ElmXnet attributesPowerFactory External Grid
Every attribute of the PowerFactory External Grid (ElmXnet): 284 input parameters and 980 result variables, with units and meaning. Copy a name into GetAttribute or SetAttribute.
What ElmXnet is
An external grid: the network beyond the edge of the model, set by its short-circuit power and a voltage setpoint. It is often the slack of the load flow.
- Class
ElmXnet, element class- PowerFactory name
- External Grid
- Terminal suffix
:bus1terminal- Attributes
- 284 input parameters and 980 result variables, in 7 calculations
Most used ElmXnet attributes
| Attribute | Unit | Description | Where |
|---|---|---|---|
m:P:bus1 | MW | Active Powerslack active power | Load flow |
m:Q:bus1 | Mvar | Reactive Power | Load flow |
bustp | · | Bus TypeSL, PV or PQ | input data |
usetp | p.u. | Voltage Setpoint | input data |
snss | MVA | Short-Circuit Power Sk''maxmaximum short-circuit power | input data |
snssmin | MVA | Short-Circuit Power Sk''min | input data |
outserv | · | Out of Service | input data |
Read and write ElmXnet in Python
import powerfactory
app = powerfactory.GetApplication() # GetApplicationExt() from outside PowerFactory
app.GetFromStudyCase("ComLdf").Execute() # results exist after a calculation
for grid in app.GetCalcRelevantObjects("*.ElmXnet"):
p_bus1 = grid.GetAttribute("m:P:bus1") # Active Power, MW
q_bus1 = grid.GetAttribute("m:Q:bus1") # Reactive Power, Mvar
print(grid.loc_name, p_bus1, q_bus1)
grid = app.GetCalcRelevantObjects("*.ElmXnet")[0]
grid.SetAttribute("usetp", 1.02) # voltage setpoint 1.02 p.u.- A result at a terminal of the external grid needs the terminal in its name:
m:P:bus1, notm:P, which raisesAttributeError. - An input parameter is read and written with or without its
e:prefix:GetAttribute("outserv")andGetAttribute("e:outserv")give the same value. - RMS and EMT variables change over time: record them in a results object (
ElmRes) to read the whole curve.GetAttributeafter a run gives the value at the last time step.
- Input parameters284
- Load flow results202
- Short-circuit results250
- RMS simulation results214
- EMT simulation results117
- DC load flow results27
- Modal analysis results55
- Optimal power flow results115
- Basic data1
ElmXnet input parameters
The element data, as typed in GetAttribute and SetAttribute (the e: prefix is optional). Setting one changes the model.
| Attribute | Unit | Description |
|---|---|---|
loc_name | · | Name |
chr_name | · | Characteristic Name |
for_name | · | Foreign Key |
dat_src | · | Data source |
sernum | · | Serial Number |
manuf | · | Manufacturer |
commissionDate | · | Commissioning Date |
appr_modby | · | Modified by |
bustp | · | Bus Type |
mode_inp | · | Input Mode |
outserv | · | Out of Service |
constr | · | Year of Construction |
appr_status | · | Status |
cused | · | Use for calculation |
cusedhrm | · | Use for calculation |
iintgnd | · | N-Connection |
priority | · | Merit Order |
fixed | · | Must run |
dispatch | · | Generator Dispatch |
iInterPol | · | Approximation |
ictpg | · | Active Power |
ictqg | · | Reactive Power |
iOPFCPmin | · | Min. |
iOPFCPmax | · | Max. |
iOPFCQmin | · | Min. |
iOPFCQmax | · | Max. |
QtargetBase | · | Base |
isVRE | · | Generator usage |
isCtrlP | · | Active power |
isCtrlQ | · | Reactive power |
isLimPmax | · | Max. |
isLimPmin | · | Min. |
isLimQmax | · | Max. |
isLimQmin | · | Min. |
isMustRunUC | · | Must run |
isCtrlFixedToLdfVal | · | Fix controls to Load Flow values |
is4SpinReserve | · | Consider for region spinning reserve |
allowConsumMode | · | Separate consumption mode |
isConsCostOp | · | Operating costs |
discMethCostOp | · | Piecewise linearisation for LP |
numBreakpointsCostOp | · | Number of breakpoints |
isConsCostsRedispatch | · | Additional active power redispatch costs |
isConsStartUpCost | · | Start-up costs |
isConsShutDownCost | · | Shut-down costs |
isConstrRamp | · | Ramp rate constraints |
isConstrUpDown | · | Start-up/shut-down time constraints |
isDiscreteCtrlP | · | Restriction to discrete active power values |
isPcurrAllowed | · | Allow current active power value |
consCostsRedispatchQ | · | Additional reactive power redispatch costs |
refValueQ | · | Reference value for redispatch costs |
refValueLdfQ | · | Reference value for redispatch costs |
refValueV | · | Reference value for redispatch costs |
ctrlUsageP | · | Active Power |
ctrlUsageQ | · | Reactive Power |
isConsCostOp_Q | · | Reactive power operating costs |
iInterPol_Q | · | Approximation |
polyDegree_Q | · | Polynomial degree |
discMethCostOp_Q | · | Piecewise linearisation for LP |
Pctrl | · | Active power steps |
i_prty | · | Priority |
uset_mode | · | Setpoint |
iHmcType | · | Type of Harmonic Voltages |
chaInputOpt | · | Defined for |
outServPzero | · | Out of service when active power is zero |
iAstabint | · | A-stable integration algorithm |
isCtrlPplacement | · | Optimise active power |
pgini | MW | Active Power |
qgini | Mvar | Reactive Power |
snss | MVA | Short-Circuit Power Sk''max |
rntxn | · | R/X Ratio (max.) |
xntrn | · | X/R Ratio (max.) |
cmax | · | c-Factor (max.) |
cmin | · | c-Factor (min.) |
z2tz1 | · | Z2/Z1 max. |
x0tx1 | · | X0/X1 max. |
r0tx0 | · | R0/X0 max. |
C0 | uF | C0 max. |
Re | Ohm | Resistance, Re |
Xe | Ohm | Reactance, Xe |
usetp | p.u. | Voltage Setpoint |
snssmin | MVA | Short-Circuit Power Sk''min |
rntxnmin | · | R/X Ratio (min.) |
xntrnmin | · | X/R Ratio (min.) |
curpreld | kA | Current |
cospreld | · | Power Factor |
curpreldmin | kA | Current |
cospreldmin | · | Power Factor |
z2tz1min | · | Z2/Z1 min. |
x0tx1min | · | X0/X1 min. |
r0tx0min | · | R0/X0 min. |
C0min | uF | C0 min. |
MaxS | MW | Max. |
ecost | USD/kWh | Energy Cost |
cmonth | USD/M | No load costs (monthly) |
round | % | Smoothing factor |
smoothfac_Q | % | Smoothing Factor |
Pmin_uc | MW | Min. |
Kpf | MW/Hz | Primary Frequency Bias |
P1hrm | MW | Active power |
Q1hrm | Mvar | Reactive power |
u1hrm | p.u. | Positive sequence voltage |
SkV | MVA | Short-Circuit Power, Sk |
psikV | deg | Impedance Angle, psik |
z2tz1kV | · | Z2/Z1 |
x0tx1kV | · | X0/X1 |
r0tx0kV | · | R0/X0 |
C0kV | uF | C0 |
cosn | · | Power Factor |
tds | s | Td' |
tqs | s | Tq' |
tdss | s | Td'' |
tqss | s | Tq'' |
xd | p.u. | xd |
xds | p.u. | xd' |
xq | p.u. | xq |
xqs | p.u. | xq' |
GPSlat | deg | Latitude / Northing |
GPSlon | deg | Longitude / Easting |
phiini | deg | Angle |
tag | s | Acceleration Time Constant |
K | MW/Hz | Secondary Frequency Bias |
QtargetRPR | % | Q target value |
genShiftKey | % | Generation shift key |
PminInv | MW | Min. |
PmaxInv | MW | Max. |
costCurtailment | USD/MWh | Costs for curtailment |
penaltyCosts | USD/MWh | Penalty costs |
fixedCosts | USD/h | Fixed costs |
consumCosts | USD/MWh | Consumption costs |
costRedispatchUp | USD/MWh | Upward active power redispatch costs |
costRedispatchDown | USD/MWh | Downward active power redispatch costs |
costRedispatchQ | USD/Mvarh | Costs for reactive power deviation |
cost_up | USD | Warm-start costs |
