:phii0:bus1 | deg | Zero-Sequence Current, Angle |
n:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
n:phii1:bus1 | deg | Positive-Sequence Current, Angle |
n:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
n:phii2:bus1 | deg | Negative-Sequence Current, Angle |
n:urpref:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Real Part |
n:uipref:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Pre-fault Voltage, Magnitude |
n:Upref:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Pre-fault Voltage, Angle |
n:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
n:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
n:phiu2i2:bus1 | deg | Angle between Voltage and Current in negative sequence system |
n:phiu0i0:bus1 | deg | Angle between Voltage and Current in zero-sequence system |
n:Ik:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Steady-State Short-Circuit Current |
n:in:bus1 | p.u. | Neutral Current, Magnitude |
n:i0r:bus1 | p.u. | Zero-Sequence Current, Real Part |
n:i0i:bus1 | p.u. | Zero-Sequence Current, Imaginary Part |
n:i0:bus1 | p.u. | Zero-Sequence Current, Magnitude |
n:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
n:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
n:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
n:i2r:bus1 | p.u. | Negative-Sequence Current, Real Part |
n:i2i:bus1 | p.u. | Negative-Sequence Current, Imaginary Part |
n:i2:bus1 | p.u. | Negative-Sequence Current, Magnitude |
ElmShnt rms simulation results
Read after ComInc (RMS) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1 | p.u. | Current, Magnitude, referred to network |
m:I:bus1 | kA | Current, Magnitude |
m:phii:bus1 | deg | Current, Angle |
m:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:S:bus1 | MVA | Apparent Power |
m:cosphi:bus1 | · | Power Factor |
m:tanphi:bus1 | · | tan(phi) |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:Ssum:bus1 | MVA | Total Apparent Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:tanphisum:bus1 | · | Total tan(phi) |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:ur:bus1 | p.u. | Voltage, Real Part |
m:ui:bus1 | p.u. | Voltage, Imaginary Part |
m:u:bus1 | p.u. | Voltage, Magnitude |
m:ir:bus1 | p.u. | Current, Real Part |
m:ii:bus1 | p.u. | Current, Imaginary Part |
m:i:bus1 | p.u. | Current, Magnitude |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Brkload:bus1 | % | Breaker Loading |
m:Spu:bus1 | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:bus1 | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:bus1 | deg | Zero-Sequence-Voltage, Angle |
m:u2:bus1 | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:bus1 | deg | Negative-Sequence-Voltage, Angle |
m:irnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:iinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:inet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:bus1 | p.u. | Zero-Sequence Current, Real Part |
m:i0i:bus1 | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:bus1 | p.u. | Zero-Sequence Current, Magnitude |
m:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1 | kA | 3*I0 |
m:phii0:bus1 | deg | Zero-Sequence Current, Angle |
m:i2r:bus1 | p.u. | Negative-Sequence Current, Real Part |
m:i2i:bus1 | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:bus1 | p.u. | Negative-Sequence Current, Magnitude |
m:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1 | deg | Negative-Sequence Current, Angle |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:bus1 | MW | Positive Sequence Active Power |