costColdStart | USD | Cold-start costs |
coldStartTime | h | Cold-start time |
costShutDown | USD | Shut-down costs |
limRampUp | MW/h | Ramp-up limit |
limRampDown | MW/h | Ramp-down limit |
limRampStartUp | MW | Start-up ramp limit |
limRampShutDown | MW | Shut-down ramp limit |
minUpTime | h | Minimum up-time |
minDownTime | h | Minimum down-time |
targetQ | Mvar | Q target value |
targetV | p.u. | Target voltage setpoint |
fixedCostsSetpChangeQ | USD | Fixed costs per setpoint deviation |
zeroFixedCostsSetpChangeQ | USD | Fixed costs per setpoint deviation |
costRedispatchV | USD/p.u. | Costs for voltage setpoint deviation |
curativeLimP | MW | Max. curative active power deviation |
curativeLimQ | Mvar | Max. curative reactive power deviation |
curativeCosts | USD/MVAh | Costs for curative power deviation |
penaltyCosts_Q | USD/Mvarh | Penalty costs |
dpl1 | · | dpl1 |
dpl2 | · | dpl2 |
dpl3 | · | dpl3 |
dpl4 | · | dpl4 |
dpl5 | · | dpl5 |
scaleQmin | % | Scaling Factor (min.) |
scaleQmax | % | Scaling Factor (max.) |
cQ_min | Mvar | Min. |
cQ_max | Mvar | Max. |
appr_modif | · | Modified |
cpower | MW | From |
ccost | USD/MWh | Costs |
vecBreakpointsP | MW | Power |
vecStartUpTimes | >=h | Down-time |
vecStartUpCosts | USD | Start-up costs |
vecDiscreteCtrlPvals | % | Valid active power values |
cpower_Q | Mvar | Power |
ccost_Q | USD/h | Costs |
vecBreakpointsQ | Mvar | Power |
ifreqs | · | Harm. Order |
u1_mag | p.u. | u1, Mag. |
u1_phase | deg | u1, Ang. |
u2_mag | p.u. | u2, Mag. |
u2_phase | deg | u2, Ang. |
u0_mag | p.u. | u0, Mag. |
u0_phase | deg | u0, Ang. |
umag_iec1 | p.u. | U_h |
ifreqs_iec2 | · | Harm. Order |
umag_iec2 | p.u. | U_h |
desc | · | Description |
cimRdfId | · | RDF ID |
sOpComment | · | Operator Comment |
fold_id | · | In Folder |
bus1 | · | TerminalObject: StaCubic |
bus1n | · | NeutralObject: StaCubic |
doc_id | · | Additional Data |
pOwner | · | OwnerObject: ElmOwner |
pOperator | · | OperatorObject: ElmOperator |
p_uctrl | · | Reference BusbarObject: ElmTerm*,StaBar*,ElmLdfctrl* |
pBMU | · | Virtual Power PlantObject: ElmBmu |
efficiencyCurveGen | · | Efficiency curve (generation)Object: IntEffcurve |
efficiencyCurveConsum | · | Efficiency curve (consumption)Object: IntEffcurve |
pOpCostCurve | · | Generator cost curveObject: IntCostcurvegen |
phmc | · | Harmonic VoltagesObject: TypHmcvolt,TypHmcopvolt |
fcharR1 | ChaPol,ChaVec,ChaMat,ChaOpfreq | R1(f) |
fcharL1 | ChaPol,ChaVec,ChaMat,ChaOpfreq | L1(f) |
fcharR0 | ChaPol,ChaVec,ChaMat,ChaOpfreq | R0(f) |
fcharL0 | ChaPol,ChaVec,ChaMat,ChaOpfreq | L0(f) |
fcharR2 | ChaPol,ChaVec,ChaMat,ChaOpfreq | R2(f) |
fcharL2 | ChaPol,ChaVec,ChaMat,ChaOpfreq | L2(f) |
fcharX1 | ChaPol,ChaVec,ChaMat,ChaOpfreq | X1(f) |
fcharX2 | ChaPol,ChaVec,ChaMat,ChaOpfreq | X2(f) |
fcharX0 | ChaPol,ChaVec,ChaMat,ChaOpfreq | X0(f) |
fcharC0 | ChaPol,ChaVec,ChaMat,ChaOpfreq | C0(f) |
pQlimType | · | Capability CurveObject: IntQlim |
cpHeadFold | · | Head Folder |
bus1_bar | · | Terminal |
bus1n_bar | · | Neutral |
cpGrid | · | GridObject: ElmNet |
cpZone | · | ZoneObject: ElmZone |
cpArea | · | AreaObject: ElmArea |
cpFeed | · | FeederObject: ElmFeeder |
ciDist | · | Distance from infeed in number of buses |
ciLater | · | Lateral Index |
ciDistRoot | · | Distance from first infeed in number of buses |
ciDistAll | · | Distance from infeed in number of buses including switches |
ciDistAllRoot | · | Distance from first infeed in number of buses including switches |
cpOwner | · | OwnerObject: ElmOwner |
cpOperator | · | OperatorObject: ElmOperator |
cpBranch | · | BranchObject: ElmBranch |
cpSite | · | SiteObject: ElmSite |
cpSubstat | · | SubstationObject: ElmSubstat,ElmTrfstat |
cpMeteostat | · | Meteo StationObject: ElmMeteostat |
ciOutaged | · | Planned Outage |
ciEnergized | · | Energized |
ciEarthed | · | Earthed |
cDisplayName | · | Display Name |
cpSupplyTransformer | · | Supplying TransformerObject: ElmTr?,ElmTrmult |
cpSupplyTrfStation | · | Supplying Secondary SubstationObject: ElmTrfstat |
cpSupplySubstation | · | Supplying SubstationObject: ElmSubstat |
sgini | MVA | Apparent Power |
cosgini | · | Power Factor |
pf_recap | · | Power Factor |
p_direc | · | Power Direction |
ikss | kA | Short-Circuit Current Ik''max |
cgnd | · | Star Point |
cpeter | · | Petersen Coil |
c_psecc | · | External Secondary ControllerObject: ElmSecctrl |
ikssmin | kA | Short-Circuit Current Ik''min |
c_pstac | · | External Station ControllerObject: ElmStactrl |
costRedispatchP | USD/MWh | Costs for active power deviation |
cStorage | · | Storage modelObject: ElmStorage |
cIsMustRunUC | · | Must run |
efficiencyLPgen | · | Used efficiency (generation) |
efficiencyLPconsum | · | Used efficiency (consumption) |
allowGenMode | · | Separate generation mode |
PminInvPU | p.u. | Min. |
PmaxInvPU | p.u. | Max. |
avgCostsUc | USD/MWh | Average costs |
cfixedCosts | USD/h | Fixed costs |
limRampUpPU | p.u./h | Ramp-up limit |
limRampDownPU | p.u./h | Ramp-down limit |
limRampStartUpPU | p.u. | Start-up ramp limit |
limRampShutDownPU | p.u. | Shut-down ramp limit |
cIsDiscreteCtrlP | · | Restriction to discrete active power values |
cVecDiscreteCtrlPvals | % | Valid active power values |
cIsPcurrAllowed | · | Allow current active power value |
cCtrlUsageP | · | Active Power |
cCtrlUsageQ | · | Reactive Power |
cCurativeLimP_PU | p.u. | Max. curative active power deviation |
cCurativeLimQ_PU | p.u. | Max. curative reactive power deviation |
avgCostsUc_Q | USD/Mvarh | Average costs |
avgCostsUc_posQ | USD/Mvarh | Average costs (pos. range) |
avgCostsUc_negQ | USD/Mvarh | Average costs (neg. range) |
Pnom | MW | Pn |
Pmax_ucPU | p.u. | Max. |
Pmin_ucPU | p.u. | Min. |
cpCtrlNode | · | Target NodeObject: ElmTerm |
avgCosts | USD/MWh | Average Costs |
cfreqs | Hz | Frequency |
cTypHmc | · | Type of harmonic sources |
R1 | Ohm | Resistance, R1 |
L1 | mH | Inductance, L1 |
X1 | Ohm | Reactance, X1 |
R2 | Ohm | Resistance, R2 |
L2 | mH | Inductance, L2 |
X2 | Ohm | Reactance, X2 |
R0 | Ohm | Resistance, R0 |
L0 | mH | Inductance, L0 |
X0 | Ohm | Reactance, X0 |
C0a | uF | Capacitance, C0 |
qdslCtrl | · | Quasi-Dynamic ModelObject: ElmQdsl |
snom | MVA | Nominal Apparent Power |
ElmXnet load flow results
Read after ComLdf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1 | p.u. | Current, Magnitude, referred to network |
m:I:bus1 | kA | Current, Magnitude |
m:phii:bus1 | deg | Current, Angle |
m:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:S:bus1 | MVA | Apparent Power |
m:cosphi:bus1 | · | Power Factor |
m:tanphi:bus1 | · | tan(phi) |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:Ssum:bus1 | MVA | Total Apparent Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:tanphisum:bus1 | · | Total tan(phi) |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:ur:bus1 | p.u. | Voltage, Real Part |
m:ui:bus1 | p.u. | Voltage, Imaginary Part |
m:u:bus1 | p.u. | Voltage, Magnitude |
m:ir:bus1 | p.u. | Current, Real Part |
m:ii:bus1 | p.u. | Current, Imaginary Part |
m:i:bus1 | p.u. | Current, Magnitude |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Brkload:bus1 | % | Breaker Loading |
m:Spu:bus1 | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:bus1 | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:bus1 | deg | Zero-Sequence-Voltage, Angle |
m:u2:bus1 | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:bus1 | deg | Negative-Sequence-Voltage, Angle |
m:irnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part, referred to network |
m:iinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part, referred to network |
m:inet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude, referred to network |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:bus1 | p.u. | Zero-Sequence Current, Real Part |
m:i0i:bus1 | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:bus1 | p.u. | Zero-Sequence Current, Magnitude |
m:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1 | kA | 3*I0 |
m:phii0:bus1 | deg | Zero-Sequence Current, Angle |
m:i2r:bus1 | p.u. | Negative-Sequence Current, Real Part |
m:i2i:bus1 | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:bus1 | p.u. | Negative-Sequence Current, Magnitude |
m:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1 | deg | Negative-Sequence Current, Angle |
m:ubfacI:bus1 | % | Current Unbalance Factor |
m:ubfacS:bus1 | % | Power Unbalance Factor |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:bus1 | MW | Positive Sequence Active Power |
m:Q1:bus1 | Mvar | Positive Sequence Reactive Power |
m:P2:bus1 | MW | Negative Sequence Active Power |
m:Q2:bus1 | Mvar | Negative Sequence Reactive Power |
m:P0:bus1 | MW | Zero Sequence Active Power |
m:Q0:bus1 | Mvar | Zero Sequence Reactive Power |
m:i2P:bus1 | p.u. | Negative-Sequence Active Current |
m:i2Q:bus1 | p.u. | Negative-Sequence Reactive Current |
m:I2P:bus1 | kA | Negative-Sequence Active Current |
m:I2Q:bus1 | kA | Negative-Sequence Reactive Current |
m:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1 | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:bus1 | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:bus1:Aper phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:p | MW | Total Active Power |
c:q | Mvar | Total Reactive Power |
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:cosn | · | Nominal-Power factor |
c:c2 | · | Voltage Coefficient (uknom/ugn) |
c:uini | p.u. | Voltage Setpoint for PV and Slack |
c:iPowerOn | · | Flag |
c:xdq | p.u. | Synchronous Reactance |
c:rs | p.u. | Resistance |
c:i_qlim | · | Reactive power limit reached |
c:Qmin | Mvar | Lower limit of reactive power |
c:Qmax | Mvar | Upper limit of reactive power |
c:sm | MVA | Complex Power |
c:phiini | · | Initial Angle |
c:Pdisp | MW | Power (Eco-Dispatch) |
c:Kf | MW/Hz | Frequency Bias |
c:Kp | p.u. | Active Power Participation |
c:iRefElement | · | Reference Element |
c:nCtrlIter | · | No. of CTRL-iterations |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
c:z2 | p.u. | Negative Sequence Impedance |
c:z0 | p.u. | Zero Sequence Impedance |
c:ze | p.u. | Grounding Impedance |
c:MaxS | MVA | Max. Apparent Power |
c:cst_disp | USD/h | Operating Costs |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:bus1 | MW | Generation, Active Power |
n:Qgen:bus1 | Mvar | Generation, Reactive Power |
n:Pmot:bus1 | MW | Motor Load, Active Power |
n:Qmot:bus1 | Mvar | Motor Load, Reactive Power |
n:Pload:bus1 | MW | General Load, Active Power |
n:Qload:bus1 | Mvar | General Load, Reactive Power |
n:Pcomp:bus1 | MW | Compensation (Losses) |
n:Qcomp:bus1 | Mvar | Compensation |
n:Pnet:bus1 | MW | External Networks, Active Power |
n:Qnet:bus1 | Mvar | External Networks, Reactive Power |
n:Pflow:bus1 | MW | Power Flow, Active Power |
n:Qflow:bus1 | Mvar | Power Flow, Reactive Power |
n:Pout:bus1 | MW | Outgoing Flow, Active Power |
n:Qout:bus1 | Mvar | Outgoing Power, Reactive Power |
n:Sout:bus1 | MVA | Outgoing Power, Apparent Power |
n:cosphiout:bus1 | · | Outgoing Power, Power Factor |
n:Pbalance:bus1 | MW | Active Power Balance (=0) |
n:Qbalance:bus1 | Mvar | Reactive Power Balance (=0) |
n:LossPdown:bus1 | MW | Losses, downstream |
n:LossQdown:bus1 | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:bus1 | MW | Load losses, downstream |
n:LossQdownload:bus1 | Mvar | Load losses, downstream |
n:LossPdownnoload:bus1 | MW | No load losses, downstream |
n:LossQdownnoload:bus1 | Mvar | No load losses, downstream |
n:du_feed:bus1 | % | Difference from voltage at start of feeder |
n:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aper phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1 | kV | 3*U0 |
n:phiu0:bus1 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:bus1 | p.u. | Average-Voltage, Magnitude |
n:Um:bus1 | kV | Average-Voltage, Magnitude |
n:uphtmin:bus1 | p.u. | Minimum of Phase Technology dependent Voltage, Magnitude |
n:uphtmax:bus1 | p.u. | Maximum of Phase Technology dependent Voltage, Magnitude |
n:ubfac:bus1 | % | Unbalance Factor |
s:pset | MW | Active Power Setpoint |
s:qset | Mvar | Reactive Power Setpoint |
s:dFin | Hz | Frequency Deviation |
s:dF | Hz | Frequency Deviation Output |
ElmXnet short-circuit results
Read after ComShc with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:I:bus1 | kA | Short-Circuit Current, Magnitude |
m:phii:bus1 | deg | Phase Current, Angle |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in Positive-Sequence System |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Ikss:bus1 | kA | Initial Short-Circuit Current |
m:ikss:bus1 | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:bus1 | MVA | Initial Short-Circuit Power |
m:ip:bus1 | kA | Peak Short-Circuit Current |
m:maxIkss:bus1 | kA | Max. Initial Short-Circuit Current |
m:maxip:bus1 | kA | Max. Peak Short-Circuit Current |
m:maxIth:bus1 | kA | Max. Thermal equivalent Short-Circuit Current |
m:maxIb:bus1 | kA | Max. Breaking Current |
m:R:bus1 | Ohm | Fault Impedance, Real Part |
m:X:bus1 | Ohm | Fault Impedance, Imaginary Part |
m:Z:bus1 | Ohm | Fault Impedance, Magnitude |
m:phiz:bus1 | deg | Fault Impedance, Angle |
m:Rs:bus1 | Ohm | Source Impedance, Real Part |
m:Xs:bus1 | Ohm | Source Impedance, Imaginary Part |
m:Zs:bus1 | Ohm | Source Impedance, Magnitude |
m:phizs:bus1 | deg | Source Impedance, Angle |
m:BrkIpload:bus1 | % | Breaker Loading (peak) |
m:Ib:bus1 | kA | Short-Circuit Breaking Current |
m:Sb:bus1 | MVA | Short-Circuit Breaking Power |
m:Ith:bus1 | kA | Thermal equivalent Short-Circuit Current |
m:zSbase:bus1 | p.u. | Fault Impedance, Magnitude |
m:XtoR:bus1 | · | X/R ratio |
m:cosphiui:bus1 | · | cosphi |
m:BrkIbload:bus1 | % | Breaker Loading (breaking) |
m:BrkmaxIb:bus1 | kA | Max. Breaking Current (breaker time) |
m:Ik:bus1 | kA | Steady-State Short-Circuit Current |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, Magnitude |
m:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1 | kA | 3*I0 |
m:phii0:bus1 | deg | Zero-Sequence Current, Angle |
m:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1 | deg | Negative-Sequence Current, Angle |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:P2:bus1 | MW | P2 |
m:Q2:bus1 | Mvar | Q2 |
m:P0:bus1 | MW | P0 |
m:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1 | deg | Angle between Voltage and Current in Zero-Sequence System |
m:phiu2i2:bus1 | deg | Angle between Voltage and Current in Negative-Sequence System |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:Ikss:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
m:ikss:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Initial Short-Circuit Current, Magnitude |
m:Skss:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
m:Skssx3:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
m:ip:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
m:Z:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Fault Impedance, Magnitude |
m:phiz:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Fault Impedance, Angle |
m:Zl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Line-Line Fault Impedance, Magnitude |
m:phizl:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Fault Impedance, Angle |
m:Z0:bus1 | Ohm | Zero-Sequence Fault Impedance, Magnitude |
m:phiz0:bus1 | deg | Zero-Sequence Fault Impedance, Angle |
m:z0Sbase:bus1 | p.u. | Zero-Sequence Fault Impedance, Magnitude |
m:cosphiu1i1:bus1 | · | Positive-Sequence cosphi |
m:I0x3watt:bus1 | kA | Earth-Fault Residual Current |
m:I0x3var:bus1 | kA | Capacitive Earth-Fault Current |
m:Q0cap:bus1 | Mvar | Q0 capacitive |
m:Rfrel:bus1 | Ohm | Relay Impedance, Real Part |
m:Xfrel:bus1 | Ohm | Relay Impedance, Imaginary Part |
m:Zfrel:bus1 | Ohm | Relay Impedance, Magnitude |
m:phizfrel:bus1 | deg | Relay Impedance, Angle |
m:Zf:bus1 | Ohm | Meas. Fault Impedance, Magnitude |
m:phizf:bus1 | deg | Meas. Fault Impedance, Angle |
c:z1 | p.u. | Positive-sequence impedance |
c:uini1 | p.u. | Internal positive-sequence voltage |
c:z2 | p.u. | Negative-sequence impedance |
c:z0 | p.u. | Zero-sequence impedance |
c:ze | p.u. | Grounding impedance |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Ikss:bus1 | kA | Initial Short-Circuit Current |
n:I:bus1 | kA | Short-Circuit Current |
n:phii:bus1 | deg | Phase Current, Angle |
n:Skss:bus1 | MVA | Initial Short-Circuit Power |
n:ip:bus1 | kA | Peak Short-Circuit Current |
n:Ib:bus1 | kA | Short-Circuit Breaking Current |
n:Sb:bus1 | MVA | Short-Circuit Breaking Power |
n:idc:bus1 | kA | Decaying Component |
n:Ith:bus1 | kA | Thermal equivalent Short-Circuit Current |
n:R1toX1:bus1 | · | R1/X1 ratio (Zk") |
n:X1toR1:bus1 | · | X1/R1 ratio (Zk") |
n:R:bus1 | Ohm | Short-Circuit Impedance, Real Part |
n:X:bus1 | Ohm | Short-Circuit Impedance, Imaginary Part |
n:Z:bus1 | Ohm | Short-Circuit Impedance, Magnitude |
n:phiz:bus1 | deg | Short-Circuit Impedance, Angle |
n:urpref:bus1 | p.u. | Pre-fault Voltage, Real Part |
n:uipref:bus1 | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:bus1 | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:bus1 | % | Pre-fault Voltage, Magnitude |
n:Upref:bus1 | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:bus1 | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:bus1 | deg | Pre-fault Voltage, Angle |
n:phiui:bus1 | deg | Angle between Voltage and Current |
n:Ithload:bus1 | % | Loading, Thermal equivalent Current |
n:Ipload:bus1 | % | Loading, Peak Short-Circuit Current |
n:Ithrtk:bus1 | kA | Rated Short-Time Current (Tk) |
n:XtoR:bus1 | · | X/R ratio (peak) |
n:RtoX:bus1 | · | R/X ratio (peak) |
n:XtoR_b:bus1 | · | X/R ratio (dc) |
n:RtoX_b:bus1 | · | R/X ratio (dc) |
n:fctof_b:bus1 | · | Equivalent Frequency fc/f (dc) |
n:rSbase:bus1 | p.u. | Short-Circuit Impedance, Real Part |
n:xSbase:bus1 | p.u. | Short-Circuit Impedance, Imaginary Part |
n:zSbase:bus1 | p.u. | Short-Circuit Impedance, Magnitude |
n:Tn:bus1 | ms | Grid Time Constant |
n:Ik:bus1 | kA | Steady-State Short-Circuit Current |
n:cfac:bus1 | · | Voltage Factor |
n:Iasy:bus1 | kA | Asymmetrical Breaking Current |
n:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aper phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1 | kV | 3*U0 |
n:phiu0:bus1 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:Ikss:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Initial Short-Circuit Current |
n:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
n:Skss:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Initial Short-Circuit Power |
n:Skssx3:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | 3*Initial Short-Circuit Power |
n:ip:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Peak Short-Circuit Current |
n:Ib:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Breaking Current |
n:Sb:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Short-Circuit Breaking Power |
n:Ith:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Thermal equivalent Short-Circuit Current |
n:Ithmax:bus1 | kA | Max. Thermal equivalent Short-Circuit Current |
n:R0:bus1 | Ohm | Zero-Sequence Impedance, Real Part |
n:X0:bus1 | Ohm | Zero-Sequence Impedance, Imaginary Part |
n:Z0:bus1 | Ohm | Zero-Sequence Impedance, Magnitude |
n:phiz0:bus1 | deg | Zero-Sequence Impedance, Angle |
n:r0Sbase:bus1 | p.u. | Zero-Sequence Impedance, Real Part |
n:x0Sbase:bus1 | p.u. | Zero-Sequence Impedance, Imaginary Part |
n:z0Sbase:bus1 | p.u. | Zero-Sequence Impedance, Magnitude |
n:R1:bus1 | Ohm | Positive-Sequence Impedance, Real Part |
n:X1:bus1 | Ohm | Positive-Sequence Impedance, Imaginary Part |
n:Z1:bus1 | Ohm | Positive-Sequence Impedance, Magnitude |
n:phiz1:bus1 | deg | Positive-Sequence Impedance, Angle |
n:r1Sbase:bus1 | p.u. | Positive-Sequence Impedance, Real Part |
n:x1Sbase:bus1 | p.u. | Positive-Sequence Impedance, Imaginary Part |
n:z1Sbase:bus1 | p.u. | Positive-Sequence Impedance, Magnitude |
n:R2:bus1 | Ohm | Negative-Sequence Impedance, Real Part |
n:X2:bus1 | Ohm | Negative-Sequence Impedance, Imaginary Part |
n:Z2:bus1 | Ohm | Negative-Sequence Impedance, Magnitude |
n:phiz2:bus1 | deg | Negative-Sequence Impedance, Angle |
n:r2Sbase:bus1 | p.u. | Negative-Sequence Impedance, Real Part |
n:x2Sbase:bus1 | p.u. | Negative-Sequence Impedance, Imaginary Part |
n:z2Sbase:bus1 | p.u. | Negative-Sequence Impedance, Magnitude |
n:R0toX0:bus1 | · | R0/X0 ratio (Zk") |
n:X0toR0:bus1 | · | X0/R0 ratio (Zk") |
n:R2toX2:bus1 | · | R2/X2 ratio (Zk") |
n:X2toR2:bus1 | · | X2/R2 ratio (Zk") |
n:R:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Ground |
n:X:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Ground |
n:Z:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Ground |
n:phiz:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Ground |
n:Rl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Line |
n:Xl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Line |
n:Zl:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Line |
n:phizl:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Line |
n:Rln:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Resistance, Line-Neutral |