m:Q1:bus1 | Mvar | Positive Sequence Reactive Power |
m:P2:bus1 | MW | Negative Sequence Active Power |
m:Q2:bus1 | Mvar | Negative Sequence Reactive Power |
m:P0:bus1 | MW | Zero Sequence Active Power |
m:Q0:bus1 | Mvar | Zero Sequence Reactive Power |
m:i2P:bus1 | p.u. | Negative-Sequence Active Current |
m:i2Q:bus1 | p.u. | Negative-Sequence Reactive Current |
m:I2P:bus1 | kA | Negative-Sequence Active Current |
m:I2Q:bus1 | kA | Negative-Sequence Reactive Current |
m:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1 | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:bus1 | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:bus1:Aper phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:z | p.u. | Shunt-Impedance |
c:cn | · | Connection Mode |
c:frnom | Hz | Nominal Frequency |
c:hpi | rad/s | Nominal Angular Frequency |
c:ncapa | · | Number of Stages in Parallel |
c:ncapx | · | Max. No. of Steps |
c:b0 | p.u. | sigmaC |
c:shtype | · | Type |
c:L | H | Inductance |
c:Rs | Ohm | Series-Resistance |
c:Qmax | Mvar | Max. Rated Reactive Power |
c:C | F | Capacitance |
c:Gp | S | Parallel-Conductance |
c:y0 | p.u. | Zero Sequence Admittance |
c:ze | p.u. | Grounding Impedance |
c:Ustar | kV | Star-Point Voltage |
c:i_earth | · | Internal |
c:z0 | p.u. | Zero Sequence Impedance |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:ishc:bus1 | p.u. | Short-Circuit Current, magnitude |
n:Ishc:bus1 | kA | Short-Circuit Current, magnitude |
n:fe:bus1 | p.u. | Electrical Frequency |
n:dfehz:bus1 | Hz | Deviation of the El. Frequency |
n:fehz:bus1 | Hz | Electrical Frequency |
n:frnom:bus1 | Hz | Nominal Frequency |
n:ishcr:bus1 | p.u. | Short-Circuit Current, real |
n:ishci:bus1 | p.u. | Short-Circuit Current, imag |
n:dfedt:bus1 | p.u./s | Derivative of El. Frequency |
n:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aper phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1 | kV | 3*U0 |
n:phiu0:bus1 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:bus1 | p.u. | Average-Voltage, Magnitude |
n:Um:bus1 | kV | Average-Voltage, Magnitude |
n:ishc:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, magnitude |
n:Ishc:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, magnitude |
n:inshc:bus1 | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:bus1 | kA | Neutral Short-Circuit Current, magnitude |
n:ishcr:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, real |
n:ishci:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, imag |
s:u_r | p.u. | Voltage, Real Part |
s:u_i | p.u. | Voltage, Imaginary Part |
s:i_r | p.u. | Current, Real Part |
s:i_i | p.u. | Current, Imaginary Part |
s:IRL | kA | Current through Inductance |
s:UC | kV | Voltage at Capacitance |
ElmShnt emt simulation results
Read after ComInc (EMT) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:u0:bus1 | p.u. | Zero-Sequence-Voltage |
m:u1r:bus1 | p.u. | Voltage Phasor, Real Part |
m:u1i:bus1 | p.u. | Voltage Phasor, Imaginary Part |
m:u1:bus1 | p.u. | Voltage Phasor, Magnitude |
m:U1:bus1 | kV | Line-Ground Voltage Phasor, Magnitude |
m:U1l:bus1 | kV | Line-Line Voltage Phasor, Magnitude |
m:phiu1:bus1 | deg | Voltage Phasor, Angle |
m:inet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, referred to network |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Phase Current |
m:i0:bus1 | p.u. | Zero-Sequence Current |
m:I0:bus1 | kA | Zero-Sequence Current |
m:I0x3:bus1 | kA | 3*I0 |