n:Xln:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Reactance, Line-Neutral |
n:Zln:bus1:Aper phase :A, :B, :C, unbalanced only | Ohm | Network Impedance, Line-Neutral |
n:phizln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle of Network Impedance, Line-Neutral |
n:Rn:bus1 | Ohm | Network Resistance, Neutral |
n:Xn:bus1 | Ohm | Network Reactance, Neutral |
n:Zn:bus1 | Ohm | Network Impedance, Neutral |
n:phizn:bus1 | deg | Angle of Network Impedance, Neutral |
n:eff:bus1:Aper phase :A, :B, :C, unbalanced only | · | Earth Fault Factor |
n:X0toX1:bus1 | · | X0/X1 |
n:In:bus1 | kA | Neutral Current, Magnitude |
n:phiin:bus1 | deg | Neutral Current, Angle |
n:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
n:I0x3:bus1 | kA | 3*I0 |
n:phii0:bus1 | deg | Zero-Sequence Current, Angle |
n:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
n:phii1:bus1 | deg | Positive-Sequence Current, Angle |
n:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
n:phii2:bus1 | deg | Negative-Sequence Current, Angle |
n:urpref:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Real Part |
n:uipref:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Imaginary Part |
n:upref:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Pre-fault Voltage, Magnitude |
n:uprefpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Pre-fault Voltage, Magnitude |
n:Upref:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Pre-fault Voltage, Magnitude |
n:Ulpref:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Pre-fault Voltage, Magnitude |
n:phiupref:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Pre-fault Voltage, Angle |
n:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
n:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
n:phiu2i2:bus1 | deg | Angle between Voltage and Current in negative sequence system |
n:phiu0i0:bus1 | deg | Angle between Voltage and Current in zero-sequence system |
n:Ik:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Steady-State Short-Circuit Current |
n:in:bus1 | p.u. | Neutral Current, Magnitude |
n:i0r:bus1 | p.u. | Zero-Sequence Current, Real Part |
n:i0i:bus1 | p.u. | Zero-Sequence Current, Imaginary Part |
n:i0:bus1 | p.u. | Zero-Sequence Current, Magnitude |
n:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
n:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
n:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
n:i2r:bus1 | p.u. | Negative-Sequence Current, Real Part |
n:i2i:bus1 | p.u. | Negative-Sequence Current, Imaginary Part |
n:i2:bus1 | p.u. | Negative-Sequence Current, Magnitude |
ElmXnet rms simulation results
Read after ComInc (RMS) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1 | p.u. | Current, Magnitude, referred to network |
m:I:bus1 | kA | Current, Magnitude |
m:phii:bus1 | deg | Current, Angle |
m:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:S:bus1 | MVA | Apparent Power |
m:cosphi:bus1 | · | Power Factor |
m:tanphi:bus1 | · | tan(phi) |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:Ssum:bus1 | MVA | Total Apparent Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:tanphisum:bus1 | · | Total tan(phi) |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:ur:bus1 | p.u. | Voltage, Real Part |
m:ui:bus1 | p.u. | Voltage, Imaginary Part |
m:u:bus1 | p.u. | Voltage, Magnitude |
m:ir:bus1 | p.u. | Current, Real Part |
m:ii:bus1 | p.u. | Current, Imaginary Part |
m:i:bus1 | p.u. | Current, Magnitude |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Brkload:bus1 | % | Breaker Loading |
m:Spu:bus1 | MVA/p.u. | Apparent Power per p.u. Voltage |
m:urnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part, referred to network |
m:uinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part, referred to network |
m:u0:bus1 | p.u. | Zero-Sequence-Voltage, Magnitude |
m:phiu0:bus1 | deg | Zero-Sequence-Voltage, Angle |
m:u2:bus1 | p.u. | Negative-Sequence-Voltage, Magnitude |
m:phiu2:bus1 | deg | Negative-Sequence-Voltage, Angle |
m:irnet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:iinet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:inet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Phase Current, Magnitude |
m:phii:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Phase Current, Angle |
m:i0r:bus1 | p.u. | Zero-Sequence Current, Real Part |
m:i0i:bus1 | p.u. | Zero-Sequence Current, Imaginary Part |
m:i0:bus1 | p.u. | Zero-Sequence Current, Magnitude |
m:I0:bus1 | kA | Zero-Sequence Current, Magnitude |
m:I0x3:bus1 | kA | 3*I0 |
m:phii0:bus1 | deg | Zero-Sequence Current, Angle |
m:i2r:bus1 | p.u. | Negative-Sequence Current, Real Part |
m:i2i:bus1 | p.u. | Negative-Sequence Current, Imaginary Part |
m:i2:bus1 | p.u. | Negative-Sequence Current, Magnitude |
m:I2:bus1 | kA | Negative-Sequence Current, Magnitude |
m:phii2:bus1 | deg | Negative-Sequence Current, Angle |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Q:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power |
m:S:bus1:Aper phase :A, :B, :C, unbalanced only | MVA | Apparent Power |
m:cosphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | Power Factor |
m:tanphi:bus1:Aper phase :A, :B, :C, unbalanced only | · | tan(phi) |
m:Pln:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power (Line-Neutral) |
m:Qln:bus1:Aper phase :A, :B, :C, unbalanced only | Mvar | Reactive Power (Line-Neutral) |
m:P1:bus1 | MW | Positive Sequence Active Power |
m:Q1:bus1 | Mvar | Positive Sequence Reactive Power |
m:P2:bus1 | MW | Negative Sequence Active Power |
m:Q2:bus1 | Mvar | Negative Sequence Reactive Power |
m:P0:bus1 | MW | Zero Sequence Active Power |
m:Q0:bus1 | Mvar | Zero Sequence Reactive Power |
m:i2P:bus1 | p.u. | Negative-Sequence Active Current |
m:i2Q:bus1 | p.u. | Negative-Sequence Reactive Current |
m:I2P:bus1 | kA | Negative-Sequence Active Current |
m:I2Q:bus1 | kA | Negative-Sequence Reactive Current |
m:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Real Part |
m:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Imaginary Part |
m:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, Magnitude |
m:ir:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Real Part |
m:ii:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Imaginary Part |
m:i:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, Magnitude |
m:phiui:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Angle between Voltage and Current |
m:phiu0i0:bus1 | deg | Angle between Voltage and Current in zero-sequence system |
m:phiu2i2:bus1 | deg | Angle between Voltage and Current in negative sequence system |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:BrkloadPh:bus1:Aper phase :A, :B, :C, unbalanced only | % | Breaker Loading |
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:c2 | · | Voltage Coefficient (uknom/ugn) |
c:Te | s | Excitation-Time constant |
c:TD | s | Time constant of D-winding |
c:Tx | s | Time Constant of x-winding |
c:TQ | s | Time Constant of Q-winding |
c:Tag | s | Acceleration Time |
c:xme | p.u. | Electrical Torque |
c:Yd | p.u. | Inverted reactance matrix |
c:Yq | p.u. | Inverted reactance matrix |
c:frnom | Hz | Nominal frequency |
c:hpi | rad/s | Nominal angular frequency |
c:loading | % | Loading |
c:id | · | Direct Axis Current |
c:iq | · | Quadrature Axis Current |
c:ie | · | Excitation Current |
c:xmt | p.u. | Mechanical Torque |
c:addmt | · | Additional Torque |
c:psid | · | Flux in d-axis |
c:psiq | · | Flux in q-axis |
c:pgt | p.u. | Active power |
c:fe | p.u. | El. frequency |
c:xdss | p.u. | Subtransient reactance (d-axis) |
c:xqss | p.u. | Subtransient reactance (q-axis) |
c:Ptspin | MW | Total Turbine Power of Area |
c:Pnomspin | MW | Total Nominal Power of Spinning Machines in Area |
c:Presspin | MW | Spinning Reserve of Area |
c:Tagav | s | System Inertia of Area |
c:p_mag | · | Participation, Magnitude |
c:p_phi | deg | Participation, Angle |
c:p_mags | · | Participation, Magnitude (signed) |
c:lEVec_mag | · | Controllability, Magnitude |
c:lEVec_phi | deg | Controllability, Angle |
c:lEVec_mags | · | Controllability, Magnitude (signed) |
c:rEVec_mag | · | Observability, Magnitude |
c:rEVec_phi | deg | Observability, Angle |
c:rEVec_mags | · | Observability, Magnitude (signed) |
c:droop | · | System regulation |
c:dp | p.u. | Power adjustment due to speed deviation |
c:psidss | p.u. | Subtransient Flux (d-axis) |
c:psiqss | p.u. | Subtransient Flux (q-axis) |
c:r0 | · | Zero Sequence Resistance |
c:x0 | · | Zero Sequence Reactance |
c:r2 | · | Negative Sequence Resistance |
c:x2 | · | Negative Sequence Reactance |
c:rearth | · | Grounding Resistance |
c:xearth | · | Grounding Reactance |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:ishc:bus1 | p.u. | Short-Circuit Current, magnitude |
n:Ishc:bus1 | kA | Short-Circuit Current, magnitude |
n:fe:bus1 | p.u. | Electrical Frequency |
n:dfehz:bus1 | Hz | Deviation of the El. Frequency |
n:fehz:bus1 | Hz | Electrical Frequency |
n:frnom:bus1 | Hz | Nominal Frequency |
n:ishcr:bus1 | p.u. | Short-Circuit Current, real |
n:ishci:bus1 | p.u. | Short-Circuit Current, imag |
n:dfedt:bus1 | p.u./s | Derivative of El. Frequency |
n:ur:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Real Part |
n:ui:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Imaginary Part |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Ground Voltage, Magnitude |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Ground Voltage, Magnitude |
n:du:bus1:Aper phase :A, :B, :C, unbalanced only | % | Voltage Deviation |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Ground Voltage, Angle |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage, Magnitude |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage, Magnitude |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage, Magnitude |
n:phiul:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Line Voltage, Angle |
n:u0:bus1 | p.u. | Zero-Sequence Voltage, Magnitude |
n:U0:bus1 | kV | Zero-Sequence Voltage, Magnitude |
n:U0x3:bus1 | kV | 3*U0 |
n:phiu0:bus1 | deg | Zero-Sequence Voltage, Angle |
n:U1:bus1 | kV | Line-Ground Positive-Sequence Voltage, Magnitude |
n:phiu1:bus1 | deg | Positive-Sequence Voltage, Angle |
n:u2:bus1 | p.u. | Negative-Sequence Voltage, Magnitude |
n:U2:bus1 | kV | Line-Ground Negative-Sequence Voltage, Magnitude |
n:phiu2:bus1 | deg | Negative-Sequence Voltage, Angle |
n:U1l:bus1 | kV | Line-Line Positive-Sequence Voltage, Magnitude |
n:U2l:bus1 | kV | Line-Line Negative-Sequence Voltage, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage, Magnitude |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage, Magnitude |
n:phiuln:bus1:Aper phase :A, :B, :C, unbalanced only | deg | Line-Neutral Voltage, Angle |
n:un:bus1 | p.u. | Neutral-Ground Voltage, Magnitude |
n:Un:bus1 | kV | Neutral-Ground Voltage, Magnitude |
n:phiun:bus1 | deg | Neutral-Ground Voltage, Angle |
n:upht:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Technology dependent Voltage, Magnitude |
n:Upht:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Technology dependent Voltage, Magnitude |
n:um:bus1 | p.u. | Average-Voltage, Magnitude |
n:Um:bus1 | kV | Average-Voltage, Magnitude |
n:ishc:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, magnitude |
n:Ishc:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current, magnitude |
n:inshc:bus1 | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:bus1 | kA | Neutral Short-Circuit Current, magnitude |
n:ishcr:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, real |
n:ishci:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current, imag |
s:psisr | p.u. | Stator Flux, Real Part |
s:psisi | p.u. | Stator Flux, Imaginary Part |
s:psie | p.u. | Excitation-Flux |
s:psiD | p.u. | Flux in D-winding |
s:psix | p.u. | Flux in x-winding |
s:psiQ | p.u. | Flux in Q-winding |
s:speed | p.u. | Speed |
s:phi | p.u. | Rotor-angle |
s:ve | p.u. | Excitation voltage |
s:pt | p.u. | Turbine Power |
s:xmdm | p.u. | Mechanical Torque |
s:uout | p.u. | Voltage |
s:xspeed | p.u. | Speed |
s:fref | p.u. | Reference Frequency |
ElmXnet emt simulation results
Read after ComInc (EMT) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:u0:bus1 | p.u. | Zero-Sequence-Voltage |
m:u1r:bus1 | p.u. | Voltage Phasor, Real Part |
m:u1i:bus1 | p.u. | Voltage Phasor, Imaginary Part |
m:u1:bus1 | p.u. | Voltage Phasor, Magnitude |
m:U1:bus1 | kV | Line-Ground Voltage Phasor, Magnitude |
m:U1l:bus1 | kV | Line-Line Voltage Phasor, Magnitude |
m:phiu1:bus1 | deg | Voltage Phasor, Angle |
m:inet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current, referred to network |
m:I:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Phase Current |
m:i0:bus1 | p.u. | Zero-Sequence Current |
m:I0:bus1 | kA | Zero-Sequence Current |
m:I0x3:bus1 | kA | 3*I0 |
m:i1r:bus1 | p.u. | Current Phasor, Real Part |
m:i1i:bus1 | p.u. | Current Phasor, Imaginary Part |
m:i1:bus1 | p.u. | Current Phasor, Magnitude |
m:I1:bus1 | kA | Current Phasor, Magnitude |
m:phii1:bus1 | deg | Current Phasor, Angle |
m:P:bus1:Aper phase :A, :B, :C, unbalanced only | MW | Active Power |
m:Psum:bus1 | MW | Power-Phasor, Active Power |
m:Qsum:bus1 | Mvar | Power Phasor, Reactive Part |
m:Ssum:bus1 | MVA | Power Phasor, Apparent Power |
m:i1P:bus1 | p.u. | Current Phasor, Active Current |
m:i1Q:bus1 | p.u. | Current Phasor, Reactive Current |
m:I1P:bus1 | kA | Current Phasor, Active Current |
m:I1Q:bus1 | kA | Current Phasor, Reactive Current |
m:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
m:i:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current Phasor |
m:Tfct:bus1 | s | Fault Clearing Time |
m:TfctPh:bus1:Aper phase :A, :B, :C, unbalanced only | s | Fault Clearing Time |
m:unet:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage, referred to network |
m:cosphi1:bus1 | · | Power-Phasor, Power-Factor |
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:c2 | · | Voltage Coefficient (uknom/ugn) |
c:Te | s | Excitation-Time constant |
c:TD | s | Time constant of D-winding |