m:i1r:bus1 | p.u. | Current Phasor, Real Part |
m:i1i:bus1 | p.u. | Current Phasor, Imaginary Part |
m:i1:bus1 | p.u. | Current Phasor, Magnitude |
m:I1:bus1 | kA | Current Phasor, Magnitude |
m:phii1:bus1 | deg | Current Phasor, Angle |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Psum:bus1 | MW | Power-Phasor, Active Power |
m:Qsum:bus1 | Mvar | Power Phasor, Reactive Part |
m:Ssum:bus1 | MVA | Power Phasor, Apparent Power |
m:i1P:bus1 | p.u. | Current Phasor, Active Current |
m:i1Q:bus1 | p.u. | Current Phasor, Reactive Current |
m:I1P:bus1 | kA | Current Phasor, Active Current |
m:I1Q:bus1 | kA | Current Phasor, Reactive Current |
m:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
m:i:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current Phasor |
m:Tfct:bus1 | s | Fault Clearing Time |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:unet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, referred to network |
m:cosphi1:bus1 | · | Power-Phasor, Power-Factor |
c:cn | · | Connection Mode |
c:frnom | Hz | Nominal Frequency |
c:hpi | rad/s | Nominal Angular Frequency |
c:rs | p.u. | Series-Resistance |
c:gp | p.u. | Parallel-Resistance |
c:uc1ph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across C1 (Phase Value) |
c:uc2ph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across C2 (Phase Value) |
c:ucph:Aper phase :A, :B, :C, unbalanced only | p.u. | Uc1ph |
c:ucph | p.u. | Voltage across Capacitor (Phase Value) |
c:urlph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Inductor (Phase Value) |
c:urlph | p.u. | Voltage across Inductor (Phase Value) |
c:urpph:Aper phase :A, :B, :C, unbalanced only | p.u. | Voltage across Rp (Phase Value) |
c:ILph:Aper phase :A, :B, :C, unbalanced only | A | Current through Inductor L (Phase Value) |
c:ILph | A | Current through Inductor L (Phase Value) |
c:ICph:Aper phase :A, :B, :C, unbalanced only | A | Current through Capacitor C2 (Phase Value) |
c:ICph | A | Current through Capacitor C (Phase Value) |
c:IRpph:Aper phase :A, :B, :C, unbalanced only | A | Current through Rp (Phase Value) |
c:IRpph | A | Current through Rp (Phase Value) |
c:Ustar | kV | Star-Point Voltage |
c:Uc1ph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Capacitor C1(Phase Value) |
c:Uc2ph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Capacitor C2(Phase Value) |
c:Ucph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across C1 and C2(Phase Value) |
c:Ucph | kV | Voltage across Capacitor (Phase Value) |
c:Urlph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Rs-L (Phase Value) |
c:Urlph | kV | Voltage across Inductor (Phase Value) |
c:Urpph:Aper phase :A, :B, :C, unbalanced only | kV | Voltage across Rp (Phase Value) |
c:ncapa | · | Number of Stages in Parallel |
c:ncapx | · | Max. No. of Steps |
c:i_earth | · | Internal |
c:l | p.u. | Inductance |
c:c | p.u. | Capacitance |
c:le | p.u. | Grounding Inductance |
c:re | p.u. | Grounding Resistance |
c:c0 | p.u. | Parasitic Capacitance |
c:c1 | p.u. | Capacitance C1 |
c:c2 | p.u. | Capacitance C2 |
c:Unom | kV | Nominal Voltage |
c:Snom | MVA | Nominal Power |
c:shtype | · | Type |
c:iRL:Aper phase :A, :B, :C, unbalanced only | p.u. | Current through Inductance |
c:iRL | p.u. | Current through Inductance |
c:L | H | Inductance |
c:Rs | Ohm | Series-Resistance |
c:Qmax | Mvar | Max. Rated Reactive Power |
c:rs0 | p.u. | Zero Sequence Series-Resistance |
c:l0 | p.u. | Zero Sequence Inductance |
c:physt | kW | Hysteresis losses at rated operation |