c:Tx | s | Time Constant of x-winding |
c:TQ | s | Time Constant of Q-winding |
c:Tag | s | Acceleration Time |
c:xme | p.u. | Electrical Torque |
c:Yd | p.u. | Inverted reactance matrix |
c:Yq | p.u. | Inverted reactance matrix |
c:frnom | Hz | Nominal frequency |
c:hpi | rad/s | Nominal angular frequency |
c:id | p.u. | Direct Axis current |
c:iq | p.u. | Quadrature Axis current |
c:ie | · | Excitation Current |
c:xmt | p.u. | Mechanical Torque |
c:r0 | p.u. | Zero Sequence Resistance |
c:x0 | p.u. | Zero Sequence Reactance |
c:rearth | p.u. | Grounding Resistance |
c:xearth | p.u. | Grounding Reactance |
c:addmt | · | Additional Torque |
c:psid | p.u. | Flux in d-axis |
c:psiq | p.u. | Flux in q-axis |
c:pgt | p.u. | Active power |
c:fe | p.u. | El. frequency |
c:xdss | p.u. | Subtransient reactance (d-axis) |
c:xqss | p.u. | Subtransient reactance (q-axis) |
c:Ptspin | MW | Total Turbine Power of Area |
c:Pnomspin | MW | Total Nominal Power of Spinning Machines in Area |
c:Presspin | MW | Spinning Reserve of Area |
c:Tagav | s | System Inertia of Area |
c:p_mag | · | Participation, Magnitude |
c:p_phi | deg | Participation, Angle |
c:p_mags | · | Participation, Magnitude (signed) |
c:lEVec_mag | · | Controllability, Magnitude |
c:lEVec_phi | deg | Controllability, Angle |
c:lEVec_mags | · | Controllability, Magnitude (signed) |
c:rEVec_mag | · | Observability, Magnitude |
c:rEVec_phi | deg | Observability, Angle |
c:rEVec_mags | · | Observability, Magnitude (signed) |
c:droop | · | System regulation |
c:dp | p.u. | Power adjustment due to speed deviation |
c:igen | · | Index |
c:uss | p.u. | Subtransient Voltage |
c:xss | p.u. | Subtransient Reactance |
n:u:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Phase Voltage |
n:upc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Phase Voltage |
n:U:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Phase Voltage |
n:ul:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Line Voltage |
n:ulpc:bus1:Aper phase :A, :B, :C, unbalanced only | % | Line-Line Voltage |
n:Ul:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Line Voltage |
n:u0:bus1 | p.u. | Zero-Sequence-Voltage |
n:U0:bus1 | kV | Zero-Sequence-Voltage |
n:U0x3:bus1 | kV | 3*U0 |
n:u1:bus1 | p.u. | Voltage Phasor, Magnitude |
n:u1pc:bus1 | % | Voltage Phasor, Magnitude |
n:u1r:bus1 | p.u. | Voltage Phasor, Real Part |
n:u1i:bus1 | p.u. | Voltage Phasor, Imaginary Part |
n:U1:bus1 | kV | Voltage Phasor, Magnitude |
n:phiu1:bus1 | deg | Voltage Phasor, Angle |
n:U1l:bus1 | kV | Line-Line Voltage Phasor, Magnitude |
n:uln:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Line-Neutral Voltage |
n:Uln:bus1:Aper phase :A, :B, :C, unbalanced only | kV | Line-Neutral Voltage |
n:un:bus1 | p.u. | Neutral-Ground Voltage |
n:Un:bus1 | kV | Neutral-Ground Voltage |
n:ishc:bus1:Aper phase :A, :B, :C, unbalanced only | p.u. | Short-Circuit Current |
n:Ishc:bus1:Aper phase :A, :B, :C, unbalanced only | kA | Short-Circuit Current |
n:inshc:bus1 | p.u. | Neutral Short-Circuit Current, magnitude |
n:Inshc:bus1 | kA | Neutral Short-Circuit Current, magnitude |
n:fe:bus1 | p.u. | Electrical Frequency |
n:dfehz:bus1 | Hz | Deviation of the El. Frequency |
n:fehz:bus1 | Hz | Electrical Frequency |
n:frnom:bus1 | Hz | Nominal Frequency |
s:psie | p.u. | Excitation-Flux |
s:psiD | p.u. | Flux in D-winding |
s:psix | p.u. | Flux in x-winding |
s:psiQ | p.u. | Flux in Q-winding |
s:speed | p.u. | Speed |
s:phi | p.u. | Rotor-angle |
s:pt | p.u. | Turbine Power |
s:xmdm | p.u. | Mechanical Torque |
s:uout | p.u. | Voltage |
s:xspeed | p.u. | Speed |
s:usd | p.u. | Transient Voltage (d-axis) |
s:usq | p.u. | Transient Voltage (q-axis) |
ElmXnet dc load flow results
Read after ComLdf (DC) with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
c:p | MW | Total Active Power |
c:cosn | · | Nominal-Power factor |
c:uini | p.u. | Voltage Setpoint for PV and Slack |
c:iPowerOn | · | Flag |
c:Pdisp | MW | Power (Eco-Dispatch) |
c:Kf | MW/Hz | Frequency Bias |
c:iRefElement | · | Reference Element |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:Pgen:bus1 | MW | Generation, Active Power |
n:Pmot:bus1 | MW | Motor Load, Active Power |
n:Pload:bus1 | MW | General Load, Active Power |
n:Pcomp:bus1 | MW | Compensation (Losses) |
n:Pnet:bus1 | MW | External Networks, Active Power |
n:Pflow:bus1 | MW | Power Flow, Active Power |
s:pset | MW | Active Power Setpoint |
s:dFin | Hz | Frequency Deviation |
s:dF | Hz | Frequency Deviation Output |
ElmXnet modal analysis results
Read after ComMod with GetAttribute. c: calculation parameter, s: signal (state or model variable).
| Attribute | Unit | Description |
|---|---|---|
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:c2 | · | Voltage Coefficient (uknom/ugn) |
c:Te | s | Excitation-Time constant |
c:TD | s | Time constant of D-winding |
c:Tx | s | Time Constant of x-winding |
c:TQ | s | Time Constant of Q-winding |
c:Tag | s | Acceleration Time |
c:xme | p.u. | Electrical Torque |
c:Yd | p.u. | Inverted reactance matrix |
c:Yq | p.u. | Inverted reactance matrix |
c:frnom | Hz | Nominal frequency |
c:hpi | rad/s | Nominal angular frequency |
c:loading | % | Loading |
c:id | · | Direct Axis Current |
c:iq | · | Quadrature Axis Current |
c:ie | · | Excitation Current |
c:xmt | p.u. | Mechanical Torque |
c:addmt | · | Additional Torque |
c:psid | · | Flux in d-axis |
c:psiq | · | Flux in q-axis |
c:pgt | p.u. | Active power |
c:fe | p.u. | El. frequency |
c:xdss | p.u. | Subtransient reactance (d-axis) |
c:xqss | p.u. | Subtransient reactance (q-axis) |
c:Ptspin | MW | Total Turbine Power of Area |
c:Pnomspin | MW | Total Nominal Power of Spinning Machines in Area |
c:Presspin | MW | Spinning Reserve of Area |
c:Tagav | s | System Inertia of Area |
c:p_mag | · | Participation, Magnitude |
c:p_phi | deg | Participation, Angle |
c:p_mags | · | Participation, Magnitude (signed) |
c:lEVec_mag | · | Controllability, Magnitude |
c:lEVec_phi | deg | Controllability, Angle |
c:lEVec_mags | · | Controllability, Magnitude (signed) |
c:rEVec_mag | · | Observability, Magnitude |
c:rEVec_phi | deg | Observability, Angle |
c:rEVec_mags | · | Observability, Magnitude (signed) |
c:droop | · | System regulation |
c:dp | p.u. | Power adjustment due to speed deviation |
c:psidss | p.u. | Subtransient Flux (d-axis) |
c:psiqss | p.u. | Subtransient Flux (q-axis) |
s:psisr | p.u. | Stator Flux, Real Part |
s:psisi | p.u. | Stator Flux, Imaginary Part |
s:psie | p.u. | Excitation-Flux |
s:psiD | p.u. | Flux in D-winding |
s:psix | p.u. | Flux in x-winding |
s:psiQ | p.u. | Flux in Q-winding |
s:speed | p.u. | Speed |
s:phi | p.u. | Rotor-angle |
s:ve | p.u. | Excitation voltage |
s:pt | p.u. | Turbine Power |
s:xmdm | p.u. | Mechanical Torque |
s:uout | p.u. | Voltage |
s:xspeed | p.u. | Speed |
s:fref | p.u. | Reference Frequency |
ElmXnet optimal power flow results
Read after ComOpf with GetAttribute. m: currents, voltages and powers, c: calculation parameter, n: bus result at a terminal.
| Attribute | Unit | Description |
|---|---|---|
m:urnet:bus1 | p.u. | Voltage, Real Part, referred to network |
m:uinet:bus1 | p.u. | Voltage, Imaginary Part, referred to network |
m:u1r:bus1 | p.u. | Positive-Sequence-Voltage, Real Part |
m:u1i:bus1 | p.u. | Positive-Sequence-Voltage, Imaginary Part |
m:u1:bus1 | p.u. | Positive-Sequence-Voltage, Magnitude |
m:U1:bus1 | kV | Line-Ground Positive-Sequence-Voltage, Magnitude |
m:U1l:bus1 | kV | Line-Line Positive-Sequence-Voltage, Magnitude |
m:phiu1:bus1 | deg | Positive-Sequence-Voltage, Angle |
m:irnet:bus1 | p.u. | Current, Real Part, referred to network |
m:iinet:bus1 | p.u. | Current, Imaginary Part, referred to network |
m:inet:bus1 | p.u. | Current, Magnitude, referred to network |
m:I:bus1 | kA | Current, Magnitude |
m:phii:bus1 | deg | Current, Angle |
m:i1r:bus1 | p.u. | Positive-Sequence Current, Real Part |
m:i1i:bus1 | p.u. | Positive-Sequence Current, Imaginary Part |
m:i1:bus1 | p.u. | Positive-Sequence Current, Magnitude |
m:I1:bus1 | kA | Positive-Sequence Current, Magnitude |
m:phii1:bus1 | deg | Positive-Sequence Current, Angle |
m:P:bus1 | MW | Active Power |
m:Q:bus1 | Mvar | Reactive Power |
m:S:bus1 | MVA | Apparent Power |
m:cosphi:bus1 | · | Power Factor |
m:tanphi:bus1 | · | tan(phi) |
m:Psum:bus1 | MW | Total Active Power |
m:Qsum:bus1 | Mvar | Total Reactive Power |
m:Ssum:bus1 | MVA | Total Apparent Power |
m:cosphisum:bus1 | · | Total Power Factor |
m:tanphisum:bus1 | · | Total tan(phi) |
m:i1P:bus1 | p.u. | Positive-Sequence Active Current |
m:i1Q:bus1 | p.u. | Positive-Sequence Reactive Current |
m:I1P:bus1 | kA | Positive-Sequence Active Current |
m:I1Q:bus1 | kA | Positive-Sequence Reactive Current |
m:ur:bus1 | p.u. | Voltage, Real Part |
m:ui:bus1 | p.u. | Voltage, Imaginary Part |
m:u:bus1 | p.u. | Voltage, Magnitude |
m:ir:bus1 | p.u. | Current, Real Part |
m:ii:bus1 | p.u. | Current, Imaginary Part |
m:i:bus1 | p.u. | Current, Magnitude |
m:phiui:bus1 | deg | Angle between Voltage and Current |
m:phiu1i1:bus1 | deg | Angle between Voltage and Current in positive sequence system |
m:Tfct:bus1 | s | Fault Clearing Time |
m:Brkload:bus1 | % | Breaker Loading |
m:Spu:bus1 | MVA/p.u. | Apparent Power per p.u. Voltage |
c:p | MW | Total Active Power |
c:q | Mvar | Total Reactive Power |
c:sgnn | MVA | Total rated apparent power (ngnum*sgn) |
c:cosn | · | Nominal-Power factor |
c:c2 | · | Voltage Coefficient (uknom/ugn) |
c:uini | p.u. | Voltage Setpoint for PV and Slack |
c:iPowerOn | · | Flag |
c:xdq | p.u. | Synchronous Reactance |
c:rs | p.u. | Resistance |
c:i_qlim | · | Reactive power limit reached |
c:Qmin | Mvar | Lower limit of reactive power |
c:Qmax | Mvar | Upper limit of reactive power |
c:sm | MVA | Complex Power |
c:phiini | · | Initial Angle |
c:MaxS | MVA | Max. Apparent Power |
c:Pdisp | MW | Power (Eco-Dispatch) |
c:cst_disp | USD/h | Operating Costs |
c:avgCosts | USD/MWh | Average Costs per MWh |
c:Kf | MW/Hz | Frequency Bias |
c:Kp | p.u. | Active Power Participation |
c:iRefElement | · | Reference Element |
c:nCtrlIter | · | No. of CTRL-iterations |
c:Ploss | MW | Losses (total) |
c:Qloss | Mvar | Reactive-Losses (total) |
c:Plossld | MW | Losses (load) |
c:Qlossld | Mvar | Reactive-Losses (load) |
c:Plossnld | MW | Losses (no load) |
c:Qlossnld | Mvar | Reactive-Losses (no load) |
c:Qtarget | Mvar | Q target value |
c:QtargetDelta | Mvar | Deviation from Q target value |
c:Ptarget | MW | P target value |
c:totRedispatchP | MWh | Total redispatched energy |
c:totRedispatchQ | Mvarh | Total redispatched energy |
c:totRedispatchCosts | USD | Total redispatch costs |
n:ur:bus1 | p.u. | Voltage, Real Part |
n:ui:bus1 | p.u. | Voltage, Imaginary Part |
n:u:bus1 | p.u. | Voltage, Magnitude |
n:upc:bus1 | % | Voltage, Magnitude |
n:du:bus1 | % | Voltage Deviation |
n:U:bus1 | kV | Line-Ground Voltage, Magnitude |
n:phiu:bus1 | deg | Voltage, Angle |
n:phiurel:bus1 | deg | Voltage, Relative Angle |
n:Ul:bus1 | kV | Line-Line Voltage, Magnitude |
n:u1:bus1 | p.u. | Voltage, Magnitude |
n:u1pc:bus1 | % | Voltage, Magnitude |
n:u1r:bus1 | p.u. | Positive-Sequence Voltage, Real Part |
n:u1i:bus1 | p.u. | Positive-Sequence Voltage, Imaginary Part |
n:Pgen:bus1 | MW | Generation, Active Power |
n:Qgen:bus1 | Mvar | Generation, Reactive Power |
n:Pmot:bus1 | MW | Motor Load, Active Power |
n:Qmot:bus1 | Mvar | Motor Load, Reactive Power |
n:Pload:bus1 | MW | General Load, Active Power |
n:Qload:bus1 | Mvar | General Load, Reactive Power |
n:Pcomp:bus1 | MW | Compensation (Losses) |
n:Qcomp:bus1 | Mvar | Compensation |
n:Pnet:bus1 | MW | External Networks, Active Power |
n:Qnet:bus1 | Mvar | External Networks, Reactive Power |
n:Pflow:bus1 | MW | Power Flow, Active Power |
n:Qflow:bus1 | Mvar | Power Flow, Reactive Power |
n:Pout:bus1 | MW | Outgoing Flow, Active Power |
n:Qout:bus1 | Mvar | Outgoing Power, Reactive Power |
n:Sout:bus1 | MVA | Outgoing Power, Apparent Power |
n:cosphiout:bus1 | · | Outgoing Power, Power Factor |
n:Pbalance:bus1 | MW | Active Power Balance (=0) |
n:Qbalance:bus1 | Mvar | Reactive Power Balance (=0) |
n:LossPdown:bus1 | MW | Losses, downstream |
n:LossQdown:bus1 | Mvar | Losses, downstream (Reactive Power) |
n:LossPdownload:bus1 | MW | Load losses, downstream |
n:LossQdownload:bus1 | Mvar | Load losses, downstream |
n:LossPdownnoload:bus1 | MW | No load losses, downstream |
n:LossQdownnoload:bus1 | Mvar | No load losses, downstream |
n:du_feed:bus1 | % | Difference from voltage at start of feeder |
ElmXnet basic data
b: values are worked out from the input data. Read them; they are not set.
| Attribute | Unit | Description |
|---|---|---|
b:loc_name | · | Name |