c:C | F | Capacitance |
c:Gp | S | Parallel-Conductance |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Phase Voltage |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Voltage |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage |
n:u0:bus1 | p.u. | Zero-Sequence-Voltage |
n:U0:bus1 | kV | Zero-Sequence-Voltage |
n:U0x3:bus1 | kV | 3*U0 |
n:u1:bus1 | p.u. | Voltage Phasor, Magnitude |
n:u1pc:bus1 | % | Voltage Phasor, Magnitude |
n:u1r:bus1 | p.u. | Voltage Phasor, Real Part |
n:u1i:bus1 | p.u. | Voltage Phasor, Imaginary Part |
n:U1:bus1 | kV | Voltage Phasor, Magnitude |
n:phiu1:bus1 | deg | Voltage Phasor, Angle |
n:U1l:bus1 | kV | Line-Line Voltage Phasor, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage |
n:un:bus1 | p.u. | Neutral-Ground Voltage |
n:Un:bus1 | kV | Neutral-Ground Voltage |
n:ishc:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current |
n:Ishc:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:inshc:bus1 | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:bus1 | kA | Neutral Short-Circuit Current, magnitude |
n:fe:bus1 | p.u. | Electrical Frequency |
n:dfehz:bus1 | Hz | Deviation of the El. Frequency |
n:fehz:bus1 | Hz | Electrical Frequency |
n:frnom:bus1 | Hz | Nominal Frequency |
s:psil_d | p.u. | Flux, alpha-component |
s:psil_q | p.u. | Flux, beta-component |
s:psil_0 | p.u. | Flux, gamma-component |
s:uC1_a | p.u. | Voltage C1, Phase a |
s:uC1_b | p.u. | Voltage C1, Phase b |
s:uC1_c | p.u. | Voltage C1, Phase c |
s:uC2_a | p.u. | Voltage C2, Phase a |
s:uC2_b | p.u. | Voltage C2, Phase b |
s:uC2_c | p.u. | Voltage C2, Phase c |
s:psil_a | p.u. | Flux, Phase a |
s:psil_b | p.u. | Flux, Phase b |
s:psil_c | p.u. | Flux, Phase c |
s:uC_a | p.u. | Voltage at Capacitance, Phase a |
s:uC_b | p.u. | Voltage at Capacitance, Phase b |
s:uC_c | p.u. | Voltage at Capacitance, Phase c |
s:IRL | kA | Current through Inductance |
s:UC | kV | Voltage at Capacitance |
ElmShnt dc load flow results
Read after ComLdf (DC) with GetAttribute. m: currents, voltages and powers, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:Pgen:bus1 | MW | Generation, Active Power |
n:Pmot:bus1 | MW | Motor Load, Active Power |
n:Pload:bus1 | MW | General Load, Active Power |
n:Pcomp:bus1 | MW | Compensation (Losses) |
n:Pnet:bus1 | MW | External Networks, Active Power |
n:Pflow:bus1 | MW | Power Flow, Active Power |
ElmShnt modal analysis results
Read after ComMod with GetAttribute. c: calculation parameter, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
c:z | p.u. | Shunt-Impedance |
c:cn | · | Connection Mode |
c:frnom | Hz | Nominal Frequency |
c:hpi | rad/s | Nominal Angular Frequency |
c:ncapa | · | Number of Stages in Parallel |
c:ncapx | · | Max. No. of Steps |
c:b0 | p.u. | sigmaC |
c:shtype | · | Type |
c:L | H | Inductance |
c:Rs | Ohm | Series-Resistance |
c:Qmax | Mvar | Max. Rated Reactive Power |
c:C | F | Capacitance |
c:Gp | S | Parallel-Conductance |
s:u_r | p.u. | Voltage, Real Part |
s:u_i | p.u. | Voltage, Imaginary Part |
s:i_r | p.u. | Current, Real Part |
s:i_i | p.u. | Current, Imaginary Part |
s:IRL | kA | Current through Inductance |
s:UC | kV | Voltage at Capacitance |
ElmShnt optimal power flow results
Read after ComOpf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1 | p.u. | Current, Magnitude, referred to network |
m:I:bus1 | kA | Current, Magnitude |
m:phii:bus1 | deg | Current, Angle |
m:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:S:bus1 | MVA | Apparent Power |
m:cosphi:bus1 | · | Power Factor |
m:tanphi:bus1 | · | tan(phi) |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:Ssum:bus1 | MVA | Total Apparent Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:tanphisum:bus1 | · | Total tan(phi) |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:ur:bus1 | p.u. | Voltage, Real Part |
m:ui:bus1 | p.u. | Voltage, Imaginary Part |
m:u:bus1 | p.u. | Voltage, Magnitude |
m:ir:bus1 | p.u. | Current, Real Part |
m:ii:bus1 | p.u. | Current, Imaginary Part |
m:i:bus1 | p.u. | Current, Magnitude |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Brkload:bus1 | % | Breaker Loading |
m:Spu:bus1 | MVA/p.u. | Apparent Power per p.u. Voltage |
c:z | p.u. | Shunt-Impedance |
c:cn | · | Connection Mode |
c:frnom | Hz | Nominal Frequency |
c:hpi | rad/s | Nominal Angular Frequency |
c:rs | p.u. | Rs |
c:gp | p.u. | Gp |
c:xl | p.u. | Xl |
c:bc1 | p.u. | Bc1 |
c:bc2 | p.u. | Bc2 |
c:uc1 | p.u. | Voltage across C1 |
c:uc2 | p.u. | Voltage across C2 |
c:uc | p.u. | Voltage across C1 and C2 |
c:url | p.u. | Voltage across Inductor (Rs-L) |
c:urp | p.u. | Voltage across Rp |
c:IL | A | Current through Inductor L |
c:IC | A | Current through C2 |
c:IRp | A | Current through Rp |
c:PRp | kW | Losses in Rp |
c:PL | kW | Losses in Inductor (Rs) |
c:Uc1 | kV | Voltage across C1 |
c:Uc2 | kV | Voltage across C2 |
c:Uc | kV | Voltage across C1 and C2 |
c:Url | kV | Voltage across Inductor (Rs-L) |
c:Urp | kV | Voltage across Rp |
c:ncapa | · | Number of Stages in Parallel |
c:acost | · | Annual Cost |
c:ncapx | · | Max. No. of Steps |
c:nCtrlIter | · | No. of CTRL-iterations |
c:Tctrl | · | Controller Time Constant |
c:Kctrl | p.u./% | Controller Sensitivity dq/dv |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
c:b0 | p.u. | sigmaC |
c:ncapaTarget | · | Number of Stages in Parallel - target value |
c:totPenaltyCosts | USD | Total penalty costs |
c:totTapDeviation | · | Total tap deviation |
c:bc | p.u. | Bc |
c:gpc | p.u. | Gp(C) |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:bus1 | MW | Generation, Active Power |
n:Qgen:bus1 | Mvar | Generation, Reactive Power |
n:Pmot:bus1 | MW | Motor Load, Active Power |
n:Qmot:bus1 | Mvar | Motor Load, Reactive Power |
n:Pload:bus1 | MW | General Load, Active Power |
n:Qload:bus1 | Mvar | General Load, Reactive Power |
n:Pcomp:bus1 | MW | Compensation (Losses) |
n:Qcomp:bus1 | Mvar | Compensation |
n:Pnet:bus1 | MW | External Networks, Active Power |
n:Qnet:bus1 | Mvar | External Networks, Reactive Power |
n:Pflow:bus1 | MW | Power Flow, Active Power |
n:Qflow:bus1 | Mvar | Power Flow, Reactive Power |
n:Pout:bus1 | MW | Outgoing Flow, Active Power |
n:Qout:bus1 | Mvar | Outgoing Power, Reactive Power |
n:Sout:bus1 | MVA | Outgoing Power, Apparent Power |
n:cosphiout:bus1 | · | Outgoing Power, Power Factor |
n:Pbalance:bus1 | MW | Active Power Balance (=0) |
n:Qbalance:bus1 | Mvar | Reactive Power Balance (=0) |
n:LossPdown:bus1 | MW | Losses, downstream |
n:LossQdown:bus1 | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:bus1 | MW | Load losses, downstream |
n:LossQdownload:bus1 | Mvar | Load losses, downstream |
n:LossPdownnoload:bus1 | MW | No load losses, downstream |
n:LossQdownnoload:bus1 | Mvar | No load losses, downstream |
n:du_feed:bus1 | % | Difference from voltage at start of feeder |
ElmShnt basic data
b: values are worked out from the input data. Read them; they are not set.
| Attribute | Unit | Description |
|---|---|---|
b:loc_name | · | Name |